{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212WD37N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212WD37N4","canonicalUrl":"https://aoctrl.com/schneider/ATV212WD37N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212WD37N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 ATV212WD37N4 AC drive, 37 kW, 3-phase 380…480 V, IP20, integrated class C2 EMC filter, 52 kVA.","salesMarkdown":"## 37 kW VFD with integrated C2 EMC filter The ATV212WD37N4 is a 37 kW Altivar 212 AC drive from Schneider Electric, designed for variable-speed control of asynchronous motors on 3-phase 380…480 V line supplies. Its 52 kVA apparent power at 380 V and 68.9 A line current at 380 V (54.4 A at 480 V) tell you this drive is sized for a 37 kW motor load — the headroom above the motor FLA matters when the driven load cycles hard or the line sags. ## Panel fit and mounting constraints This drive measures 34.6 in (880 mm) high by 11.2 in (284 mm) wide by 13.5 in (343 mm) deep — a tall, narrow footprint that suits a floor-standing enclosure rather than a shallow wall-mount cabinet. It mounts vertically within ±10° and needs clearance around the heat sink for natural convection; derate output current 1% per 100 m above 1000 m altitude, with a hard limit at 2000 m for corner-grounded distribution networks. ## Protection coverage and process control The drive packs a full set of protection functions: overcurrent, short-circuit between motor phases, earth fault, DC bus overvoltage, input phase loss, motor thermal protection, and PTC probe input. On the control side, an adjustable PI regulator handles closed-loop process control (pressure, flow, level) without an external controller. The analogue input accepts 0…10 V DC or 0…20 mA via switch-configurable VIA, and a separate VIB input can be configured for voltage or PTC probe. ## Communication and serial interface Standard Modbus serial communication over a 2-wire RS 485 physical interface, RTU frame, at 9600 or 19200 bps. The drive supports up to 247 addresses on the bus. An optional LonWorks communication card can be added for building-automation networks.","metaTitle":"Schneider ATV212WD37N4 AC Drive, 37 kW, 480 V, 3-phase","metaDescription":"Schneider Electric ATV212WD37N4 Altivar 212 AC drive, 37 kW, 3-phase 480 V input. CE marked, EMC filter C2 integrated. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"13.5 in (343 mm)","Phase":"3 phase","Width":"11.2 in (284 mm)","title":"ATV212WD37N4","Height":"34.6 in (880 mm)","Marking":"CE","Category":"US1CP4D22158","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C1 IEC 61800-3 IEC 61800-3 environments 1 category C2 EN 55011 class A group 1 IEC 61800-3 environments 1 category C1 IEC 61800-3 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 category C3 IEC 61800-3 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C3 EN 61800-3 category C3 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C1 IEC 61800-5-1 IEC 61800-3 environments 1 category C1","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"64 dB 86/188/EEC","Option card":"Communication card LonWorks","Speed range":"1...10","description":"variable speed drive, Altivar 212, 37kW, 50hp, 480V, 3 phases, with EMC class C2, IP55","Line current":"68.9 A 380 V 54.4 A 480 V","Functionality":"Mid","Apparent power":"52 kVA 380 V","Assembly style":"With heat sink","Connector Type":"1 open style 1 RJ45","Motor power kW":"37 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"3 IEC 61800-5-1","Range of Product":"Altivar 212","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network Frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3","Transmission Rate":"9600 bps or 19200 bps","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 8...16 kHz with derating factor","Frequency resolution":"Display unit 0.1 Hz Analog input 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"HVAC","Transient overtorque":"120 % of nominal motor torque +/- 10 % 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication Service":"Read holding registers (03) 2 words maximum Monitoring inhibitable Write single register (06) Write multiple registers (16) 2 words maximum Read device identification (43) Time out setting from 0.1 to 100 s","Nbr. of units in pkg.":"1","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","IP degree of protection":"IP55","Motor slip compensation":"Not available in voltage/frequency ratio motor control Adjustable Automatic whatever the load","Continuous output current":"79 A 380 V 79 A 460 V","Maximum transient current":"86.9 A 60 s","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Maximum Horse Power Rating":"50 hp","Communication Port Protocol":"LonWorks Modbus APOGEE FLN METASYS N2 BACnet","Nominal switching frequency":"8 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product Specific Application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01 to 3200 s Automatic based on the load","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Environment/IP degree of protection":"IP55 IEC 61800-5-1 IP55 IEC 60529","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,997.20 – $6,981.73","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV212WD37N4/variable-speed-drive-altivar-212-37kw-50hp-480v-3-phases-with-emc-class-c2-ip55/"},"ai":{"faq":[{"question":"What compliance documentation does ATV212WD37N4 carry?","answer":"CE marked, with an integrated class C2 EMC filter. It complies with IEC 61800-3 (multiple environment categories C1, C2, C3) and EN 55011 class A group 1. Pollution degree 3 per IEC 61800-5-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212WD37N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212WD37N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}