{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A39406060","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A39406060","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A39406060","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A39406060","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A39406060 medium-voltage variable speed drive, 3294 kW motor power, 30-pulse diode rectifier, 2970-3630 V supply, floor-standing enclosure.","salesMarkdown":"## Floor-standing MV drive — 3294 kW, 30-pulse input The ATV1200A39406060 is a medium-voltage variable speed drive from the Altivar 1200 series, rated for 3294 kW motor power with a 30-pulse diode rectifier bridge input stage. The 30-pulse topology keeps line-side harmonics low enough to meet IEEE 519 without an active front end or external filter — a real advantage for sites with weak utility connections or strict power-quality requirements. Supply voltage range is 2970...3630 V, so this is a medium-voltage drive (not LV), and the output voltage equals the supply voltage minus internal drops. The 30-pulse rectifier draws 410 A line current at the rated apparent power of 3940 kVA. ## Physical footprint and enclosure — expect a large floor-standing cabinet The drive ships in a floor-standing enclosure with separate air flows for power and control sections. Dimensions are substantial: depth 1700 mm, width 6070 mm, and height 2670 mm (standard efficiency) or 2970 mm (high efficiency). Plan for a dedicated equipment room or outdoor shelter with crane access — this is not a panel-mount unit. Cooling is forced convection with 29700 m³/h airflow (both efficiency variants). The noise level at full load is 80 dB — hearing protection in the vicinity is expected. Operating position is vertical within ±10 degrees. ## What is inside — 15 power cells, transformer, HMI The drive comprises 2 plinths, a phase-shifting transformer, medium-voltage arrestors, cooling fans, a human-machine interface, and 15 power cells. The multilevel cell topology gives near-sinusoidal output voltage, reducing motor stress and bearing currents compared to two-level MV drives. Electrical isolation between power and control circuits is maintained, with dielectric strength tested at 20 kV AC between earth and power terminals. Overvoltage category is II per EN/IEC 61800-5-1, and pollution degree is 2. ## Overload capability and motor compatibility The drive supports both standard and high overload profiles. Standard overload: 1.2 × In for 60 s or 1.5 × In for 3 s. High overload: 1.5 × In for 60 s or 1.85 × In for 3 s. This lets you match the drive to either constant-torque (conveyor, extruder) or variable-torque (pump, fan) loads without oversizing. It is designed for both asynchronous (induction) and synchronous motors, with a speed range of 20...100 %. The integrated EMC filter simplifies compliance with EN/IEC 61800-3 emission limits. ## I/O and control wiring Control wiring connects to 4 software-configurable analogue inputs (0...20 mA / 4...20 mA, 24 V max, 250 Ω impedance) and 2 analogue outputs (same current range). Discrete inputs number 6 standard, expandable to 10. The control supply is 220 V AC, 3 kVA, with an optional 220 V AC/DC external supply. Main power connection uses M10 bar-type terminals accepting 6 × 40 mm² conductors, entry from top or bottom. The prospective line short-circuit current withstand is 31.5 kA for 150 ms. ## Lifecycle and sourcing — active production, quoted to order The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1.","metaTitle":"ATV1200A39406060 Altivar 1200 MV Drive, 3294 kW, 30-Pulse","metaDescription":"ATV1200A39406060 medium-voltage drive, 3294 kW motor power, 30-pulse rectifier, 2970–3630 V supply. Active production. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1700 mm (high efficiency) 1700 mm (standard efficiency)","Width":"6070 mm (high efficiency) 6070 mm (standard efficiency)","title":"ATV1200A39406060","Height":"2670 mm standard efficiency 2970 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"30 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6 kV - 3940 kVA","Line current":"410 A","Apparent power":"3940 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"3294 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 15 x power cells","Product destination":"Asynchronous motors Synchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"29700 m3/h (standard efficiency) 29700 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP31 IP42","Network number of phases":"3 phases","Continuous output current":"379 A (standard overload) 303 A (high overload)","Maximum transient current":"455 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder","Asynchronous motor control profile":"Vector control with sensor, optional Sensorless flux vector control Voltage/frequency ratio (V/f) Closed-loop control with encoder","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"132 kW (standard efficiency) 115 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A39406060?filename=Schneider+Electric_Altivar-1200_ATV1200A39406060.pdf', 'path_name': '3abd7d6b717d67846a046453fa9d2271.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/3abd7d6b717d67846a046453fa9d2271.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A39406060/medium-voltage-variable-speed-drive-atv1200-6-kv-3940-kva/"},"ai":{"faq":[{"question":"What compliance documentation does this drive carry?","answer":"CE marked, compliant with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 (safety). The integrated EMC filter is standard."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A39406060","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A39406060 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}