{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212HD22M3X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212HD22M3X","canonicalUrl":"https://aoctrl.com/schneider/ATV212HD22M3X","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212HD22M3X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 ATV212HD22M3X variable speed drive, 22 kW, 3-phase, 200-240 V input, 66.4 A line current at 240 V, without EMC filter.","salesMarkdown":"The Schneider Altivar 212 ATV212HD22M3X is a 22 kW variable speed drive for 3-phase induction motors on 200-240 V supplies. It draws 66.4 A line current at 240 V (80.4 A at 200 V) and delivers 33.5 kVA apparent power at 240 V. The drive is rated for a speed range of 1 to 10 and includes an adjustable PI regulator loop for process control. This unit ships without an integrated EMC filter, so plan for an external filter if the installation must meet IEC 61800-3 Category C1 or C2 conducted emissions limits. The drive itself is certified to IEC 61800-5-1 and carries CE marking, with compliance to multiple IEC 61800-3 environment categories depending on filter selection and installation. ## Integration notes Mount the drive vertically within ±10° of plumb. It requires forced air flow of 261 m³/h (68950.1 Gal/hr(US)) through the heatsink — ensure the enclosure's ventilation or fan system delivers that volume. The operating altitude is 1000 m without derating; above that, derate current 1% per 100 m up to 3000 m, with a 2000 m limit for corner-grounded distribution networks. The drive measures 16.5 in high × 9.4 in wide × 8.4 in deep (420 × 240 × 214 mm). It communicates via a 2-wire RS-485 physical interface using Modbus RTU at 9600 or 19200 bps, with 8-bit data and configurable parity. A LonWorks option card slot is available for building-automation networks.","metaTitle":"Schneider ATV212HD22M3X VFD, 22 kW, 3-phase","metaDescription":"Schneider Altivar 212 ATV212HD22M3X variable speed drive, 22 kW, 3-phase, 200-240 V input, 66.4 A line current at 240 V. Mature lifecycle, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["AC Drive (VFD) 240V"],"specifications":{"Depth":"8.4 in (214 mm)","Phase":"3 phase","Width":"9.4 in (240 mm)","Height":"16.5 in (420 mm)","Marking":"CE","Air flow":"68950.1 Gal/hr(US) (261 m3/h)","Category":"US1CP4D22156","Standards":"IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 1 category C1 IEC 61800-5-1 IEC 61800-3 environments 2 category C2 IEC 61800-5-1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C3 IEC 61800-3 IEC 61800-3 environments 1 category C3 IEC 61800-3 IEC 61800-3 environments 1 category C3 UL Type 1 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C1","EMC filter":"Without EMC filter","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"59.9 dB 86/188/EEC","Option card":"Communication card LonWorks","Speed range":"1...10","Line current":"66.4 A 240 V 80.4 A 200 V","Apparent power":"33.5 kVA 240 V","Assembly style":"With heat sink","Connector Type":"1 open style 1 RJ45","Motor power kW":"22 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"3 IEC 61800-5-1","Range of Product":"Altivar 212","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network Frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3","Transmission Rate":"9600 bps or 19200 bps","Motor starter type":"Variable speed drive","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 8...16 kHz with derating factor","Frequency resolution":"Display unit 0.1 Hz Analog input 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"HVAC","Transient overtorque":"120 % of nominal motor torque +/- 10 % 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication Service":"Write multiple registers (16) 2 words maximum Time out setting from 0.1 to 100 s Write single register (06) Monitoring inhibitable Read device identification (43) Read holding registers (03) 2 words maximum","Nbr. of units in pkg.":"1","Supply voltage limits":"170...264 V","Analogue output number":"1","Discrete output number":"2","Motor power range AC-3":"15...25 kW 200...240 V 3 phase","Power dissipation in W":"763 W","IP degree of protection":"IP21","Motor slip compensation":"Automatic whatever the load Adjustable Not available in voltage/frequency ratio motor control","Continuous output current":"88 A 230 V","Maximum transient current":"96.8 A 60 s","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"200...240 V - 15...10 %","Maximum Horse Power Rating":"30 hp","Communication Port Protocol":"APOGEE FLN Modbus LonWorks BACnet METASYS N2","Nominal switching frequency":"8 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product Specific Application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Voltage/frequency ratio - Energy Saving, quadratic U/f","Acceleration and deceleration ramps":"Automatic based on the load Linear adjustable separately from 0.01 to 3200 s","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Environment/IP degree of protection":"IP20 on upper part without blanking plate on cover IEC 61800-5-1 IP20 on upper part without blanking plate on cover IEC 60529 IP21 IEC 61800-5-1 IP21 IEC 60529 IP41 on upper part IEC 61800-5-1 IP41 on upper part IEC 60529","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)","Variable speed drive application selection":"Building - HVAC compressor for scroll Building - HVAC fan Building - HVAC pump"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,315.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3e0bab7667d85d49a2e7ea0bd369e735.pdf","sourceUrl":"https://www.se.com/vn/en/product/ATV212HD22M3X/variable-speed-drive-altivar-212-22kw-30hp-240v-3-phases-without-emc-ip21/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV212HD22M3X/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212HD22M3X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212HD22M3X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}