{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212WD30N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212WD30N4","canonicalUrl":"https://aoctrl.com/schneider/ATV212WD30N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212WD30N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 ATV212WD30N4 AC drive, 30 kW, 3-phase 480 V, integrated Class C2 EMC filter, IP20, 720 x 284 x 315 mm.","salesMarkdown":"## Drive rating and motor match The ATV212WD30N4 is a 30 kW Altivar 212 drive, drawing 44.7 A line current at 480 V and 56.7 A at 380 V — the 480 V figure governs the upstream breaker and cable sizing for a 480 V installation. It is designed for asynchronous motors and includes an integrated Class C2 EMC filter, which meets the conducted emission limits for industrial environments under IEC 61800-3 category C2 without an external filter. ## Panel fit and mounting constraints The drive measures 28.3 in (720 mm) high by 11.2 in (284 mm) wide by 12.4 in (315 mm) deep — the height is the dimension that typically drives enclosure depth clearance when mounted vertically within ±10°. For corner-grounded distribution networks, the altitude is further limited to 2000 m. ## Protection and communication The drive includes a full suite of built-in protections: overcurrent, short-circuit between motor phases, input phase loss, DC bus overvoltage/undervoltage, motor thermal protection, and PTC probe input for direct motor winding temperature monitoring. Serial communication is via 2-wire RS-485 with Modbus RTU protocol at 9600 or 19200 bps, supporting up to 247 addresses on the bus. The two analog inputs are switch-configurable for voltage (0-10 V DC) or current (0-20 mA), with one input also configurable for PTC probes.","metaTitle":"Schneider Electric ATV212WD30N4 AC Drive (VFD) 480V, 30 kW","metaDescription":"Schneider Electric ATV212WD30N4 Altivar 212 AC drive, 30 kW, 3-phase 480V input, integrated Class C2 EMC filter. Mature lifecycle, quoted to order. Request RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"12.4 in (315 mm)","Phase":"3 phase","Width":"11.2 in (284 mm)","title":"ATV212WD30N4","Height":"28.3 in (720 mm)","Marking":"CE","Category":"US1CP4D22158","Standards":"IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-5-1 IEC 61800-3 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C3 EN 55011 class A group 1 IEC 61800-3 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-5-1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C1 EN 61800-3 category C3 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-3 IEC 61800-3 IEC 61800-3 category C3","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"59.9 dB 86/188/EEC","Option card":"Communication card LonWorks","Speed range":"1...10","description":"variable speed drive, Altivar 212, 30kW, 40hp, 480V, 3 phases, with EMC class C2, IP55","Line current":"44.7 A 480 V 56.7 A 380 V","Functionality":"Mid","Apparent power":"44.6 kVA 380 V","Assembly style":"With heat sink","Connector Type":"1 RJ45 1 open style","Motor power kW":"30 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"3 IEC 61800-5-1","Range of Product":"Altivar 212","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network Frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3","Transmission Rate":"9600 bps or 19200 bps","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 8...16 kHz with derating factor","Frequency resolution":"Display unit 0.1 Hz Analog input 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"HVAC","Transient overtorque":"120 % of nominal motor torque +/- 10 % 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication Service":"Read holding registers (03) 2 words maximum Time out setting from 0.1 to 100 s Read device identification (43) Write multiple registers (16) 2 words maximum Monitoring inhibitable Write single register (06)","Nbr. of units in pkg.":"1","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","IP degree of protection":"IP55","Motor slip compensation":"Not available in voltage/frequency ratio motor control Adjustable Automatic whatever the load","Continuous output current":"58.5 A 380 V 58.5 A 460 V","Maximum transient current":"64.4 A 60 s","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Maximum Horse Power Rating":"40 hp","Communication Port Protocol":"BACnet METASYS N2 APOGEE FLN LonWorks Modbus","Nominal switching frequency":"8 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product Specific Application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Flux vector control without sensor, standard Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01 to 3200 s Automatic based on the load","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Environment/IP degree of protection":"IP55 IEC 61800-5-1 IP55 IEC 60529","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,840.00 – $6,570.72","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ae/en/product/ATV212WD30N4/variable-speed-drive-altivar-212-30kw-40hp-480v-3-phases-with-emc-class-c2-ip55/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for ATV212WD30N4?","answer":"The drive carries CE marking and complies with IEC 61800-3 (environments 1 and 2, categories C1, C2, C3), IEC 61800-5-1, and EN 55011 Class A Group 1. An integrated Class C2 EMC filter is included. The pollution degree is 3 per IEC 61800-5-1."},{"question":"What is the ATV212WD30N4's depth for enclosure planning?","answer":"The listed depth is 12.4 in (315 mm), with a height of 28.3 in (720 mm) and width of 11.2 in (284 mm). Mounting must be vertical within ±10°."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212WD30N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212WD30N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}