{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV650C25N4F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV650C25N4F","canonicalUrl":"https://aoctrl.com/schneider/ATV650C25N4F","factsUrl":"https://aoctrl.com/api/mcp/products/ATV650C25N4F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV650, ATV650C25N4F, variable speed drive, 250 kW normal duty / 200 kW heavy duty, 477 A continuous output, 380...440 V supply, IP54, floor-standing, with integrated disconnect switch.","salesMarkdown":"## Floor-standing process drive with integrated disconnect The ATV650C25N4F is a floor-standing variable speed drive from the Altivar Process ATV600 series, rated for 250 kW normal duty and 200 kW heavy duty on asynchronous or synchronous motors. It delivers a continuous output current of 477 A at 2.5 kHz for normal duty and 370 A at 2.5 kHz for heavy duty, with a nominal output current of 477 A. The integrated disconnect switch (variant) means this unit arrives with a built-in load-break switch on the line side — one less component to panel-mount and wire, and a clear isolation point for the drive during maintenance. The IP54 enclosure (conforming to IEC 60529 and IEC 61800-5-1) suits installations where the drive sits in the same room as the motor, not in a separate clean cabinet — think pump houses, water treatment, or conveyor galleries where airborne dust and splash are present. ## Output ratings and duty selection The heavy-duty rating (200 kW at 370 A continuous) is the figure to use for constant-torque loads like conveyors, extruders, or positive-displacement pumps. The normal-duty rating (250 kW at 477 A) applies to variable-torque loads such as centrifugal pumps and fans where the torque demand drops with speed. The line current draw at 400 V is 391 A in heavy duty and 369 A in normal duty; at 380 V it is 453 A heavy duty and 319 A normal duty — these numbers drive the upstream breaker and cable sizing. The output frequency range spans 0.1 to 500 Hz, covering both standard induction motors and high-speed spindle applications. The integrated EMC filter is rated for 150 m of motor cable in category C3 per IEC 61800-3, which is typical for industrial environments where the drive is not on a residential or public low-voltage supply. Total harmonic current distortion (THDI) stays below 48% at full load per IEC 61000-3-12. ## Safety, environment, and fieldbus flexibility Safe Torque Off (STO) is built in at SIL 3 per IEC 61800-5-2 — no separate safety relay needed for the stop function on a guarding circuit. The drive also carries an adjustable PID regulator for closed-loop process control (pressure, flow, level) without an external controller. Slot A accepts a range of communication modules: PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (daisy chain RJ45, SUB-D 9, or screw terminals), Ethernet IP/Modbus TCP/MD-Link, BACnet MS/TP, Ethernet Powerlink, and Profibus DP V1. Slots A and B also accept digital/analog I/O extension modules and output relay extension modules. The onboard Modbus TCP port is standard. Operating temperature is -15 to 40 °C without derating, and up to 50 °C with derating. Altitude derating starts at 1000 m — 1% current derating per 100 m above that. The forced-convection cooling moves 1300 m³/h of air, so the installation space must allow free intake and exhaust; the vertical operating position (±10°) is mandatory for proper airflow through the heatsink.","metaTitle":"Schneider Electric ATV650C25N4F AC Drive, 250 kW, 477 A","metaDescription":"Schneider Electric ATV650C25N4F Altivar Process drive, 250 kW normal duty, 477 A output, IP54, with disconnect switch. CE marked, STO SIL 3. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Frequency":"50...60 Hz - 5...5 %","IP Rating":"IP54","Product Status":"Active","Pollution Degree":"3","Temp Storage Max":"70 °C","Temp Storage Min":"-40 °C","Operating Position":"Vertical +/- 10 degree","Temp Operating Max":"70 °C","Temp Operating Min":"-25 °C","Temperature Storage":"-40...70 °C","Main Product Or Component Type":"Variable speed drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/ATV650C25N4F/variable-speed-drive-altivar-process-atv600-atv650-250kw-400-to-480v-floor-standing/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV650C25N4F/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV650C25N4F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV650C25N4F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}