{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV6B0C63Q6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV6B0C63Q6","canonicalUrl":"https://aoctrl.com/schneider/ATV6B0C63Q6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV6B0C63Q6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV600 series, modular drive ATV6B0C63Q6, rated 630 kW at 690 V normal duty, 568 A line current, integrated EMC filter C3, STO SIL3, cabinet mount.","salesMarkdown":"## Drive rating and integration brief The Schneider ATV6B0C63Q6 is a modular Altivar Process ATV600 drive sized for 630 kW normal-duty or 500 kW heavy-duty loads at 690 V, with corresponding line currents of 568 A and 453 A. The output voltage matches the supply voltage, so no step-up transformer is needed for standard 690 V networks. Integrated EMC filter rated for 300 m motor cables meets IEC 61800-3 category C3, covering most CE-marked industrial installations without an add-on filter. Safe torque off (STO) is certified to SIL 3, allowing direct integration into safety circuits up to that level without external safety contactors. The drive cabinet-mounts with forced convection cooling; clearance for airflow must be factored into the enclosure design. Cooling is rated for ambient 50...60 Hz supply frequency. This drive carries CE marking and complies with IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic limits), IEC 60721-3 (environmental), IEC 61508 and IEC 13849-1 (functional safety). The EMC filter is integral for category C3 environments. Lifecycle status is currently active — standard new-build procurement applies, no end-of-life notice pending. Protection functions cover thermal, overcurrent, short-circuit, earth fault, overspeed, and line supply anomalies, as well as motor phase break and thermal protection. ## Fieldbus and control options Slot A accepts communication option cards for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, and CANopen (RJ45, SUB-D 9, or screw terminals). Slot A/B also accepts digital/analog I/O and relay extension modules. Built-in Modbus serial is 2-wire RS-485, RTU frame, addressable 1…247 at 4.8 to 38.4 kbit/s. The Ethernet port handles 10/100 Mbit/s with half/full duplex autonegotiation for Modbus TCP. Total harmonic current distortion (THDI) is below 5% at full load per IEEE 519, reducing upstream filter requirements. ## Sourcing notes The ATV6B0C63Q6 is an active, current-production drive from Schneider. Procurement is via quote-to-order — confirm your duty point and any option cards (Slot A module, I/O extension) at RFQ to lock lead time.","metaTitle":"Schneider ATV6B0C63Q6 Altivar Process 630kW Drive","metaDescription":"Active ATV6B0C63Q6 Altivar Process drive, 630 kW at 690 V normal duty, STO SIL3, integrated EMC filter C3, modular version. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV6B0C63Q6","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"75 dB 86/188/EEC","Option card":"Slot A communication module, Profibus DP V1 Slot A communication module, PROFINET Slot A communication module, DeviceNet Slot A communication module, Modbus TCP/EtherNet/IP Slot A communication module, CANopen daisy chain RJ45 Slot A communication module, CANopen SUB-D 9 Slot A communication module, CANopen screw terminals Slot A/slot B digital and analog I/O extension module Slot A/slot B output relay extension module","description":"Variable speed drive, Altivar Process ATV600, APM, Low Harmonic 600 V, 630 kW","Line current":"568.0 A 690 V normal duty) 453.0 A 690 V heavy duty)","Maximum THDI":"<5 % full load IEEE 519","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"678 kVA at 690 V normal duty 541 kVA at 690 V heavy duty","Motor power kW":"630.0 kW at 690 V normal duty 500.0 kW at 690 V heavy duty","Output voltage":"<= power supply voltage","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 3.0 power module 200 kW 2 front cover","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV600","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz - 5...5 %","Device short name":"ATV6B0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"< 2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Braking to standstill":"By DC injection","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","Power dissipation in W":"Forced convection 23500 W 2.5 kHz normal duty) Forced convection 18600 W 2.5 kHz heavy duty)","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Can be suppressed Adjustable Automatic whatever the load Not available in permanent magnet motor law","Number Of Preset Speeds":"16 preset speeds","Network number of phases":"3 phases","Continuous output current":"650.0 A at 2.5 kHz normal duty 520.0 A at 2.5 kHz heavy duty","Maximum transient current":"715 A 60 s normal duty) 780 A 60 s heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"690 V - 10...10 %","Communication port protocol":"Ethernet Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 Humidity resistant class 3K3 IEC 60721-3-3","Product specific application":"Process and utilities","Speed drive output frequency":"0...500 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Constant torque standard Variable torque standard Optimized torque mode","Acceleration and deceleration ramps":"S, U or customized Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.1 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/ATV6B0C63Q6/variable-speed-drive-altivar-process-atv600-apm-low-harmonic-600-v-630-kw/"},"ai":{"faq":[{"question":"What is the CE marking status?","answer":"The drive carries CE marking as listed on the nameplate."},{"question":"What is the variant of this drive?","answer":"It is a modular version of the Altivar Process ATV600 series."},{"question":"What compliance documentation does this drive support?","answer":"It conforms to IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1."},{"question":"What are the key electrical ratings?","answer":"Motor power 630 kW normal duty / 500 kW heavy duty at 690 V; line current 568 A normal / 453 A heavy duty; apparent power 678 kVA / 541 kVA."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV6B0C63Q6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV6B0C63Q6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}