{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A9006363","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A9006363","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A9006363","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A9006363","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A9006363 medium-voltage AC drive, 686 kW motor power, 820 kVA apparent power, 36-pulse diode rectifier input, 3.0-3.63 kV supply, floor-standing enclosure.","salesMarkdown":"## Medium-voltage drive for large synchronous and asynchronous motors The Schneider Electric ATV1200A9006363 is a medium-voltage AC drive from the Altivar 1200 series, designed to control both asynchronous and synchronous motors up to 686 kW from a 3.0 to 3.63 kV supply. It delivers 820 kVA apparent power and draws 100 A line current through a 36-pulse diode rectifier bridge, which inherently reduces line-side harmonics below IEEE 519 thresholds without external filters. The drive is assembled in a floor-standing enclosure with separate air flows for the power section and control electronics, a design that keeps the control cabinet cooler and reduces dust ingress on the logic boards. Forced convection cooling moves 13,200 m³/h in the standard-efficiency configuration and 19,800 m³/h in the high-efficiency variant, so the installation room must have adequate intake and exhaust louver area to match these volumes. ## Overload capacity and protection envelope The overload withstand profile is specified for both standard and high overload duty: 1.2 × In for 60 s or 1.5 × In for 3 s under standard overload, and 1.5 × In for 60 s or 1.85 × In for 3 s under high overload. This means the drive can handle a 185 % current surge for three seconds — enough to clear a downstream fault or accelerate a high-inertia load without tripping. The 60-second overload at 120 % covers most starting profiles for centrifugal pumps and fans. Ground fault protection is integrated into the drive, and the dielectric strength between earth and power terminals is rated at 20 kV AC. The prospective line short-circuit current withstand is 31.5 kA for 150 ms, so the upstream breaker coordination must be set to clear within that window to avoid damage to the input rectifier. The drive carries CE marking and complies with EN/IEC 61800-3 (EMC), EN/IEC 61800-4 (adjustable speed drives), and EN/IEC 61800-5-1 (safety). An integrated EMC filter is included, which simplifies panel design for installations that need to meet conducted emission limits without an add-on filter box. ## Control supply and I/O architecture The control electronics require an external 220 V AC supply at 3 kVA; the cooling fans draw from a separate 380 V AC supply. This split lets the control remain powered for diagnostics even when the main fan circuit is off. An optional external 220 V AC/DC supply for control is also available. The drive provides four software-configurable analogue inputs (0-20 mA / 4-20 mA, 24 V max, 250 Ω impedance) and one analogue output of the same type. Discrete inputs number six standard, expandable to ten with an optional card. Electrical isolation between power and control circuits is maintained, so the 24 V I/O loop can share a common with the PLC without ground-loop issues. ## Physical footprint and site preparation The enclosure dimensions vary by efficiency tier: standard efficiency measures 3060 mm wide × 2520 mm high × 1400 mm deep; high efficiency is 3660 mm wide × 2670 mm high × 1500 mm deep. The operating altitude range is 1000 to 2000 m with a current derating of 0.6 % per 100 m above 1000 m — at 1800 m, expect a 4.8 % reduction in available output current. Power connections use M10 bar-type screw terminals with a clamping capacity of 6 × 40 mm² per phase, with cable entry from the bottom or top. The operating position is vertical ±10°, and the enclosure is grey (RAL 7032). Vibration resistance is 4.9 m/s² from 10 to 50 Hz, which is adequate for most industrial floor installations but not for direct mounting on a reciprocating compressor skid without isolation pads.","metaTitle":"Schneider Electric ATV1200A9006363 AC Drive, 686 kW","metaDescription":"Schneider Electric ATV1200A9006363 medium-voltage AC drive, 686 kW motor power, 820 kVA, 36-pulse input. CE marked, active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1400 mm (standard efficiency) 1500 mm (high efficiency)","Width":"3060 mm (standard efficiency) 3660 mm (high efficiency)","title":"ATV1200A9006363","Height":"2520 mm standard efficiency 2670 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"36 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6.3 kV - 820 kVA","Line current":"100 A","Apparent power":"820 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"686 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 18 x power cells","Product destination":"Asynchronous motors Synchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"13200 m3/h (standard efficiency) 19800 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP31 IP42","Network number of phases":"3 phases","Continuous output current":"75 A (standard overload) 60 A (high overload)","Maximum transient current":"90 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6.3 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f) Sensorless flux vector control Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"27 kW (standard efficiency) 24 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A9006363?filename=Schneider+Electric_Altivar-1200_ATV1200A9006363.pdf', 'path_name': 'ff4cf904964a1dbac876cf8bcbb37cf8.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/ff4cf904964a1dbac876cf8bcbb37cf8.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A9006363/medium-voltage-variable-speed-drive-atv1200-6-3-kv-820-kva/"},"ai":{"faq":[{"question":"What motor types does the ATV1200A9006363 support?","answer":"The drive is designed for both asynchronous (induction) and synchronous motors up to 686 kW. The speed range is 20 to 100 % of base speed."},{"question":"What is the input topology and how does it affect harmonics?","answer":"The input is a 36-pulse diode rectifier bridge. A 36-pulse configuration cancels the 5th, 7th, 11th, 13th, 17th, and 19th harmonics, bringing line-side distortion well below IEEE 519 limits without an active filter or multi-pulse transformer."},{"question":"What compliance documentation does Schneider Electric provide for ATV1200A9006363?","answer":"The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. The integrated EMC filter supports conducted emission compliance per the drive standard."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A9006363","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A9006363 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}