{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212WD18N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212WD18N4","canonicalUrl":"https://aoctrl.com/schneider/ATV212WD18N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212WD18N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 ATV212WD18N4 AC drive, 18.5 kW, 3-phase 480 V, 27.8 A line current, integrated Class C2 EMC filter, CE marked, 315 mm depth.","salesMarkdown":"## 18.5 kW at 480 V — motor power and line current The ATV212WD18N4 is a 3-phase AC drive rated for 18.5 kW motor power at 480 V, drawing 27.8 A line current at that voltage (34.9 A at 380 V). This places it squarely in the mid-power segment of the Altivar 212 family, sized for standard asynchronous motors in pump, fan, and compressor duty. ## Integrated C2 EMC filter — compliance without external add-ons A Class C2 EMC filter is built in, covering conducted emissions for industrial environments per IEC 61800-3. This eliminates the need for a separate external filter in most installations, simplifying panel layout and reducing component count. The drive also carries CE marking and complies with EN 55011 Class A Group 1 and multiple IEC 61800-3 environment categories (C1, C2, C3). ## Protection coverage and control features The drive includes thermal protection for both the power stage and the motor, short-circuit protection between motor phases, overcurrent between output phases and earth, overvoltage/undervoltage on the DC bus, input phase loss detection, and motor phase break monitoring. An adjustable PI regulator is built in for closed-loop process control without an external controller.","metaTitle":"Schneider Electric ATV212WD18N4 AC Drive, 18.5 kW, 480 V","metaDescription":"Schneider Electric ATV212WD18N4 Altivar 212 AC drive, 18.5 kW, 3-phase 480 V, 27.8 A line current, integrated C2 EMC filter, CE marked. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"12.4 in (315 mm)","Phase":"3 phase","Width":"12.2 in (310 mm)","title":"ATV212WD18N4","Height":"26.2 in (665 mm)","Marking":"CE","Category":"US1CP4D22157","Standards":"EN 55011 class A group 1 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-5-1 IEC 61800-3 EN 61800-3 category C3 IEC 61800-5-1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C2 IEC 61800-3 category C3 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 category C2 IEC 61800-3 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-3","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"60.2 dB 86/188/EEC","Option card":"Communication card LonWorks","Speed range":"1...10","description":"variable speed drive, Altivar 212, 18.5kW, 25hp, 480V, 3 phases, with EMC class C2, IP55","Line current":"27.8 A 480 V 34.9 A 380 V","Functionality":"Mid","Apparent power":"28.2 kVA 380 V","Assembly style":"With heat sink","Connector Type":"1 RJ45 1 open style","Motor power kW":"18.5 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"2 IEC 61800-5-1","Range of Product":"Altivar 212","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network Frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3","Transmission Rate":"9600 bps or 19200 bps","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 8...16 kHz with derating factor","Frequency resolution":"Display unit 0.1 Hz Analog input 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"HVAC","Transient overtorque":"120 % of nominal motor torque +/- 10 % 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication Service":"Read device identification (43) Time out setting from 0.1 to 100 s Monitoring inhibitable Write single register (06) Read holding registers (03) 2 words maximum Write multiple registers (16) 2 words maximum","Nbr. of units in pkg.":"1","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","IP degree of protection":"IP55","Motor slip compensation":"Adjustable Automatic whatever the load Not available in voltage/frequency ratio motor control","Continuous output current":"37 A 380 V 37 A 460 V","Maximum transient current":"40.7 A 60 s","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Maximum Horse Power Rating":"25 hp","Communication Port Protocol":"METASYS N2 LonWorks BACnet APOGEE FLN Modbus","Nominal switching frequency":"8 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product Specific Application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 5 points Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01 to 3200 s Automatic based on the load","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Environment/IP degree of protection":"IP55 IEC 61800-5-1 IP55 IEC 60529","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,844.04 – $4,258.28","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV212WD18N4/variable-speed-drive-altivar-212-18-5kw-25hp-480v-3-phases-with-emc-class-c2-ip55/"},"ai":{"faq":[{"question":"What is the ATV212WD18N4's depth?","answer":"The depth is 12.4 in (315 mm). Width is 12.2 in (310 mm) and height is 26.2 in (665 mm)."},{"question":"What compliance documentation does Schneider Electric provide for the ATV212WD18N4?","answer":"The drive is CE marked and complies with EN 55011 Class A Group 1, IEC 61800-3 (environments 1 and 2, categories C1, C2, C3), and IEC 61800-5-1. An integrated Class C2 EMC filter is included."},{"question":"How can I order the ATV212WD18N4 or request a quote?","answer":"The ATV212WD18N4 is quoted to order against the BOM quantity through independent distribution. Availability and current pricing are confirmed at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212WD18N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212WD18N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}