{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV32HU40N4158","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV32HU40N4158","canonicalUrl":"https://aoctrl.com/schneider/ATV32HU40N4158","factsUrl":"https://aoctrl.com/api/mcp/products/ATV32HU40N4158","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 32, ATV32HU40N4158, variable speed drive, 4 kW / 5 hp at 380-480 V, integrated Class C2 EMC filter, 245 x 60 x 325 mm.","salesMarkdown":"The Schneider Electric ATV32HU40N4158 is an Altivar 32 variable speed drive rated for 4 kW / 5 hp at 380-480 V three-phase. It carries an integrated Class C2 EMC filter, which covers both environment 1 and environment 2 per EN 61800-3, so it meets the conducted emission limits for most industrial and light commercial installations without an external filter. Output frequency range is 0.0005 to 0.599 kHz. The drive includes an adjustable PID regulator for closing a loop on pressure, flow, or level without an external controller. Braking torque reaches up to 170 % with an external braking resistor, which matters for overhauling loads or fast deceleration profiles. The drive protects against input phase loss, output phase-to-earth faults, overcurrent, and motor overheating — all built in, no add-on modules needed. Communication is via the front RJ45 for Modbus and CANopen; optional plug-in cards add DeviceNet, EtherNet/IP, or Profibus DP V1. The 10.5 V DC reference supply (1 to 10 kOhm pot, <10 mA) is short-circuit protected, so wiring a speed pot is straightforward. The drive measures 245 mm deep by 60 mm wide by 325 mm tall, with a heat-sink assembly. Control wiring torque is 0.5 N·m; power and motor terminals take 0.6–0.7 N·m.","metaTitle":"Schneider ATV32HU40N4158 Altivar 32 Drive, 4 kW, 5 hp, 380-4","metaDescription":"Schneider Electric ATV32HU40N4158 Altivar 32 variable speed drive, 4 kW / 5 hp at 380-480 V, integrated Class C2 EMC filter, current lifecycle stage. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"245 mm","Width":"60 mm","Height":"325 mm","Supply":"Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection","Marking":"CE","Accuracy":"+/- 0.2 % (AI1, AI2, AI3) for a temperature of -10...60 °C +/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C +/- 1 % (AO1) for a temperature of 25 °C +/- 2 % (AO1) for a temperature of -10...60 °C","Standards":"EN 61800-3 environments 2 category C2 EN/IEC 61800-5-1 EN 61800-3 environments 1 category C2 EN 55011 class A group 1 EN/IEC 61800-3","EMC filter":"Class C2 EMC filter integrated","Insulation":"Electrical between power and control","Noise level":"45 dB conforming to 86/188/EEC","Option card":"Communication card for CANopen daisy chain Communication card for CANopen open style Communication card for DeviceNet Communication card for EtherNet/IP Communication card for Profibus DP V1","Speed range":"1...100 for asynchronous motor in open-loop mode","Line current":"10.5 A for 500 V 3 phases 4 kW / 5 hp 13.7 A for 380 V 3 phases 4 kW / 5 hp","Functionality":"Mid","Response time":"LI1...LI6 8 ms, tolerance +/- 0.7 ms for logic output(s) R1A, R1B, R1C 2 ms for relay output(s) R2A, R2C 2 ms for relay output(s)","Apparent power":"9.1 kVA at 500 V 3 phases 4 kW / 5 hp","Assembly style":"With heat sink","Braking torque":"<= 170 % with braking resistor","Component name":"ATV32","Connector type":"1 RJ45 (on front face) for Modbus/CANopen","Motor power hp":"5 hp at 380...480 V","Motor power kW":"4 kW at 380...480 V","Output voltage":"<= power supply voltage","Speed accuracy":"+/- 10 % of nominal slip 0.2 Tn to Tn","Linearity error":"+/- 0.2...0.5 % of maximum value (AI1, AI2, AI3) +/- 0.3 % (AO1)","Protection type":"Input phase breaks: drive Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive","Regulation loop":"Adjustable PID regulator","Torque accuracy":"+/- 15 %","lifecycle_stage":"current","Local signalling":"1 LED red for drive voltage 1 LED green for CANopen run 1 LED red for CANopen error 1 LED red for drive fault","Method of access":"Slave CANopen","Output frequency":"0.0005...0.599 kHz","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 32","Shock resistance":"15 gn for 11 ms conforming to EN/IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Network frequency":"47.5...63 Hz","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3","Sampling duration":"2 ms (AI1, AI2, AI3) - analog input(s) 2 ms (AO1) - analog input(s)","Tightening torque":"0.5 N.m, 4.4 lb/ft (control) 0.7 N.m, 7.1 lb/ft (motor/braking resistor) 0.6 N.m, 5.3 lb/ft (power supply)","Operating altitude":"1000...3000 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Physical interface":"2-wire RS 485 for Modbus","Transmission frame":"RTU for Modbus","Analogue input type":"AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits","Discrete input type":"Programmable (sink/source) (LI1...LI4)24...30 V DC, with level 1 PLC Programmable as pulse input 20 kpps (LI5)24...30 V DC, with level 1 PLC Switch-configurable PTC probe (LI6)24...30 V DC Safe torque off (STO)24...30 V DC - 1500 Ohm","Number of addresses":"1...127 for CANopen 1...247 for Modbus","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...16 kHz adjustable","Analogue output type":"AO1 software-configurable current 0...20 mA, impedance: 800 Ohm, resolution 10 bits AO1 software-configurable voltage 0...10 V, impedance: 470 Ohm, resolution 10 bits","Discrete input logic":"Negative logic (sink) (LI1...LI6), > 19 V (state 0), < 13 V (state 1) Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)","Discrete output type":"Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles Configurable relay logic: (R2A, R2B) NO - 100000 cycles Logic: (LO)","Prospective line Isc":"5 kA for 3 phases","Specific application":"Other applications","Transient overtorque":"170...200 %","Type of polarization":"No impedance for Modbus","Vibration resistance":"1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6","Analogue input number":"3","Braking to standstill":"By DC injection","Discrete input number":"7","Electrical connection":"Screw terminal, clamping capacity: 0.5...1.5 mm², AWG 18...AWG 14 (control) Removable screw terminals, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 12 (motor/braking resistor) Screw terminal, clamping capacity: 2.5...4 mm², AWG 12...AWG 10 (power supply)","Supply voltage limits":"323...550 V","Analogue output number":"1","Discrete output number":"3","Nominal output current":"9.5 A at 4 kHz 500 V 4 kW / 5 hp","IP degree of protection":"IP20 conforming to EN/IEC 61800-5-1","Motor slip compensation":"Not available in voltage/frequency ratio (2 or 5 points) Automatic whatever the load Adjustable 0...300 %","Network number of phases":"3 phases","Maximum switching current":"R1: 3 A at 250 V AC resistive load, cos phi = 1 R1: 4 A at 30 V DC resistive load, cos phi = 1 R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4 R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4 R2: 5 A at 250 V AC resistive load, cos phi = 1 R2: 5 A at 30 V DC resistive load, cos phi = 1","Maximum transient current":"14.3 A for 60 s 4 kW / 5 hp","Minimum switching current":"5 mA at 24 V DC for configurable relay logic","Product or component type":"Variable speed drive","[Us] rated supply voltage":"380...500 V - 15...10 %","Communication port protocol":"CANopen Modbus","Nominal switching frequency":"4 kHz","Product specific application":"Complex machines","Electromagnetic compatibility":"1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11","Synchronous motor control profile":"Vector control without sensor","Asynchronous motor control profile":"Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Flux vector control without sensor - Energy Saving, NoLoad law","Acceleration and deceleration ramps":"CUS Deceleration ramp adaptation S U Linear Ramp switching Deceleration ramp automatic stop DC injection","Ambient air temperature for storage":"-25...70 °C","Ambient air temperature for operation":"-10...50 °C without derating 50...60 °C with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/95ce416b6a5dd1d72a39a1490bd6ebd1.pdf","sourceUrl":"https://www.se.com/vn/en/product/ATV32HU40N4158/variable-speed-drive-atv32-400v-4-kw-variable-speed-drive-s158/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV32HU40N4158/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does this drive carry?","answer":"The drive is CE marked and complies with EN 61800-3 (environments 1 and 2, category C2), EN/IEC 61800-5-1, and EN 55011 Class A Group 1. The integrated C2 EMC filter covers conducted emissions for most industrial installations."},{"question":"What are the key ratings for the ATV32HU40N4158?","answer":"It is rated for 4 kW / 5 hp at 380-480 V three-phase, with an output frequency range of 0.0005 to 0.599 kHz. It includes an integrated Class C2 EMC filter, adjustable PID regulator, and supports braking torque up to 170 % with an external resistor."},{"question":"What communication options does this drive support?","answer":"The drive has a front RJ45 for Modbus and CANopen. Optional plug-in communication cards add CANopen daisy chain, DeviceNet, EtherNet/IP, or Profibus DP V1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV32HU40N4158","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV32HU40N4158 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}