{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A37606363","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A37606363","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A37606363","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A37606363","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A37606363, medium-voltage AC drive, 2918 kW motor power, 3490 kVA apparent power, 36-pulse diode rectifier, floor-standing enclosure, CE.","salesMarkdown":"## 2918 kW, 3490 kVA — medium-voltage mill drive The ATV1200A37606363: Rated motor power of 2918 kW with an apparent power of 3490 kVA and line current of 320 A. The supply voltage limits span 2970–3630 V — this is a medium-voltage drive, not a 480 V class unit, so the incoming transformer and switchgear must be rated for the 3 kV class. The 36-pulse diode rectifier front end delivers inherently low line-current harmonic distortion without an active front end or external filter bank. For a hot-strip mill or large pump/fan installation, this simplifies harmonic compliance studies and avoids the cost of a multi-pulse transformer. ## Overload profile and duty cycle Standard overload rating: 1.2 × rated current for 60 seconds, 1.5 × for 3 seconds. High-overload rating: 1.5 × for 60 seconds, 1.85 × for 3 seconds. The high-overload curve suits applications with intermittent peak torque demands — crushers, mixers, or mill table drives where the load spikes during breakaway. The drive handles both synchronous and asynchronous motors, so it can replace an older DC drive on a mill stand or drive a new synchronous motor for a high-efficiency retrofit. ## Physical footprint and facility planning Floor-standing enclosure with separate air flows for the transformer and power cells. Standard-efficiency configuration: 6670 mm wide × 1700 mm deep × 2670 mm high. High-efficiency configuration: same footprint but 2970 mm tall. The 80 dB noise level means hearing protection zones around the drive cabinet are mandatory. Cooling air volume is 33,000 m³/h for both efficiency variants. The forced-convection cooling system requires a dedicated HVAC supply sized for that airflow — not a trivial plant engineering detail. Operating position is vertical ±10 degrees. ## Standards and isolation CE marked. Designed to EN/IEC 61800-3 (EMC), EN/IEC 61800-4 (harmonics), EN/IEC 61800-5-1 (safety), EN/IEC 60204-11 (machinery), and EN/IEC 60529 (enclosure protection). Pollution degree 2 per EN/IEC 61800-5-1 — typical for controlled electrical rooms, but not for dusty mill environments without supplementary cabinet filtration. Electrical isolation between power and control circuits. Dielectric strength tested at 20 kV AC between earth and power terminals — confirms the medium-voltage isolation barrier is intact for the 3 kV class supply. Prospective line short-circuit current rated at 31.5 kA for 150 ms. Overvoltage category II per EN/IEC 61800-5-1. ## Altitude and environment derating Standard operating altitude is 1000 m. Above that, derate output current by 0.6 % per 100 m up to 2000 m. For a mill at 1500 m elevation, the effective current capability drops by 3 % — factor this into the motor sizing if the drive is already at the overload limit. Relative humidity range 0–90 % standard, 0–95 % optional. The drive includes ground fault protection and an integrated EMC filter. ## I/O complement and control wiring Four software-configurable analogue inputs (0–20 mA / 4–20 mA, 24 V max, 250 Ω impedance). One analogue output of the same type. Six discrete inputs standard, expandable to ten. The 220 V AC control supply requires a 3 kVA external transformer — not included in the drive cabinet. Main power connection via M10 screw-type bar terminals accepting 6 × 40 mm² cable, entry from bottom or top. The internal cooling fan supply is 380 V AC; an optional external 220 V AC/DC control supply is available.","metaTitle":"Schneider Electric ATV1200A37606363 Altivar 1200, 2918 kW","metaDescription":"Schneider Electric ATV1200A37606363 Altivar 1200 medium-voltage drive. 2918 kW motor power, 3490 kVA apparent power, 36-pulse rectifier, CE marked.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1700 mm (high efficiency) 1700 mm (standard efficiency)","Width":"6670 mm (standard efficiency) 6670 mm (high efficiency)","title":"ATV1200A37606363","Height":"2670 mm standard efficiency 2970 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"36 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6.3 kV - 3490 kVA","Line current":"320 A","Apparent power":"3490 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"2918 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 18 x power cells","Product destination":"Synchronous motors Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"33000 m3/h (standard efficiency) 33000 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP31 IP41 IP42","Network number of phases":"3 phases","Continuous output current":"320 A (standard overload) 256 A (high overload)","Maximum transient current":"384 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6.3 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Closed-loop control with encoder Vector control with sensor, optional Voltage/frequency ratio (V/f) Sensorless flux vector control","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"117 kW (standard efficiency) 102 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A37606363?filename=Schneider+Electric_Altivar-1200_ATV1200A37606363.pdf', 'path_name': 'edebeda33beccdadb879f32dd8dd012b.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/edebeda33beccdadb879f32dd8dd012b.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A37606363/medium-voltage-variable-speed-drive-atv1200-6-3-kv-3490-kva/"},"ai":{"faq":[{"question":"What are the key electrical ratings for ATV1200A37606363?","answer":"Motor power 2918 kW, apparent power 3490 kVA, line current 320 A, supply voltage range 2970–3630 V. The 36-pulse diode rectifier keeps input harmonics low without an active front end."},{"question":"What compliance documentation does Schneider Electric provide for this drive?","answer":"CE marked. Designed to EN/IEC 61800-3, 61800-4, 61800-5-1, EN/IEC 60204-11, and EN/IEC 60529. Pollution degree 2. Dielectric strength tested at 20 kV AC between earth and power terminals."},{"question":"What is the physical footprint of the ATV1200A37606363?","answer":"Floor-standing enclosure: 6670 mm wide × 1700 mm deep. Height is 2670 mm for standard efficiency, 2970 mm for high efficiency. Cooling air volume is 33,000 m³/h. Noise level 80 dB."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A37606363","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A37606363 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}