{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV650D75N4E","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV650D75N4E","canonicalUrl":"https://aoctrl.com/schneider/ATV650D75N4E","factsUrl":"https://aoctrl.com/api/mcp/products/ATV650D75N4E","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV650D75N4E variable speed drive, 75 kW heavy duty / 100 hp normal duty, 380-480 V, 145 A nominal output, IP55, with integrated disconnect switch.","salesMarkdown":"## Active production — what that means for your BOM line The ATV650D75N4E: This drive carries CE marking and complies with IEC 61800-3, IEC 61800-5-1, IEC 61508, and IEC 13849-1 — covering both EMC and functional safety for European installations. ## Motor power and duty ratings — sizing the drive to the load Rated 75 kW heavy duty and 100 hp normal duty, this drive handles asynchronous and synchronous motors. The heavy-duty rating is the one to use for constant-torque loads like conveyors or extruders; the normal-duty figure applies for variable-torque centrifugal pumps and fans. Continuous output current is 106 A at 2.5 kHz for heavy duty and 145 A at 2.5 kHz for normal duty. The nominal output current is 145.0 A. Line current varies by supply voltage and duty: 112.7 A at 480 V normal duty, 98.9 A at 380 V heavy duty. ## Built-in disconnect switch and IP55 — panel integration notes The variant with disconnect switch means the drive includes an integrated load-break switch on the input, simplifying panel wiring and meeting local isolation requirements without a separate external disconnect. IP55 protection (conforming to IEC 60529 and IEC 61800-5-1) allows wall-mount installation in washdown areas or dusty environments — no need for a separate enclosure in most process plant locations. Mounting position is vertical ±10 degrees. Ambient temperature range is -15 to 40 °C without derating, and up to 50 °C with derating. Above 1000 m altitude, derate current 1 % per 100 m up to 4800 m. Forced convection cooling; noise level is 69.9 dB. ## Safety function and communication slots Integrated STO (Safe Torque Off) rated SIL 3 per IEC 61508 — this is the safety function that removes torque from the motor without a separate contactor. It's the primary safety interface for hazard zones on a process line. Slot A accepts communication modules for PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (daisy chain RJ45, SUB-D 9, or screw terminals), Profibus DP V1, Ethernet Powerlink, and BACnet MS/TP. Slot A and slot B also accept digital/analog I/O extension and output relay extension modules. The drive ships with Ethernet, Modbus serial, and Modbus TCP as standard communication ports. ## EMC filter and harmonic performance Integrated EMC filter rated for 150 m cable length in category C3 environment (IEC 61800-3 environment 2, category C3). This means the drive is suitable for industrial power networks where the supply impedance is low — typical for factory floor installations. Maximum THDI is <48 % from 80-100 % load per IEC 61000-3-12.","metaTitle":"Schneider Electric ATV650D75N4E Altivar Process drive","metaDescription":"Schneider Electric ATV650D75N4E variable speed drive, 75 kW heavy duty / 100 hp normal duty, 380-480 V, IP55, with disconnect switch.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Current":"112.7 A at 480 V (normal duty) 98.9 A at 380 V (heavy duty) 86.9 A at 480 V (heavy duty) 131.3 A at 380 V (normal duty)","Frequency":"50...60 Hz - 5...5 %","IP Rating":"IP55","Horsepower":"75 hp heavy duty 100 hp normal duty","Product Status":"Active","Pollution Degree":"3","Temp Storage Max":"70 °C","Temp Storage Min":"-40 °C","Operating Position":"Vertical +/- 10 degree","Temp Operating Max":"70 °C","Temp Operating Min":"-40 °C","Temperature Storage":"-40...70 °C","Main Product Or Component Type":"Variable speed drive","Ambient Air Temperature Operation":"40...50 °C (with derating factor) -15...40 °C (without derating)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/ATV650D75N4E/variable-speed-drive-altivar-process-atv600-atv650-75kw-400-to-480v-ip55-disconnect-switch/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV650D75N4E/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV650D75N4E","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV650D75N4E when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}