{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A74505555","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A74505555","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A74505555","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A74505555","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A74505555 medium-voltage AC drive, 6228 kW motor power, 7450 kVA apparent power, 2970-3630 V input, floor-standing enclosure.","salesMarkdown":"## What this drive delivers — 6228 kW at medium voltage The ATV1200A74505555 is a Schneider Electric Altivar 1200 medium-voltage AC drive rated for 6228 kW motor power with 7450 kVA apparent power. Input voltage limits are 2970 to 3630 V AC, fed through a 30-pulse diode rectifier bridge that keeps line-side harmonics low enough to skip a separate filter in many installations. This is a floor-standing unit — the assembly style is an in-floor-standing enclosure with separate air flows for the power section and control electronics. The enclosure measures 3040 mm high by 8970 mm wide by 1700 mm deep (standard efficiency variant) and requires 90000 m³/h of cooling air through forced convection. ## Overload profile and protection Overload withstand is specified for both standard and high-overload duty cycles: 1.2× In for 60 s or 1.5× In for 3 s under standard overload; 1.5× In for 60 s or 1.85× In for 3 s under high overload. The drive includes ground-fault protection on the drive side and has a dielectric strength of 20 kV AC between earth and power terminals. Prospective line short-circuit current rating is 31.5 kA for 150 ms, and the unit carries CE marking with compliance to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Pollution degree 2 per EN/IEC 61800-5-1 and overvoltage category II apply. ## What ships in the enclosure The product composition includes 2 plinths, a phase-shifting transformer, medium-voltage arrestors, cooling fans, a human-machine interface, and 15 power cells. Control supply is 220 V AC at 3 kVA external; the cooling fan runs on 380 V AC internal supply, with optional external supply variants for both. Electrical connection uses bar-type screw terminals M10 with clamping capacity for 6 x 40 mm² conductors on /R, /S, L3/T, entry from bottom or top. The enclosure colour is grey RAL 7032.","metaTitle":"Schneider ATV1200A74505555 Altivar 1200 VFD, 6228 kW","metaDescription":"Schneider Electric ATV1200A74505555 Altivar 1200 medium-voltage VFD. 6228 kW motor power, 7450 kVA apparent power, 2970-3630 V input. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1700 mm (standard efficiency)","Width":"8970 mm (standard efficiency)","title":"ATV1200A74505555","Height":"3040 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"30 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 5.5 kV - 7450 kVA","Line current":"850 A","Apparent power":"7450 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"6228 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 15 x power cells","Product destination":"Asynchronous motors Synchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"90000 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP42 IP41 IP31","Network number of phases":"3 phases","Continuous output current":"780 A (standard overload) 624 A (high overload)","Maximum transient current":"936 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"5.5 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Vector control with sensor, optional Voltage/frequency ratio (V/f) Sensorless flux vector control Closed-loop control with encoder","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"206 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A74505555?filename=Schneider+Electric_Altivar-1200_ATV1200A74505555.pdf', 'path_name': '6f89c233c0018111544f6710555f3383.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/6f89c233c0018111544f6710555f3383.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A74505555/medium-voltage-variable-speed-drive-atv1200-5-5-kv-7450-kva/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for ATV1200A74505555?","answer":"The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A74505555","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A74505555 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}