{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV6A0C50T6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV6A0C50T6","canonicalUrl":"https://aoctrl.com/schneider/ATV6A0C50T6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV6A0C50T6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV600, modular version, 550 hp normal duty / 450 hp heavy duty at 600 V, 464 A normal duty line current, integrated EMC filter Category C3, Safe Torque Off SIL 3, cabinet mount.","salesMarkdown":"## Rating breakdown: normal vs heavy duty The ATV6A0C50T6: The normal duty curve (550 hp, 464 A) suits constant-torque or variable-torque loads with moderate overloads. The heavy duty curve (450 hp, 383 A) provides higher overload capacity – typically for conveyors, crushers, or extruders. The 8 kVA gap between the two duty points (482 vs 398 kVA) reflects the headroom the drive reserves for transient overloads. Select based on the motor's peak torque demand, not just the nameplate horsepower. ## Safety and EMC integration STO (Safe Torque Off) rated SIL 3 per IEC 61508 / IEC 13849-1 is standard – no separate safety module required for removal of torque. The integrated EMC filter covers 300 m of motor cable to Category C3, which is sufficient for most industrial environments; for longer runs or Category C2 installations an external filter is needed. Pollution degree 2, vibration and shock per IEC 60068-2-6/11 ms, altitude up to 2000 m with derating above 1000 m. Standards compliance includes IEC 61800-3, UL 61800-5-1 (Type 1/12 enclosure), and IEC 61000-3-12 (THDI <48% at full load). ## Cabinet mounting notes Cabinet mount only – no standalone enclosure rating. The kit composition includes the control unit, mechanical mounting kits, power connection set of fuses, and a 200 kW power module with front cover. Line side termination uses M10 x 2 bars; control wiring is via removable screw terminals (0.5–1.5 mm² / AWG 20–16). Forced convection cooling means clear airflow around the heatsink – maintain the manufacturer's minimum clearance. Slot A accepts one communication option card; Slot B is available for I/O or relay extensions. Prospective line Isc is 50 kA – coordinate upstream fuses or breakers accordingly. ## Sourcing posture The ATV6A0C50T6 is an active, current-production part (lifecycle stage: current). No obsolescence horizon announced. This is a large-drive SKU (550 hp class), typically quoted to order rather than held available via RFQ confirmation at distribution. Lead time depends on factory load and configuration – submit an RFQ for a firm delivery commitment. For BOM planning, treat it as a standard lead-time item with no risk of last-time buy.","metaTitle":"Schneider ATV6A0C50T6 ATV600 Drive, 550 HP, STO SIL3","metaDescription":"Schneider Electric ATV6A0C50T6 Altivar Process ATV600 drive, 550 hp normal duty at 600 V, safe torque off SIL 3, integrated EMC C3, active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV6A0C50T6","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"71 dB 86/188/EEC","Option card":"Slot A communication module, Profibus DP V1 Slot A communication module, PROFINET Slot A communication module, DeviceNet Slot A communication module, Modbus TCP/EtherNet/IP Slot A communication module, CANopen daisy chain RJ45 Slot A communication module, CANopen SUB-D 9 Slot A communication module, CANopen screw terminals Slot A/slot B digital and analog I/O extension module Slot A/slot B output relay extension module","description":"Variable speed drive, Altivar Process ATV600, APM, single 600 V, 550 hp","Line current":"464.0 A 600 V normal duty) 383.0 A 600 V heavy duty)","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"482 kVA at 600 V normal duty 398 kVA at 600 V heavy duty","Motor power hp":"550.0 hp at 600 V normal duty 450.0 hp at 600 V heavy duty","Output voltage":"<= power supply voltage","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 3.0 power module 200 kW 2 front cover","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV600","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV6A0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"< 2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Braking to standstill":"By DC injection","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","Power dissipation in W":"Forced convection 8960 W 2.5 kHz normal duty) Forced convection 7460 W 2.5 kHz heavy duty)","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Can be suppressed Adjustable Automatic whatever the load Not available in permanent magnet motor law","Number Of Preset Speeds":"16 preset speeds","Network number of phases":"3 phases","Continuous output current":"520.0 A at 2.5 kHz normal duty 425.0 A at 2.5 kHz heavy duty","Maximum transient current":"572 A 60 s normal duty) 637.5 A 60 s heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"600 V - 15...10 %","Communication port protocol":"Ethernet Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 Humidity resistant class 3K3 IEC 60721-3-3","Product specific application":"Process and utilities","Speed drive output frequency":"0...500 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Constant torque standard Variable torque standard Optimized torque mode","Acceleration and deceleration ramps":"S, U or customized Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.1 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV6A0C50T6/variable-speed-drive-altivar-process-atv600-apm-single-600-v-550-hp/"},"ai":{"faq":[{"question":"What compliance documentation does the ATV6A0C50T6 carry?","answer":"It complies with IEC 61800-3 (EMC), IEC 61800-5-1 (safety), UL 61800-5-1 (Type 1/12), IEC 61000-3-12 (harmonic current), IEC 61508 / ISO 13849-1 (functional safety), and IEC 60721-3 (environmental). Marking is CE."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV6A0C50T6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV6A0C50T6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}