{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A85506363","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A85506363","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A85506363","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A85506363","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A85506363, medium-voltage AC drive, 6571 kW motor power, 7860 kVA apparent power, 36-pulse diode rectifier, 2970–3630 V supply, floor-standing enclosure.","salesMarkdown":"## Physical scale and installation footprint The ATV1200A85506363: The enclosure has separate air flows for the power section and control compartment, with forced convection cooling moving 100,000 m³/h of air. The operating position is vertical ±10 degrees. Ambient conditions: 0–90 % relative humidity (0–95 % optional), altitude up to 2000 m with 0.6 % derating per 100 m above 1000 m. ## Power rating and motor duty Rated for 6571 kW motor power at 7860 kVA apparent power, drawing 720 A line current from a 2970–3630 V supply. The output voltage is equal to or less than the supply voltage. This drive is intended for large asynchronous motors — think induced-draft fans, boiler feed pumps, or mainline conveyor drives in heavy industry. Overload capability is defined in four tiers: 1.2× rated current (In) for 60 s standard duty, 1.5× In for 3 s standard, 1.5× In for 60 s high overload, and 1.85× In for 3 s high overload. The standard overload profile suits variable-torque loads like centrifugal pumps and fans; the high overload profile covers constant-torque loads such as conveyors or extruders that need higher starting torque. ## Input topology and harmonic mitigation The 36-pulse diode rectifier bridge input inherently cancels the 5th, 7th, 11th, 13th, 17th, and 19th harmonics, keeping total harmonic current distortion (THID) below 5 % at full load without external filters. This meets IEEE 519 requirements for the point of common coupling without additional line reactors or active filters — a significant advantage for installations where utility-imposed harmonic limits are tight. The integrated EMC filter and electrical isolation between power and control circuits further simplify compliance with EN/IEC 61800-3 (emission and immunity for adjustable-speed drives) and EN/IEC 61800-5-1 (safety requirements). The drive carries CE marking. ## Protection, isolation, and fault handling Ground fault protection is integral to the drive. Dielectric strength is 20 kV AC between earth and power terminals. The drive is rated for overvoltage category II per EN/IEC 61800-5-1 and pollution degree 2. Prospective short-circuit current withstand is 31.5 kA for 150 ms — this sets the minimum SCCR for the upstream protective device. Vibration resistance is 4.9 m/s² over 10–50 Hz. Noise level is 80 dB — hearing protection is required within the enclosure vicinity during operation. ## Control interface and I/O complement Four software-configurable analogue inputs accept 0–20 mA or 4–20 mA current signals, 24 V max, 250 Ω impedance. Two analogue outputs are similarly configurable for 0–20 mA or 4–20 mA DC. Six discrete inputs are standard, expandable to ten. The external control supply is 220 V AC, 3 kVA, with an optional 220 V AC/DC supply. Cooling fans draw 380 V AC from an internal supply.","metaTitle":"Schneider Electric ATV1200A85506363 Altivar 1200 VFD","metaDescription":"Schneider Electric ATV1200A85506363 Altivar 1200 AC drive. 6571 kW motor power, 7860 kVA, 36-pulse input, 2970–3630 V supply. Floor-standing, active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1700 mm (standard efficiency)","Width":"9770 mm (standard efficiency)","title":"ATV1200A85506363","Height":"3040 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"36 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6.3 kV - 7860 kVA","Line current":"720 A","Apparent power":"7860 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"6571 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 18 x power cells","Product destination":"Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"100000 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP42 IP31","Network number of phases":"3 phases","Continuous output current":"720 A (standard overload) 576 A (high overload)","Maximum transient current":"864 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6.3 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder Vector control with sensor, optional Sensorless flux vector control","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"217 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A85506363?filename=Schneider+Electric_Altivar-1200_ATV1200A85506363.pdf', 'path_name': '37007b6229da05cd778248552e3cbdc4.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/37007b6229da05cd778248552e3cbdc4.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A85506363/medium-voltage-variable-speed-drive-atv1200-6-3-kv-7860-kva/"},"ai":{"faq":[{"question":"What are the key power ratings for the ATV1200A85506363?","answer":"Motor power is 6571 kW, apparent power is 7860 kVA, line current is 720 A, and the supply voltage range is 2970–3630 V. The input is a 36-pulse diode rectifier."},{"question":"What overload ratings does this drive support?","answer":"Standard overload: 1.2× In for 60 s and 1.5× In for 3 s. High overload: 1.5× In for 60 s and 1.85× In for 3 s. The high overload profile is suited for constant-torque loads requiring higher starting torque."},{"question":"What compliance standards does the ATV1200A85506363 meet?","answer":"It complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. It carries CE marking."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A85506363","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A85506363 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}