{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV630C25N4F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV630C25N4F","canonicalUrl":"https://aoctrl.com/schneider/ATV630C25N4F","factsUrl":"https://aoctrl.com/api/mcp/products/ATV630C25N4F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV630, ATV630C25N4F, variable speed drive, 380-440 V, 250 kW normal duty / 200 kW heavy duty, 477 A continuous output, IP21 floor-standing, standard version.","salesMarkdown":"## 250 kW process drive with STO SIL 3 The ATV630C25N4F is a 250 kW normal-duty / 200 kW heavy-duty variable speed drive from Schneider Electric's Altivar Process ATV600 series, designed for asynchronous and synchronous motors in process and utility applications. Continuous output current is 477 A at 2.5 kHz switching for normal duty, 370 A at 2.5 kHz for heavy duty, from a 380-440 V supply. The built-in safe torque off (STO) function meets SIL 3 — essential for safety circuits where the drive must reliably block rotation during maintenance or fault conditions. ## Physical fit and cooling Floor-standing enclosure rated IP21 per IEC 61800-5-1 and IEC 60529, cooled by forced convection moving 1300 m³/h of air. Noise level is 70 dB — factor this into the equipment room layout if operators work nearby. Operating altitude range is 1000-4800 m with a 1% current derating per 100 m above 1000 m. Ambient temperature range is -15 to 40 °C without derating, 40-50 °C with derating applied. The drive must be mounted vertically ±10°. ## EMC and harmonic compliance for installation planning Integrated EMC filter compliant with IEC 61800-3 category C3 for 150 m cable runs — suitable for industrial environments where the drive is installed in a separate enclosure from the supply transformer. Total harmonic current distortion (THDI) is below 48% at full load per IEC 61000-3-12. Immunity meets electrostatic discharge level 3, radiated field level 3, fast transient level 4, surge level 3, and conducted RF level 3 per IEC 61000-4-2 through -6. ## Fieldbus and I/O configuration Slot A accepts communication modules for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (daisy chain RJ45, SUB-D 9, or screw terminals), Ethernet IP/Modbus TCP/MD-Link, BACnet MS/TP, or Ethernet Powerlink. The drive also carries Ethernet, Modbus serial, and Modbus TCP as native ports. Eight discrete inputs are standard, with DI7 and DI8 programmable as pulse inputs up to 30 kHz at 24 V DC. An adjustable PID regulator is built in for closed-loop process control without an external controller.","metaTitle":"Schneider ATV630C25N4F AC Drive 250 kW, 477 A, IP21","metaDescription":"Schneider Electric ATV630C25N4F Altivar Process drive, 250 kW normal duty, 477 A output, IP21 floor-standing. STO SIL 3, integrated EMC filter C3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"title":"ATV630C25N4F","Marking":"CE","Variant":"Standard version","Standards":"IEC 60204-1 IEC 61800-2 IEC 61800-3 IEC 61800-5-1","EMC filter":"Integrated with 150 m conforming to IEC 61800-3 category C3","Noise level":"70 dB","Option card":"Slot A: communication module, Profibus DP V1 Slot A: communication module, PROFINET Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45 Slot A: communication module, CANopen SUB-D 9 Slot A: communication module, CANopen screw terminals Slot A/slot B: digital and analog I/O extension module Slot A/slot B: output relay extension module Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link Communication module, BACnet MS/TP Communication module, Ethernet Powerlink","description":"variable speed drive ATV630 - 250kW - 380...440V - IP21","Line current":"391 A at 400 V (normal duty) 319 A at 400 V (heavy duty) 453 A at 380 V (normal duty) 369 A at 380 V (heavy duty)","Maximum THDI":"<48 % full load conforming to IEC 61000-3-12","Mounting mode":"Floor-standing","Motor power kW":"250 kW (normal duty) 200 kW (heavy duty)","Regulation loop":"Adjustable PID regulator","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2","Range of product":"Altivar Process ATV600","Shock resistance":"15 gn for 11 ms conforming to IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV630","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Discrete input type":"DI7, DI8 programmable as pulse input: 0...30 kHz, 24 V DC ( 1 MOhm 500 V DC for 1 minute to earth","Product destination":"Asynchronous motors Synchronous motors","Overvoltage category":"III","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Discrete input number":"8","Volume of cooling air":"1300 m3/h","Nominal Output Current":"477.0 A","IP degree of protection":"IP21 conforming to IEC 61800-5-1 IP21 conforming to IEC 60529","Continuous output current":"477 A at 2.5 kHz for normal duty 370 A at 2.5 kHz for heavy duty","Product or component type":"Variable speed drive","[Us] rated supply voltage":"380...440 V","Communication port protocol":"Ethernet Modbus serial Modbus TCP","Product specific application":"Process and utilities","Speed drive output frequency":"0.1...500 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-25...70 °C","Ambient air temperature for storage":"-40...70 °C","Ambient air temperature for operation":"-15...40 °C (without derating) 40...50 °C (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"40 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"6 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$27,546.48","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ae/en/product/ATV630C25N4F/variable-speed-drive-atv630-250kw-380-440v-ip21/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for the ATV630C25N4F?","answer":"The drive carries CE marking and complies with IEC 60204-1, IEC 61800-2, IEC 61800-3, and IEC 61800-5-1. The integrated EMC filter meets IEC 61800-3 category C3. No RoHS, REACH, or UL documentation is listed in the available spec record."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV630C25N4F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV630C25N4F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}