{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212HD30N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212HD30N4","canonicalUrl":"https://aoctrl.com/schneider/ATV212HD30N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212HD30N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 ATV212HD30N4 AC Drive (VFD) 480V, 30 kW, 44.7 A at 480 V, 3-phase, integrated Class C2 EMC filter, CE.","salesMarkdown":"## 30 kW VFD with integrated EMC filter The ATV212HD30N4 is a 30 kW variable speed drive from the Altivar 212 series, designed for three-phase 380-480 V supply with a line current of 44.7 A at 480 V and 56.7 A at 380 V. Apparent power is 44.6 kVA at 380 V. An integrated Class C2 EMC filter is standard, meeting IEC 61800-3 category C2 conducted emissions limits for industrial environments — no external filter needed for most installations. The drive includes an adjustable PI regulator for closed-loop process control, plus protections against short-circuit, overcurrent, overvoltage on the DC bus, input phase loss, motor overheating with PTC probes, and motor phase break. ## Panel fit and fieldbus integration Dimensions are 16.5 in (420 mm) high by 9.4 in (240 mm) wide by 8.4 in (214 mm) deep. Mounted vertically ±10°, with a required air flow of 290 m³/h through the heatsink for thermal management. Communication is via a 2-wire RS-485 physical interface using RTU protocol at 9600 or 19200 bps. An optional LonWorks communication card is available for building automation integration. Two analog inputs are provided: VIA switch-configurable for voltage (0-10 V DC) or current (0-20 mA), and VIB configurable for voltage or PTC probe input (up to 6 probes, 1500 Ohm). ## Mature lifecycle — sourced to order The drive is CE marked and complies with IEC 61800-3 (environments 1 and 2, categories C1 through C3), IEC 61800-5-1, and EN 55011 Class A Group 1. Pollution degree 3 per IEC 61800-5-1. Altitude rating is 1000 m without derating; above that to 3000 m derate 1% per 100 m, limited to 2000 m for corner-grounded distribution networks.","metaTitle":"Schneider Electric ATV212HD30N4 AC Drive (VFD) 480V, 30 kW","metaDescription":"Schneider Electric ATV212HD30N4 Altivar 212 VFD, 30 kW, 3-phase 380-480V, integrated Class C2 EMC filter, CE marked. Mature lifecycle, available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"8.4 in (214 mm)","Phase":"3 phase","Width":"9.4 in (240 mm)","title":"ATV212HD30N4","Height":"16.5 in (420 mm)","Marking":"CE","Air flow":"76611.3 Gal/hr(US) (290 m3/h)","Category":"US1CP4D22158","Standards":"IEC 61800-3 environments 2 category C1 IEC 61800-3 category C2 IEC 61800-5-1 IEC 61800-3 environments 1 category C1 IEC 61800-3 IEC 61800-3 environments 2 category C2 IEC 61800-5-1 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C3 EN 55011 class A group 1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-3 IEC 61800-3 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 1 category C1 EN 61800-3 category C3 IEC 61800-3 category C3 UL Type 1 IEC 61800-3 environments 2 category C3","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"59.9 dB 86/188/EEC","Option card":"Communication card LonWorks","Speed range":"1...10","description":"variable speed drive, Altivar 212, 30kW, 40hp, 480V, 3 phases, with EMC, IP21","Line current":"44.7 A 480 V 56.7 A 380 V","Functionality":"Mid","Apparent power":"44.6 kVA 380 V","Assembly style":"With heat sink","Connector Type":"1 open style 1 RJ45","Motor power kW":"30 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"3 IEC 61800-5-1","Range of Product":"Altivar 212","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network Frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3","Transmission Rate":"9600 bps or 19200 bps","Motor starter type":"Variable speed drive","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 8...16 kHz with derating factor","Frequency resolution":"Display unit 0.1 Hz Analog input 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"HVAC","Transient overtorque":"120 % of nominal motor torque +/- 10 % 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication Service":"Read device identification (43) Monitoring inhibitable Time out setting from 0.1 to 100 s Read holding registers (03) 2 words maximum Write single register (06) Write multiple registers (16) 2 words maximum","Nbr. of units in pkg.":"1","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","Motor power range AC-3":"30...50 kW 380...440 V 3 phase 30...50 kW 480...500 V 3 phase","Power dissipation in W":"847 W","IP degree of protection":"IP21","Motor slip compensation":"Not available in voltage/frequency ratio motor control Automatic whatever the load Adjustable","Continuous output current":"58.5 A 380 V 58.5 A 460 V","Maximum transient current":"64.4 A 60 s","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Maximum Horse Power Rating":"40 hp","Communication Port Protocol":"APOGEE FLN Modbus BACnet METASYS N2 LonWorks","Nominal switching frequency":"8 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product Specific Application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Flux vector control without sensor, standard Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 2 points","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01 to 3200 s Automatic based on the load","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Environment/IP degree of protection":"IP20 on upper part without blanking plate on cover IEC 61800-5-1 IP20 on upper part without blanking plate on cover IEC 60529 IP21 IEC 61800-5-1 IP21 IEC 60529 IP41 on upper part IEC 61800-5-1 IP41 on upper part IEC 60529","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)","Variable speed drive application selection":"Building - HVAC compressor for scroll Building - HVAC fan Building - HVAC pump"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,274.57 – $4,922.86","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV212HD30N4/variable-speed-drive-altivar-212-30kw-40hp-480v-3-phases-with-emc-ip21/"},"ai":{"faq":[{"question":"What are the key protection features of the ATV212HD30N4?","answer":"The drive includes overheating protection for the power stage, short-circuit protection between motor phases, overcurrent between output phases and earth, overvoltage and undervoltage on the DC bus, input phase loss detection, motor thermal protection, and PTC probe input for motor overtemperature."},{"question":"What compliance standards does the ATV212HD30N4 meet?","answer":"The drive is CE marked and complies with IEC 61800-3 (environments 1 and 2, categories C1 through C3), IEC 61800-5-1, and EN 55011 Class A Group 1. It includes an integrated Class C2 EMC filter."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212HD30N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212HD30N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}