{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930C11N4C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930C11N4C","canonicalUrl":"https://aoctrl.com/schneider/ATV930C11N4C","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930C11N4C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, ATV930C11N4C variable speed drive, 3-phase 380-480 V, 110 kW normal duty / 90 kW heavy duty, 211 A nominal output current, IP21, UL Type 1 enclosure, wall-mount.","salesMarkdown":"## 110 kW drive for asynchronous and synchronous motors The ATV930C11N4C is a 110 kW normal duty / 90 kW heavy duty variable speed drive from the Altivar Process ATV900 family, designed for 3-phase 380-480 V supplies. It delivers 211 A continuous at 2.5 kHz switching in normal duty, and 173 A in heavy duty — the rating that governs the motor sizing for constant-torque loads like conveyors or extruders. This is the standard version without a built-in braking chopper. If the application needs dynamic braking for overhauling loads (cranes, centrifuges, vertical conveyors), an external braking resistor and chopper module must be added. ## Current ratings and duty selection At 2.5 kHz switching frequency, the drive delivers 211 A continuous in normal duty (110 kW typical motor) and 173 A in heavy duty (90 kW). Heavy duty is the spec to use for constant-torque or high-starting-torque applications — the drive's thermal capacity is sized to the HD current, not the ND figure. The switching frequency can be raised above 2.5 kHz, but the continuous output current must be derated per the drive's thermal model. At higher carrier frequencies, motor acoustic noise drops but the drive's IGBT junction temperature rises, reducing the available output. ## Mounting, enclosure, and environmental limits Wall-mount enclosure, IP21 / UL Type 1 — suitable for indoor, clean environments. The drive must be mounted vertically within ±10° for proper convective cooling. Forced air volume is 600 m³/h; the fan intake and exhaust need clearance per the installation manual. Rated for 1000 m altitude without derating. Above that, derate output current 1% per 100 m up to 4800 m. Ambient temperature range is not listed in this record, but the cooling air volume and IP21 enclosure suggest a standard 40-50 °C ambient ceiling — confirm the derating curve for the specific installation. Vibration resistance: 1.5 mm peak-to-peak at 2-13 Hz, 1 gn at 13-200 Hz per IEC 60068-2-6. Shock: 15 gn for 11 ms per IEC 60068-2-27. The drive can handle the mechanical environment of a typical motor control centre or panel on a concrete floor. ## Communications, I/O, and option slots Embedded communication ports support EtherNet/IP, Modbus serial, and Modbus TCP. The Ethernet port handles 10/100 Mbit with half/full duplex and autonegotiation. A serial port runs at 9600 or 19200 bps, 8-bit data with configurable parity. Three option slots (A, B, C) accept fieldbus modules (Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, Ethernet Powerlink), I/O extension modules, encoder interface modules (digital 5/12 V, analog, resolver), and relay output modules. Slot A is typically used for the primary fieldbus; slots B and C for encoder feedback or additional I/O. Internal 24 V DC supply for digital inputs and STO (safe torque off) — 21-27 V DC. Separate 10.5 V DC reference for a 1-10 kΩ potentiometer. External 24 V DC supply (19-30 V) can also be used for digital inputs. ## Standards, approvals, and grid compliance Listed to UL 508C (power conversion equipment) and carries CE marking. Complies with IEC 61800-3 (EMC environment), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic emissions), IEC 60721-3 (environmental classification), IEC 61508 (functional safety), and IEC 13849-1 (safety-related parts). Overvoltage category III, pollution degree 2. Integrated EMC filter meets conducted emission limits for the intended installation environment; an optional EMC plate is available for higher-performance filtering. Total harmonic current distortion (THDI) is <48% at full load per IEC 61000-3-12.","metaTitle":"Schneider ATV930C11N4C Altivar Process VFD, 110 kW, 211 A","metaDescription":"ATV930C11N4C Altivar Process 900 VFD, 3-phase 380-480 V, 110 kW ND / 90 kW HD, 211 A output, IP21, UL Type 1. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","title":"ATV930C11N4C","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version Without braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"69.9 dB","description":"variable speed drive, ATV930, 110kW, 400/480V, w/o braking unit, IP00","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"110.0 kW normal duty 90.0 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Synchronous motors Asynchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 2 x 50...3 x 120 mm² AWG 1/0...300 kcmil Motor screw terminal 2 x 50...3 x 120 mm² AWG 1/0...300 kcmil DC bus screw terminal 2 x 50...3 x 120 mm² AWG 1/0...300 kcmil","Nbr. of units in pkg.":"1","Volume of cooling air":"158506.07 Gal/hr(US) (600 m3/h)","Nominal Output Current":"211.0 A","IP degree of protection":"IP21","Continuous output current":"211 A 2.5 kHz normal duty 173 A 2.5 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"EtherNet/IP Modbus serial Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,211.57","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/ATV930C11N4C/variable-speed-drive-atv930-110kw-400-480v-w-o-braking-unit-ip00/"},"ai":{"faq":[{"question":"What compliance documentation is available for the ATV930C11N4C?","answer":"The drive carries CE marking and is listed to UL 508C. It complies with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. The manufacturer provides the full declaration of conformity and installation manual with the unit."},{"question":"How can I order the ATV930C11N4C or check availability?","answer":"Sourced to order against the BOM quantity through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930C11N4C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930C11N4C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}