{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212HU55N4LCD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212HU55N4LCD","canonicalUrl":"https://aoctrl.com/schneider/ATV212HU55N4LCD","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212HU55N4LCD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212, variable speed drive, 5.5 kW / 7.5 hp, 380...480 V 3-phase, IP20, with integrated Class C2 EMC filter, Modbus serial, ATV212HU55N4LCD.","salesMarkdown":"The Schneider ATV212HU55N4LCD is a 5.5 kW (7.5 hp) variable speed drive from the Altivar 212 series, designed for three-phase asynchronous motors on 380...480 V supplies. It draws 10.9 A at 380 V and 8.6 A at 480 V line current, with an apparent power rating of 9.1 kVA at 380 V. The integrated Class C2 EMC filter covers most industrial installations without an external filter — saves a DIN-rail slot and a wiring step. Communication is over a 2-wire RS 485 Modbus RTU link at 9600 or 19200 bps, addressing up to 247 nodes, which fits into a standard control network without a gateway. The drive includes an adjustable PI regulator for closed-loop process control (pressure, flow, level) without a separate controller. Protection covers motor and drive sides: thermal overload, short-circuit between motor phases, input phase loss, DC bus overvoltage/undervoltage, and PTC probe input for motor overtemperature. Footprint is 184 mm high by 142 mm wide by 150 mm deep, with a heat sink on the back. Mount vertical within ±10° for proper airflow — the fan moves 74 m³/h. Leave clearance above and below for convection; the heat sink dissipates drive losses without derating up to 1000 m altitude. Above that, derate 1 % per 100 m, and for corner-grounded distribution networks limit to 2000 m. The IP20 enclosure is panel-mount only, not for washdown or outdoor use without a separate cabinet.","metaTitle":"Schneider ATV212HU55N4LCD Altivar 212 VFD, 5.5 kW, 7.5 hp","metaDescription":"Schneider ATV212HU55N4LCD Altivar 212 variable speed drive for 5.5 kW / 7.5 hp asynchronous motors. 380-480 V, integrated C2 EMC filter, Modbus. Mature lifecycle, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"150 mm","Width":"142 mm","Height":"184 mm","Marking":"CE","Air flow":"74 m3/h","Standards":"IEC 61800-3 environments 2 category C2 EN 61800-3 environments 1 category C1 EN 61800-3 category C3 IEC 61800-3 environments 1 category C3 IEC 61800-3 category C3 IEC 61800-3 environments 1 category C2 UL Type 1 EN 61800-3 environments 2 category C1 IEC 61800-3 category C2 EN 61800-3 category C2 EN 61800-5-1 EN 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C1 EN 61800-3 environments 1 category C3 IEC 61800-3 IEC 61800-5-1 IEC 61800-3 environments 2 category C3 EN 61800-3 EN 61800-3 environments 2 category C3 EN 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C1 EN 55011 class A group 1","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"51 dB conforming to 86/188/EEC","Option card":"Communication card for LonWorks","Speed range":"1...10","Line current":"10.9 A at 380 V 8.6 A at 480 V","Functionality":"Mid","Apparent power":"9.1 kVA at 380 V","Assembly style":"With heat sink","Connector type":"1 RJ45 1 open style","Motor power hp":"7.5 hp","Motor power kW":"5.5 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection: drive Thermal power stage: drive Short-circuit between motor phases: drive Input phase breaks: drive Overcurrent between output phases and earth: drive Overvoltages on the DC bus: drive Break on the control circuit: drive Against exceeding limit speed: drive Line supply overvoltage and undervoltage: drive Line supply undervoltage: drive Against input phase loss: drive Thermal protection: motor Motor phase break: motor With PTC probes: motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"3 conforming to IEC 61800-5-1","Range of product":"Altivar 212","Shock resistance":"15 gn for 11 ms conforming to IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3","Transmission rate":"9600 bps or 19200 bps","Operating altitude":"1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 1000 m without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 12...16 kHz with derating factor","Frequency resolution":"Display unit: 0.1 Hz Analog input: 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"Centrifugal pumps and fans","Transient overtorque":"120 % of nominal motor torque +/- 10 % for 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to EN/IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication service":"Monitoring inhibitable Read device identification (43) Write multiple registers (16) 2 words maximum Read holding registers (03) 2 words maximum Time out setting from 0.1 to 100 s Write single register (06)","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","Power dissipation in W":"215 W","IP degree of protection":"IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1 IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529 IP21 conforming to EN/IEC 61800-5-1 IP21 conforming to EN/IEC 60529 IP41 on upper part conforming to EN/IEC 61800-5-1 IP41 on upper part conforming to EN/IEC 60529","Motor slip compensation":"Adjustable Automatic whatever the load Not available in voltage/frequency ratio motor control","Network number of phases":"3 phases","Continuous output current":"12 A at 380 V 12 A at 460 V","Maximum transient current":"13.2 A for 60 s","Product or component type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Communication port protocol":"BACnet METASYS N2 Modbus APOGEE FLN LonWorks","Nominal switching frequency":"12 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product specific application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 2 points","Acceleration and deceleration ramps":"Automatic based on the load Linear adjustable separately from 0.01 to 3200 s","Ambient air temperature for storage":"-25...70 °C","Ambient air temperature for operation":"-10...40 °C (without derating) 40...50 °C (with derating factor)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b2c0ab567390a06a98893fe27434106d.pdf","sourceUrl":"https://www.se.com/id/en/product/ATV212HU55N4LCD/kit-variable-speed-drive-atv212-55kw-380v-3ph-lcd/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV212HU55N4LCD/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for the ATV212HU55N4LCD?","answer":"It is rated for 5.5 kW (7.5 hp) motor output on 380...480 V three-phase supply, with line current of 10.9 A at 380 V and 8.6 A at 480 V. The integrated Class C2 EMC filter and Modbus RTU communication are standard."},{"question":"Where can I buy the ATV212HU55N4LCD and get a price?","answer":"This drive is sourced and quoted to order against an RFQ through independent distribution channels. Submit a request for quote (RFQ) to confirm current availability and pricing at the time of your order."},{"question":"What compliance documentation is available for the ATV212HU55N4LCD?","answer":"The drive carries CE marking and complies with IEC 61800-3 (EMC environments 1 and 2, categories C1, C2, C3), EN 61800-5-1 (safety), and EN 55011 Class A Group 1. The integrated EMC filter meets Class C2. Documentation includes the standards listed on the nameplate and in the technical manual."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212HU55N4LCD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212HU55N4LCD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}