{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212HD11N4LCD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212HD11N4LCD","canonicalUrl":"https://aoctrl.com/schneider/ATV212HD11N4LCD","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212HD11N4LCD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 ATV212HD11N4LCD AC drive, 11 kW / 15 hp, 480 V, 16.8 A line current, integrated C2 EMC filter, RS-485 Modbus, IP20.","salesMarkdown":"## 11 kW / 15 hp at 480 V — the Altivar 212 mid-range VFD The ATV212HD11N4LCD is a Schneider Electric Altivar 212 AC drive rated for 11 kW (15 hp) motor output at 480 V supply. It draws 16.8 A line current at 480 V and 21.1 A at 380 V, so the supply-side protection and cable sizing follow the higher figure when running on a 400 V-class network. This is the mid-functionality tier in the Altivar 212 family — not the basic economy variant, but not the full-featured top end either. It targets standard asynchronous motor control in HVAC pumping, fan, and conveyor applications where adjustable PI regulation and built-in protection cover the common fault modes without an external controller. ## Integrated C2 EMC filter — what it means for installation The drive ships with a Class C2 EMC filter integrated, compliant with IEC 61800-3 environments 2 category C2 and EN 61800-3 environments 1 category C1. In practice this means the drive meets conducted emission limits for industrial power networks (second environment) without an external filter, and in a first-environment (residential/commercial) installation it still meets the C1 limit — a wider installation envelope than a bare drive without the filter. The full standards list covers IEC 61800-5-1 (safety), EN 55011 Class A Group 1, and multiple C1/C2/C3 categories across both environments. If your site requires UL Type 1 enclosure compliance, that is also on the nameplate — the drive is rated for that installation type as shipped. ## Protection coverage and fieldbus interface Protection extends beyond the drive itself: it covers overheating, short-circuit between motor phases, overcurrent between output phases and earth, DC bus overvoltage/undervoltage, input phase loss, and motor thermal protection with PTC probe input. That means a single ATV212 can replace a drive-plus-external-relay combination in many panel designs — the PTC input is on the control terminal block, not an option card. The standard serial interface is 2-wire RS-485 with Modbus RTU protocol, configurable at 9600 or 19200 bps, 8-bit data, 1 stop bit, parity selectable. Addressing supports 1 to 247 nodes, so it integrates into a multi-drive Modbus network without an extra gateway. An optional LonWorks communication card is listed for building automation networks that require that protocol.","metaTitle":"Schneider ATV212HD11N4LCD AC Drive, 11 kW / 15 hp, 480 V","metaDescription":"Schneider Electric ATV212HD11N4LCD Altivar 212 AC drive, 11 kW / 15 hp at 480 V, 16.8 A line current, integrated C2 EMC filter, RS-485 Modbus.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"170 mm","Width":"180 mm","Height":"232 mm","Marking":"CE","Air flow":"147 m3/h","Standards":"IEC 61800-3 environments 2 category C2 EN 61800-3 environments 1 category C1 EN 55011 class A group 1 IEC 61800-3 environments 2 category C1 EN 61800-3 environments 2 category C3 EN 61800-3 category C2 EN 61800-3 environments 2 category C2 EN 61800-3 category C3 EN 61800-3 IEC 61800-3 environments 1 category C2 IEC 61800-3 IEC 61800-5-1 EN 61800-5-1 IEC 61800-3 environments 2 category C3 IEC 61800-3 category C2 EN 61800-3 environments 1 category C2 EN 61800-3 environments 2 category C1 IEC 61800-3 environments 1 category C3 IEC 61800-3 category C3 IEC 61800-3 environments 1 category C1 UL Type 1 EN 61800-3 environments 1 category C3","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"51 dB conforming to 86/188/EEC","Option card":"Communication card for LonWorks","Speed range":"1...10","Line current":"16.8 A at 480 V 21.1 A at 380 V","Functionality":"Mid","Apparent power":"17.1 kVA at 380 V","Assembly style":"With heat sink","Connector type":"1 open style 1 RJ45","Motor power hp":"15 hp","Motor power kW":"11 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection: drive Thermal power stage: drive Short-circuit between motor phases: drive Input phase breaks: drive Overcurrent between output phases and earth: drive Overvoltages on the DC bus: drive Break on the control circuit: drive Against exceeding limit speed: drive Line supply overvoltage and undervoltage: drive Line supply undervoltage: drive Against input phase loss: drive Thermal protection: motor Motor phase break: motor With PTC probes: motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"2 conforming to IEC 61800-5-1","Range of product":"Altivar 212","Shock resistance":"15 gn for 11 ms conforming to IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3","Transmission rate":"9600 bps or 19200 bps","Operating altitude":"1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 1000 m without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 12...16 kHz with derating factor","Frequency resolution":"Display unit: 0.1 Hz Analog input: 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"Centrifugal pumps and fans","Transient overtorque":"120 % of nominal motor torque +/- 10 % for 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to EN/IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication service":"Monitoring inhibitable Read holding registers (03) 2 words maximum Write multiple registers (16) 2 words maximum Time out setting from 0.1 to 100 s Read device identification (43) Write single register (06)","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","Power dissipation in W":"430 W","IP degree of protection":"IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1 IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529 IP21 conforming to EN/IEC 61800-5-1 IP21 conforming to EN/IEC 60529 IP41 on upper part conforming to EN/IEC 61800-5-1 IP41 on upper part conforming to EN/IEC 60529","Motor slip compensation":"Not available in voltage/frequency ratio motor control Automatic whatever the load Adjustable","Network number of phases":"3 phases","Continuous output current":"22.5 A at 380 V 22.5 A at 460 V","Maximum transient current":"24.8 A for 60 s","Product or component type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Communication port protocol":"METASYS N2 BACnet APOGEE FLN LonWorks Modbus","Nominal switching frequency":"12 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product specific application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio, 5 points","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01 to 3200 s Automatic based on the load","Ambient air temperature for storage":"-25...70 °C","Ambient air temperature for operation":"-10...40 °C (without derating) 40...50 °C (with derating factor)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/id/en/product/ATV212HD11N4LCD/kit-variable-speed-drive-atv212-11kw-380v-3ph-lcd/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV212HD11N4LCD/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for this drive?","answer":"The drive carries CE marking and complies with IEC 61800-5-1 (safety), EN 61800-3 (EMC) across multiple environment categories, EN 55011 Class A Group 1, and UL Type 1 enclosure rating. The integrated C2 EMC filter covers both industrial and first-environment installations without an external filter."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212HD11N4LCD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212HD11N4LCD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}