{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV650C11N4F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV650C11N4F","canonicalUrl":"https://aoctrl.com/schneider/ATV650C11N4F","factsUrl":"https://aoctrl.com/api/mcp/products/ATV650C11N4F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV650, variable speed drive, 110 kW normal duty / 90 kW heavy duty, 211 A continuous output, 380-440 V, with integrated disconnect switch, IP00, floor-standing.","salesMarkdown":"The ATV650C11N4F is an Altivar Process drive rated 110 kW normal duty and 90 kW heavy duty, with a continuous output current of 211 A at 2.5 kHz for normal duty and 173 A for heavy duty. Supply voltage is 380-440 V, 50/60 Hz, and the drive includes an integrated disconnect switch — that's a line-isolation device built into the chassis, so the panel builder can skip an external disconnect breaker on the incoming feed, saving a DIN rail slot and a wiring step. The switch is part of the variant, not an add-on kit. The drive carries STO (Safe Torque Off) rated SIL 3 per IEC 61800-5-2. That means the safety circuit can remove torque from the motor without a separate contactor — the drive's own power stage is disabled at the gate-drive level. For a process line where an operator needs to reach into the hazard zone during a jam, STO SIL 3 satisfies the functional safety loop without adding an external safety relay. ## Fieldbus, I/O, and expansion slots Slot A accepts communication modules for PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (three connector variants), Ethernet IP/Modbus TCP/MD-Link, BACnet MS/TP, Ethernet Powerlink, and Profibus DP V1. Slot A and slot B also accept digital/analog I/O extension modules and output relay extension modules. That means the drive can be dropped into an existing network architecture without a gateway — the slot card matches the fieldbus. Built-in Modbus serial and Ethernet Modbus TCP are standard on the base unit, so even without a slot card the drive talks to a PLC or SCADA over the most common industrial protocols. The eight discrete inputs include two (DI7, DI8) programmable as pulse inputs up to 30 kHz — useful for encoder or flowmeter feedback without an external pulse divider. The regulation loop includes an adjustable PID regulator, which means the drive can close a process loop (pressure, flow, level) directly without sending the process variable to a PLC and back. For a pump or fan application, that cuts the control cycle time and offloads the controller. Mounting is floor-standing — this is not a DIN-rail drive. The IP00 base rating means the power section is open to the environment; an IP20 top cover kit (VW3A9705) or an IP54 enclosure is available if the drive sits in a washdown area or a dust-prone panel. The forced-convection cooling moves 720 m³/h of air, so the enclosure must have intake and exhaust vents sized for that airflow — a sealed cabinet will overheat the drive in short order. Operating temperature is -15 to 40 °C without derating, and 50 to 60 °C with derating. Above 1000 m altitude, derate 1 % per 100 m. The drive is rated for 15 gn shock for 11 ms and vibration resistance of 1 gn at 13-200 Hz. That covers most industrial floor and skid-mounted installations without a vibration-isolation base.","metaTitle":"Schneider Electric ATV650C11N4F AC Drive, 110 kW, 211 A","metaDescription":"Schneider Electric ATV650C11N4F Altivar Process drive, 110 kW normal duty, 211 A output, 380-440 V, with disconnect switch. CE marked, STO SIL 3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV650C11N4F","Marking":"CE","Variant":"With disconnect switch","Standards":"IEC 60204-1 IEC 61800-2 IEC 61800-3 IEC 61800-5-1","EMC filter":"Integrated with 150 m conforming to IEC 61800-3 category C3","Noise level":"69 dB","Option card":"Slot A: communication module, PROFINET Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45 Slot A: communication module, CANopen SUB-D 9 Slot A: communication module, CANopen screw terminals Slot A/slot B: digital and analog I/O extension module Slot A/slot B: output relay extension module Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link Communication module, BACnet MS/TP Communication module, Ethernet Powerlink Slot A: communication module, Profibus DP V1","description":"variable speed drive ATV650 - 110kW - 380...440V - IP54 - disconnect switch","Line current":"179 A at 690 V (normal duty) 151 A at 500 V (heavy duty) 207 A at 690 V (heavy duty) 174 A at 400 V (normal duty)","Maximum THDI":"<48 % full load conforming to IEC 61000-3-12","Mounting mode":"Floor-standing","Motor power kW":"110 kW (normal duty) 90 kW (heavy duty)","Regulation loop":"Adjustable PID regulator","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"3","Range of product":"Altivar Process ATV600","Shock resistance":"15 gn for 11 ms conforming to IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV650","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3","Operating altitude":"1000...4800 m with current derating 1 % per 100 m <= 1000 m without derating","Operating position":"Vertical +/- 10 degree","Discrete input type":"DI7, DI8 programmable as pulse input: 0...30 kHz, 24 V DC ( 1 MOhm 500 V DC for 1 minute to earth","Product destination":"Asynchronous motors Synchronous motors","Overvoltage category":"III","Vibration resistance":"1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6 1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6","Discrete input number":"8","Volume of cooling air":"720 m3/h","Nominal Output Current":"211.0 A","IP degree of protection":"IP00 conforming to IEC 60529 IP20 (with kit VW3A9705) conforming to IEC 61800-5-1 IP20 (with kit VW3A9705) conforming to IEC 60529 IP54 conforming to IEC 61800-5-1","Continuous output current":"211 A at 2.5 kHz for normal duty 173 A at 2.5 kHz for heavy duty","Product or component type":"Variable speed drive","[Us] rated supply voltage":"380...440 V","Communication port protocol":"Modbus serial Ethernet Modbus TCP","Product specific application":"Process and utilities","Speed drive output frequency":"0.1...500 Hz","Electromagnetic compatibility":"Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2","Ambient air transport temperature":"-25...70 °C","Ambient air temperature for storage":"-40...70 °C","Ambient air temperature for operation":"50...60 °C (with derating factor) -15...40 °C (without derating)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"40 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"6 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ae/en/product/download-pdf/ATV650C11N4F?filename=Schneider+Electric_Altivar-Process-ATV600_ATV650C11N4F.pdf', 'path_name': '5ee442f757cbc3336bc96680b31f788b.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/5ee442f757cbc3336bc96680b31f788b.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ae/en/product/ATV650C11N4F/variable-speed-drive-atv650-110kw-380-440v-ip54-disconnect-switch/"},"ai":{"faq":[{"question":"What is the ATV650C11N4F's CE marking and compliance status?","answer":"The drive carries CE marking and complies with IEC 60204-1, IEC 61800-2, IEC 61800-3, and IEC 61800-5-1. The integrated EMC filter meets IEC 61800-3 category C3 for installations with a 150 m cable length."},{"question":"How do I get pricing and availability for the ATV650C11N4F?","answer":"Submit an RFQ for current pricing and lead time — availability is confirmed at quote time through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV650C11N4F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV650C11N4F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}