{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A50001010","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A50001010","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A50001010","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A50001010","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A50001010 medium-voltage AC drive, 4180 kW motor power, 5000 kVA apparent power, 48-pulse diode rectifier input, 2970...3630 V supply, floor-standing enclosure.","salesMarkdown":"Rated 4180 kW motor power at 5000 kVA apparent power, the ATV1200A50001010 is sized for large asynchronous motor loads — pumps, compressors, fans, and conveyors in the 4 MW class. The 48-pulse diode rectifier bridge on the input side keeps line-side harmonics low enough to meet IEEE 519 without a separate filter in most installations. Supply voltage range is 2970...3630 V — this is a medium-voltage drive, not a 480 V unit. The output voltage tracks the supply voltage, so the motor winding insulation and cable rating must match the incoming line voltage. Overload capability is defined in four profiles: 1.2× In for 60 s and 1.5× In for 3 s under standard overload, plus 1.5× In for 60 s and 1.85× In for 3 s under high overload. The high-overload profile supports starting high-inertia loads or clearing short-duration process peaks without oversizing the drive. ## Floor-standing enclosure and cooling — installation constraints The drive ships in a floor-standing enclosure measuring 1600 mm deep by 9070 mm wide by 3040 mm high. That footprint requires a dedicated equipment room with front and rear access for cable entry and maintenance. The enclosure has separate air flows for the power section and control compartment, with forced-convection cooling moving 56400 m³/h of air. Power connections are bar-type M10 screw terminals accepting up to 6 × 40 mm² per phase, with cable entry from the top or bottom. The main power cell assembly includes 24 individual power cells, a phase-shifting transformer, medium-voltage arrestors, and cooling fans — all field-replaceable subassemblies. Operating position is vertical within ±10 degrees. Altitude derating starts at 1000 m: 0.6 % current derating per 100 m above that. Ambient relative humidity range is 0...90 % (0...95 % optional). ## Standards compliance and protection — what the certifications cover The drive carries CE marking and complies with EN/IEC 60204-11 (electrical equipment of machines), EN/IEC 60529 (enclosure protection), EN/IEC 61800-3 (EMC for adjustable-speed drives), EN/IEC 61800-4 (drive system requirements), and EN/IEC 61800-5-1 (electrical, thermal, and energy safety). The integrated EMC filter covers conducted emissions for industrial environments. Electrical isolation between power and control circuits is maintained. Dielectric strength is 28 kV AC between earth and power terminals. Overvoltage category II per EN/IEC 61800-5-1, pollution degree 2. Prospective line short-circuit current withstand is 31.5 kA for 150 ms. Ground fault protection is built into the drive. Noise level at full load is 80 dB — hearing protection is required within the equipment room during operation. ## Control interface and I/O complement The control section has 4 software-configurable analogue inputs (0...20 mA / 4...20 mA, 24 V max, 250 Ohm impedance) and 1 analogue output (0...20 mA / 4...20 mA DC, 250 Ohm impedance). Discrete inputs: 6 standard, expandable to 10 with the optional card. Control power supply is 220 V AC, 3 kVA, with an optional 220 V AC/DC external supply. The cooling fan supply is 380 V AC, also with an optional external feed. The human-machine interface is included as part of the standard product composition. ## Sourcing and lifecycle — active production, quoted to order The drive is supplied as a complete floor-standing assembly including the phase-shifting transformer, power cells, cooling fans, HMI, and medium-voltage arrestors. Spare subassemblies (power cells, fan modules, control boards) are available separately through the same sourcing channel.","metaTitle":"Schneider ATV1200A50001010 AC Drive, 4180 kW, 5000 kVA","metaDescription":"Schneider Electric ATV1200A50001010 medium-voltage AC drive, 4180 kW motor power, 5000 kVA apparent power, 48-pulse input. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1600 mm (standard efficiency)","Width":"9070 mm (standard efficiency)","title":"ATV1200A50001010","Height":"3040 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"48 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 10 kV - 5000 kVA","Line current":"320 A","Apparent power":"5000 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"4180 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"28 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 24 x power cells","Product destination":"Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"56400 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP42 IP41 IP31","Network number of phases":"3 phases","Continuous output current":"289 A (standard overload) 231 A (high overload)","Maximum transient current":"346 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"10 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder","Asynchronous motor control profile":"Sensorless flux vector control Vector control with sensor, optional Voltage/frequency ratio (V/f) Closed-loop control with encoder","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"163 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A50001010?filename=Schneider+Electric_Altivar-1200_ATV1200A50001010.pdf', 'path_name': 'db3f9fddd4c39670421b139d62870399.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/db3f9fddd4c39670421b139d62870399.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A50001010/medium-voltage-variable-speed-drive-atv1200-10-kv-5000-kva/"},"ai":{"faq":[{"question":"What is the motor power rating of ATV1200A50001010?","answer":"The drive is rated for 4180 kW motor power at 5000 kVA apparent power, with a supply voltage range of 2970...3630 V."},{"question":"What compliance documentation does Schneider Electric provide for ATV1200A50001010?","answer":"The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. An integrated EMC filter is included."},{"question":"How can I order ATV1200A50001010 or check availability?","answer":"The drive is sourced to order against the BOM quantity through authorized distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A50001010","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A50001010 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}