{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV212WD45N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV212WD45N4","canonicalUrl":"https://aoctrl.com/schneider/ATV212WD45N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV212WD45N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 212 AC drive, ATV212WD45N4, 45 kW, 3-phase 480 V, with integrated class C2 EMC filter, CE marked.","salesMarkdown":"## 45 kW, 3-phase 480 V — what that means for your motor load The ATV212WD45N4 is a 45 kW Altivar 212 drive built for asynchronous motors on 3-phase 480 V supplies. Line current pulls 83.8 A at 380 V and 65.9 A at 480 V — the lower draw at 480 V means less heat in the input wiring and a smaller upstream breaker if your plant runs at the higher voltage. ## Integrated class C2 EMC filter — no external box needed This drive ships with a built-in class C2 EMC filter per IEC 61800-3, so you skip the add-on filter bracket and the extra wiring. The filter covers conducted emissions for most industrial environments; if your installation is in a residential or light-industrial zone (environment 1), the drive also lists compliance down to category C1, meaning it can meet tighter limits without an external filter in many layouts. ## Protection set — what the drive watches for The ATV212WD45N4 monitors for overheating, short-circuit between motor phases, output-to-earth faults, DC bus overvoltage, input phase loss, and motor phase break. It also accepts PTC probes for direct motor thermal protection — a solid fit for pump and fan loads where the motor sits remote from the drive. ## Mature lifecycle — sourcing reality Schneider lists the ATV212WD45N4 lifecycle stage as mature. That means it is not in active new-product introduction, but it remains in the catalog with no announced end-of-life. We source it through authorized distribution channels and quote against your BOM quantity — availability and current pricing confirmed at RFQ time.","metaTitle":"Schneider Electric ATV212WD45N4 AC Drive (VFD) 480V, 45 kW","metaDescription":"Schneider Electric ATV212WD45N4 Altivar 212 AC drive, 45 kW, 3-phase 480 V, with integrated class C2 EMC filter. Mature lifecycle, quoted to order. CE marked.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"13.5 in (343 mm)","Phase":"3 phase","Width":"11.2 in (284 mm)","title":"ATV212WD45N4","Height":"34.6 in (880 mm)","Marking":"CE","Category":"US1CP4D22158","Standards":"IEC 61800-3 category C3 IEC 61800-3 environments 1 category C3 IEC 61800-5-1 IEC 61800-3 environments 2 category C2 IEC 61800-3 IEC 61800-3 environments 2 category C1 IEC 61800-3 category C2 EN 55011 class A group 1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 2 category C1 EN 61800-3 category C3 IEC 61800-3 category C2 IEC 61800-3 IEC 61800-3 environments 2 category C3 IEC 61800-5-1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C3","EMC filter":"Class C2 EMC filter integrated","Data format":"8 bits, 1 stop, odd even or no configurable parity","Noise level":"64 dB 86/188/EEC","Option card":"Communication card LonWorks","Speed range":"1...10","description":"variable speed drive, Altivar 212, 45kW, 60hp, 480V, 3 phases, with EMC class C2, IP55","Line current":"83.8 A 380 V 65.9 A 480 V","Functionality":"Mid","Apparent power":"61.9 kVA 380 V","Assembly style":"With heat sink","Connector Type":"1 RJ45 1 open style","Motor power kW":"45 kW","Output voltage":"= 1 mOhm 500 V DC for 1 minute","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Protection type":"Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor","Regulation loop":"Adjustable PI regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"mature","Local signalling":"1 LED (red) for DC bus energized","Pollution degree":"3 IEC 61800-5-1","Range of Product":"Altivar 212","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV212","Network Frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3","Transmission Rate":"9600 bps or 19200 bps","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485","Transmission frame":"RTU","Analogue input type":"VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits","Number of addresses":"1...247","Product destination":"Asynchronous motors","Switching frequency":"6...16 kHz adjustable 8...16 kHz with derating factor","Frequency resolution":"Display unit 0.1 Hz Analog input 0.024/50 Hz","Prospective line Isc":"22 kA","Specific application":"HVAC","Transient overtorque":"120 % of nominal motor torque +/- 10 % 60 s","Type of polarization":"No impedance","Vibration resistance":"1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8","Analogue input number":"2","Braking to standstill":"By DC injection","Communication Service":"Read holding registers (03) 2 words maximum Read device identification (43) Time out setting from 0.1 to 100 s Write multiple registers (16) 2 words maximum Monitoring inhibitable Write single register (06)","Nbr. of units in pkg.":"1","Supply voltage limits":"323...528 V","Analogue output number":"1","Discrete output number":"2","IP degree of protection":"IP55","Motor slip compensation":"Automatic whatever the load Not available in voltage/frequency ratio motor control Adjustable","Continuous output current":"94 A 380 V 94 A 460 V","Maximum transient current":"103.4 A 60 s","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V - 15...10 %","Maximum Horse Power Rating":"60 hp","Communication Port Protocol":"BACnet APOGEE FLN Modbus LonWorks METASYS N2","Nominal switching frequency":"8 kHz","Environmental characteristic":"Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3","Product Specific Application":"Pumps and fans in HVAC","Speed drive output frequency":"0.5...200 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Asynchronous motor control profile":"Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)","Acceleration and deceleration ramps":"Automatic based on the load Linear adjustable separately from 0.01 to 3200 s","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Environment/IP degree of protection":"IP55 IEC 61800-5-1 IP55 IEC 60529","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,459.48 – $7,365.70","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ae/en/product/ATV212WD45N4/variable-speed-drive-altivar-212-45kw-60hp-480v-3-phases-with-emc-class-c2-ip55/"},"ai":{"faq":[{"question":"Who supplies ATV212WD45N4 and how is it quoted for volume purchases?","answer":"We supply the ATV212WD45N4 through authorized Schneider Electric distribution. Volume pricing and lead time are confirmed at quote time against your specific BOM quantity — submit an RFQ for a firm quote."},{"question":"What compliance documentation does Schneider Electric provide for ATV212WD45N4?","answer":"The drive carries CE marking and complies with IEC 61800-3 (categories C1, C2, C3 for environments 1 and 2), IEC 61800-5-1, and EN 55011 class A group 1. The integrated EMC filter is class C2. Full declarations and manuals are available from Schneider's documentation portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV212WD45N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV212WD45N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}