{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV6A0M10T4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV6A0M10T4","canonicalUrl":"https://aoctrl.com/schneider/ATV6A0M10T4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV6A0M10T4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Altivar Process ATV600, modular drive, ATV6A0M10T4, 1000 kW normal duty at 480 V, integrated EMC filter C3, STO SIL 3.","salesMarkdown":"The Schneider ATV6A0M10T4 is an Altivar Process ATV600 modular drive rated for 1000 kW normal duty at 480 V (800 kW heavy duty), with integrated EMC filter compliant to IEC 61800-3 category C3 and safe torque off (STO) certified to SIL 3 per IEC 61508. It draws 1692 A line current at 480 V in normal duty, 1362 A in heavy duty, with a maximum THDI under 48% at full load. ## Safety and Compliance Functional safety is declared at SIL 3 for the STO function, documented through the listed standards IEC 61508 and IEC 13849-1. The drive also meets IEC 61800-5-1 for electrical safety and UL 61800-5-1 for North American installations. The integrated EMC filter is rated for 300 m cable (984.3 ft) and complies with IEC 61800-3 category C3, meaning it is designed for industrial power networks where the supply impedance is low. CE marking is present on the drive, and the pollution degree is 2 per IEC 61800-5-1, which covers typical industrial environments. ## Supply and I/O Configuration The control section provides three internal supplies: 24 V DC for digital inputs (19...30 V), 10.5 V DC for a reference potentiometer (1 to 10 kOhm), and a dedicated 24 V DC rail for digital inputs and STO (21...27 V), each with under 200 mA overload and short-circuit protection. Six discrete inputs (DI1–DI6) are programmable; DI5 and DI6 can also serve as pulse inputs up to 30 kHz. Three analog inputs (AI1–AI3) accept voltage 0–10 V DC or current 0–20/4–20 mA with 12-bit resolution. Two analog outputs (AO1, AO2) are available. ## Fieldbus and Communication Slot A accepts optional communication modules for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen daisy chain RJ45, CANopen SUB-D 9, or CANopen screw terminals. Slot A and slot B can also accept digital/analog I/O extension modules or output relay extension modules. Embedded Ethernet supports Modbus TCP at 10/100 Mbit/s with half-duplex, full-duplex, or autonegotiation. A serial RS-485 port runs Modbus RTU at 4.8, 9.6, 19.2, 38.4 kbit/s.","metaTitle":"Schneider ATV6A0M10T4 Altivar Process 1000 kW Drive","metaDescription":"Schneider ATV6A0M10T4 Altivar Process ATV600 drive, 1000 kW normal duty at 480 V, STO SIL 3, integrated EMC filter C3. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"title":"ATV6A0M10T4","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), <200 mA overload and short-circuit protection","Marking":"CE","Variant":"Modular version","Accuracy":"+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"75 dB 86/188/EEC","Option card":"Slot A communication module, Profibus DP V1 Slot A communication module, PROFINET Slot A communication module, DeviceNet Slot A communication module, Modbus TCP/EtherNet/IP Slot A communication module, CANopen daisy chain RJ45 Slot A communication module, CANopen SUB-D 9 Slot A communication module, CANopen screw terminals Slot A/slot B digital and analog I/O extension module Slot A/slot B output relay extension module","description":"variable speed drive, Altivar Process ATV600, APM, single 480V, 1400hp","Line current":"1692.0 A 480 V normal duty) 1362.0 A 480 V heavy duty)","Maximum THDI":"<48 % full load","Refresh time":"Relay output R1, R2, R3)5 ms +/- 0.5 ms)","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"1172 kVA at 480 V normal duty 944 kVA at 480 V heavy duty","Motor power hp":"1400.0 hp at 480 V normal duty 1100.0 hp at 480 V heavy duty","Motor power kW":"1000.0 kW at 480 V normal duty 800.0 kW at 480 V heavy duty","Output voltage":"<= power supply voltage","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 6 power module 160 kW 5 front cover","Linearity error":"AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AO1, AO2 +/- 0.2 % analog output","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Local signalling":"3 LEDs for local diagnostic 3 LEDs (dual colour) for embedded communication status 4 LEDs (dual colour) for communication module status","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV600","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV6A0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Relay output type":"Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 100000 cycles Configurable relay logic R3 sequence relay NO 100000 cycles","Sampling duration":"2 ms +/- 0.5 ms DI1...DI4) - discrete input 5 ms +/- 1 ms DI5, DI6) - discrete input 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input 10 ms +/- 1 ms AO1) - analog output","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"0...4800 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Analogue input type":"AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits","Discrete input type":"DI1...DI6 programmable, 24 V DC DI5, DI6 programmable as pulse input 0...30 kHz, 24 V DC STOA, STOB safe torque off, 24 V DC 2.2 kOhm","Input compatibility":"DI1...DI6 discrete input level 1 PLC IEC 61131-2 DI5, DI6 discrete input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC IEC 61131-2","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2.5...8 kHz with derating factor 2...8 kHz adjustable","Analogue output type":"Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits Software-configurable current AO1, AO2 0...20 mA 10 bits","Discrete input logic":"Positive logic (source) DI1...DI6), < 5 V, > 11 V Negative logic (sink) DI1...DI6), > 16 V, < 10 V Positive logic (source) DI5, DI6), < 0.6 V, > 2.5 V Positive logic (source) STOA, STOB), < 5 V, > 11 V","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Braking to standstill":"By DC injection","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","Power dissipation in W":"Forced convection 26820 W 2.5 kHz normal duty) Forced convection 20380 W 2.5 kHz heavy duty)","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Can be suppressed Adjustable Automatic whatever the load Not available in permanent magnet motor law","Number Of Preset Speeds":"16 preset speeds","Network number of phases":"3 phases","Continuous output current":"1770.0 A at 2.5 kHz normal duty 1420.0 A at 2.5 kHz heavy duty","Maximum switching current":"Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC","Maximum transient current":"1947 A 60 s normal duty) 2130 A 60 s heavy duty)","Minimum switching current":"Relay output R1, R2, R3 5 mA 24 V DC","Product or component type":"Variable speed drive","[Us] rated supply voltage":"480 V - 15...10 %","Communication port protocol":"Ethernet Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 Humidity resistant class 3K3 IEC 60721-3-3","Product specific application":"Process and utilities","Speed drive output frequency":"0...500 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Constant torque standard Variable torque standard Optimized torque mode","Acceleration and deceleration ramps":"S, U or customized Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.1 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/ATV6A0M10T4/variable-speed-drive-altivar-process-atv600-apm-single-480v-1400hp/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for ATV6A0M10T4?","answer":"The drive is certified to IEC 61800-3 (EMC), IEC 61800-5-1 (electrical safety), IEC 61000-3-12 (harmonic limits), IEC 60721-3 (environmental), IEC 61508 and IEC 13849-1 (functional safety for STO SIL 3), and UL 61800-5-1. A declaration of conformity covering these standards is available."},{"question":"What are the supply voltage ratings for the control inputs?","answer":"The drive provides an external supply for digital inputs at 24 V DC (19...30 V), an internal supply for a reference potentiometer at 10.5 V DC ±5% (for 1 to 10 kOhm), and an internal supply for digital inputs and STO at 24 V DC (21...27 V). All three supplies have <200 mA overload and short-circuit protection."},{"question":"What markings appear on the drive?","answer":"The drive carries CE marking."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV6A0M10T4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV6A0M10T4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}