{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV6A0C13S6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV6A0C13S6","canonicalUrl":"https://aoctrl.com/schneider/ATV6A0C13S6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV6A0C13S6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV600, ATV6A0C13S6, modular drive, 150 hp at 600 V normal duty, 131 A line current, integrated EMC filter C3.","salesMarkdown":"## At a glance The Schneider ATV6A0C13S6 is a modular Altivar Process ATV600 drive rated for 150 hp at 600 V normal duty with a line current of 131 A (112 A heavy duty). It handles both asynchronous and synchronous motors and comes with an integrated EMC filter meeting IEC 61800-3 category C3 for cable runs up to 300 m — no external filter needed for most CE-marked industrial installations. Safety is built in: Safe Torque Off (STO) rated SIL 3 eliminates the need for a separate safety relay when stopping torque is the risk. The protection suite covers motor and drive thermal, phase loss, overcurrent, overvoltage, undervoltage, and DC bus faults — most of what a VFD fault log will throw at you. ## Safety and compliance The drive carries CE marking and complies with a broad set of IEC and UL standards: IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic limits), IEC 60721-3 (environmental), IEC 61508 / IEC 13849-1 (functional safety), and UL 61800-5-1. Pollution degree 2 per IEC 61800-5-1, designed for typical industrial control panels. Total harmonic current distortion (THDi) is guaranteed below 48 % at full load per IEC 61000-3-12, which keeps line harmonics within limits without an external line reactor in many installations. ## On the network Slot A accepts a choice of communication modules: Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, or CANopen (RJ45, SUB-D 9, or screw terminals). The base unit includes a Modbus serial port (2-wire RS-485, RTU, up to 38.4 kbit/s) and a Modbus TCP Ethernet port (10/100 Mbit/s, half/full duplex, auto-negotiation). For I/O expansion, Slot A or B takes a digital/analog extension or a relay output module. The modular version means the control unit and power module can be separated — a mechanical mounting kit and power connection set are included in the box. That simplifies panel layout when the operator interface needs to sit on a door and the heat-generating part stays in the cabinet. ## Sourcing The ATV600 series is an active, in-production drive. Its modular version supports fieldbus options like Profibus DP V1, PROFINET, and DeviceNet.","metaTitle":"Schneider ATV6A0C13S6 ATV600 Drive, 150 hp, 131 A, STO SIL3","metaDescription":"Schneider Electric Altivar Process ATV600 modular drive. 150 hp at 600 V normal duty, 131 A line current. Integrated EMC filter C3. STO SIL3. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV6A0C13S6","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"69 dB 86/188/EEC","Option card":"Slot A communication module, Profibus DP V1 Slot A communication module, PROFINET Slot A communication module, DeviceNet Slot A communication module, Modbus TCP/EtherNet/IP Slot A communication module, CANopen daisy chain RJ45 Slot A communication module, CANopen SUB-D 9 Slot A communication module, CANopen screw terminals Slot A/slot B digital and analog I/O extension module Slot A/slot B output relay extension module","description":"Variable speed drive, Altivar Process ATV600, APM, single 600 V, 150 hp","Line current":"131.0 A 600 V normal duty) 112.0 A 600 V heavy duty)","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"136 kVA at 600 V normal duty 116 kVA at 600 V heavy duty","Motor power hp":"150.0 hp at 600 V normal duty 125.0 hp at 600 V heavy duty","Output voltage":"<= power supply voltage","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 1.0 power module 200 kW","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV600","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV6A0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"< 2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Braking to standstill":"By DC injection","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","Power dissipation in W":"Forced convection 2510 W 2.5 kHz normal duty) Forced convection 2190 W 2.5 kHz heavy duty)","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Can be suppressed Adjustable Automatic whatever the load Not available in permanent magnet motor law","Number Of Preset Speeds":"16 preset speeds","Network number of phases":"3 phases","Continuous output current":"145.0 A at 2.5 kHz normal duty 125.0 A at 2.5 kHz heavy duty","Maximum transient current":"159.5 A 60 s normal duty) 187.5 A 60 s heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"600 V - 15...10 %","Communication port protocol":"Ethernet Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 Humidity resistant class 3K3 IEC 60721-3-3","Product specific application":"Process and utilities","Speed drive output frequency":"0...500 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Constant torque standard Variable torque standard Optimized torque mode","Acceleration and deceleration ramps":"S, U or customized Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.1 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/ATV6A0C13S6/variable-speed-drive-altivar-process-atv600-apm-single-600-v-150-hp/"},"ai":{"faq":[{"question":"What are the key ratings of the ATV6A0C13S6?","answer":"It is rated 150 hp at 600 V normal duty (125 hp heavy duty), with a line current of 131 A normal duty (112 A heavy duty). Integrated EMC filter C3 for 300 m cable."},{"question":"What compliance certifications does it carry?","answer":"CE marking plus IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and UL 61800-5-1."},{"question":"What is the difference between the normal duty and heavy duty ratings?","answer":"Normal duty gives the higher motor power (150 hp) and line current (131 A). Heavy duty reduces to 125 hp and 112 A for more demanding load profiles or higher ambient temperatures."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV6A0C13S6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV6A0C13S6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}