{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A55401010","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A55401010","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A55401010","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A55401010","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A55401010 medium-voltage variable speed drive, 4631 kW motor power, 2970-3630 V supply, 48-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"## What this MV drive delivers The ATV1200A55401010 is a medium-voltage variable speed drive from the Altivar 1200 family, built for asynchronous motor control in the 4.6 MW range. It accepts a 2970–3630 V supply through a 48-pulse diode rectifier bridge, which keeps input harmonics low enough to meet IEEE 519 without an external filter. Rated motor power is 4631 kW with an apparent power of 5540 kVA and a line current of 320 A. The output voltage tracks the supply voltage, so the motor sees the full incoming line. The drive is assembled in a floor-standing enclosure with separate airflow paths for the power cells and the control section — a design that keeps heat from the transformer and cells away from the electronics. Forced convection cooling moves 56,400 m³/h of air at standard efficiency. ## Internal build and I/O complement Control I/O: four software-configurable analogue inputs (0–20 mA / 4–20 mA, 250 Ω impedance, 24 V max) and one analogue output of the same type. Six discrete inputs are standard, expandable to ten. The control supply is 220 V AC, 3 kVA, with an optional 220 V AC/DC external supply; the cooling fan runs on a separate 380 V AC feed. ## Overload capacity and protection envelope Overload withstand is defined for two duty classes: standard overload handles 1.2× rated current for 60 s and 1.5× for 3 s; high overload handles 1.5× for 60 s and 1.85× for 3 s. This lets the drive ride through motor starting and process upsets without tripping. Ground fault protection is built in. The dielectric strength between earth and power terminals is 28 kV AC, and the prospective line short-circuit current rating is 31.5 kA for 150 ms — enough to coordinate with upstream MV switchgear in most industrial distributions. The drive is CE marked and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1. ## Siting and environmental limits Physical envelope: 1600 mm deep, 9070 mm wide, 3040 mm high. The drive must be installed vertically within ±10° and in an area with relative humidity 0–90 % (0–95 % optional). Operating altitude is 1000–2000 m with a current derating of 0.6 % per 100 m above 1000 m. Vibration resistance is 4.9 m/s² over 10–50 Hz. The noise level at full load is 80 dB — hearing protection is advisable near the enclosure. The main power connection uses M10 screw-type bar terminals accepting up to 6 × 40 mm² cable per phase, entry from bottom or top.","metaTitle":"Schneider Altivar 1200 ATV1200A55401010, 4631 kW MV Drive","metaDescription":"Altivar 1200 medium-voltage drive, 4631 kW, 2970-3630 V input, 48-pulse rectifier. CE marked, EN/IEC 61800-3. Current production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1600 mm (standard efficiency)","Width":"9070 mm (standard efficiency)","title":"ATV1200A55401010","Height":"3040 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"48 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 10 kV - 5540 kVA","Line current":"320 A","Apparent power":"5540 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"4631 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"28 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 24 x power cells","Product destination":"Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"56400 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP42 IP41 IP31","Network number of phases":"3 phases","Continuous output current":"320 A (standard overload) 256 A (high overload)","Maximum transient current":"384 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"10 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Closed-loop control with encoder Sensorless flux vector control Voltage/frequency ratio (V/f) Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"181 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A55401010?filename=Schneider+Electric_Altivar-1200_ATV1200A55401010.pdf', 'path_name': '1d395c4416f8874330ff3d2b7d83c4bd.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/1d395c4416f8874330ff3d2b7d83c4bd.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A55401010/medium-voltage-variable-speed-drive-atv1200-10-kv-5540-kva/"},"ai":{"faq":[{"question":"What is the motor power rating of ATV1200A55401010?","answer":"The drive is rated for 4631 kW motor power with an apparent power of 5540 kVA and a line current of 320 A."},{"question":"What compliance documentation does this drive carry?","answer":"CE marked, compliant with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Pollution degree 2, overvoltage category II."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A55401010","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A55401010 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}