{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A9404242","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A9404242","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A9404242","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A9404242","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A9404242 AC Drive (VFD), 786 kW motor power, 2970-3630 V supply, 24-pulse diode rectifier, floor-standing enclosure, CE.","salesMarkdown":"## 786 kW medium-voltage drive with 24-pulse input The ATV1200A9404242 is a Schneider Electric Altivar 1200 series medium-voltage AC drive rated for 786 kW motor power at a supply voltage range of 2970 to 3630 V. Its 24-pulse diode rectifier bridge input reduces line-side harmonics below IEEE 519 thresholds without an external filter — a key advantage for installations with weak grid connections or strict power-quality requirements. The drive delivers 940 kVA apparent power and draws 150 A line current at full load. Overload capability is configurable: 1.2× rated current for 60 seconds (standard duty) or 1.5× for 60 seconds (high overload), with a short-term peak of 1.85× for 3 seconds — enough to handle crusher or centrifuge starting torque without oversizing the drive. ## Physical footprint and cooling demands The drive ships in a floor-standing enclosure with separate air flows for power and control sections. Standard-efficiency models measure 3060 mm wide × 1400 mm deep × 2520 mm high; high-efficiency variants are wider (3660 mm) and taller (2670 mm). The enclosure colour is grey RAL 7032. Forced convection cooling moves 13,200 m³/h (standard) or 19,800 m³/h (high efficiency) of air. The cooling fan requires its own 380 V AC supply — either internal or optional external. Noise level at full fan speed is 80 dB, so ear protection is advisable during commissioning in an enclosed room. ## Compliance and isolation architecture The ATV1200A9404242 carries CE marking and complies with EN/IEC 61800-3 (EMC), EN/IEC 61800-4 (harmonic), and EN/IEC 61800-5-1 (safety). Dielectric strength between earth and power terminals is 20 kV AC. Pollution degree 2 per EN/IEC 61800-5-1, overvoltage category II — suitable for clean indoor industrial environments. Electrical isolation between power and control circuits means the 24 V DC control supply (220 V AC, 3 kVA external) can be referenced to a separate ground from the medium-voltage power section — a practical advantage when integrating with PLCs on a different earthing system. ## I/O complement and connection The drive includes 4 software-configurable analogue inputs (0–20 mA / 4–20 mA, 250 Ω impedance) and 2 analogue outputs of the same type. Digital inputs: 6 standard, expandable to 10 with an optional card. The line-side power connection uses M10 bar-type screw terminals accepting up to 6 × 40 mm² cable per phase, entry from bottom or top. Prospective line short-circuit current withstand is 31.5 kA for 150 ms — coordinate the upstream breaker to clear within this window to avoid drive damage. Ground fault protection is built into the drive itself, not reliant on external relays. ## Environmental limits and derating Operating altitude from 1000 m to 2000 m requires current derating of 0.6 % per 100 m above 1000 m. Relative humidity range is 0–90 % (0–95 % optional). Operating position is vertical ±10 degrees. Vibration resistance is 4.9 m/s² at 10–50 Hz — adequate for standard floor-mounted installations but not for direct mounting on vibrating machinery. The drive is designed for both synchronous and asynchronous motors, with a speed range of 20–100 % of base speed. Output voltage is limited to ≤ supply voltage — typical for a VSI topology.","metaTitle":"Schneider Electric ATV1200A9404242 AC Drive, 786 kW, 3630 V","metaDescription":"Schneider Electric ATV1200A9404242 Altivar 1200 medium-voltage VFD, 786 kW, 2970-3630 V input, 24-pulse rectifier, CE marked. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"1400 mm (standard efficiency) 1500 mm (high efficiency)","Width":"3060 mm (standard efficiency) 3660 mm (high efficiency)","Height":"2520 mm standard efficiency 2670 mm high efficiency","Current":"150 A","IP Rating":"IP41 / IP42 / IP31","Input Type":"24 pulse diode rectifier bridge","Coil Voltage":"220 V","Product Status":"Active","Protection Type":"Ground fault protection: drive","Pollution Degree":"Pollution degree 2","Temp Storage Max":"60 °C","Temp Storage Min":"-10 °C","Operating Position":"Vertical +/- 10 degree","Temp Operating Max":"50 °C","Temp Operating Min":"0 °C","Temperature Storage":"-10...60 °C","Ambient Air Temperature Operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A9404242/medium-voltage-variable-speed-drive-atv1200-4-16-kv-940-kva/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV1200A9404242/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A9404242","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A9404242 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}