{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930C31N4C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930C31N4C","canonicalUrl":"https://aoctrl.com/schneider/ATV930C31N4C","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930C31N4C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, ATV930C31N4C variable speed drive, 3-phase 380-480 V, 315 kW normal duty / 250 kW heavy duty, 616 A nominal output current, IP21, UL Type 1 enclosed.","salesMarkdown":"## What the 616 A output means for your motor load The ATV930C31N4C is a 380-480 V 3-phase variable speed drive from the Altivar Process ATV900 series, rated for 315 kW normal duty and 250 kW heavy duty. The nominal output current is 616 A at 2.5 kHz switching frequency for normal duty, dropping to 481 A at 2.5 kHz for heavy-duty applications — that's the continuous current the drive delivers to the motor without tripping on overload. Heavy duty (250 kW) means the drive handles 120% overload for 60 seconds, typical for crushers, conveyors, or extruders that need intermittent torque spikes. Normal duty (315 kW) suits centrifugal pumps and fans where the load profile is steady. The 616 A figure is the hard ceiling at the rated switching frequency — push the carrier frequency higher and you derate the current. ## Panel fit and environmental tolerance Wall-mount enclosed assembly with IP21 and UL Type 1 protection — it keeps out fingers and solid objects larger than 12 mm, but it's not sealed against dust or water spray. In a cement plant or any dusty environment, you'll want it inside a clean cabinet or add a higher-IP enclosure around it. The operating position is vertical within ±10 degrees; forced-air cooling moves 1260 m³/h through the heatsink, so clearance around the unit matters for airflow. Vibration resistance is 1.5 mm peak-to-peak at 2-13 Hz and 1 gn at 13-200 Hz per IEC 60068-2-6. Shock rating is 15 gn for 11 ms per IEC 60068-2-27. That's enough for most industrial floor installations, but if you're mounting it on a vibrating screen or near a hammer mill, check the mounting structure isolates the drive from the source. Altitude derating starts at 1000 m — above that, derate current 1% per 100 m up to 3000 m. Ambient conditions: 5-95% relative humidity without condensation per IEC 60068-2-3, pollution degree 2 environment. The drive is rated for 50°C ambient without derating in most configurations, but the cooling air volume (1260 m³/h) tells you it moves a lot of air — keep the intake and exhaust clear. Sourced through authorized distribution channels; quoted to order against your BOM quantity. The drive accepts communication option modules for Profibus DP, PROFINET, DeviceNet, EtherCAT, CANopen, and Ethernet Powerlink in Slot A, plus I/O and encoder extension modules in Slots A/B/C. ## Wiring and connection notes Line, motor, and DC bus connections use screw terminals accepting 4 x 185 mm² or 3 x 350 kcmil — that's substantial cable for 616 A. Control wiring is 0.5-1.5 mm² (AWG 20-16) screw terminals. The external supply for digital inputs is 24 V DC (19-30 V); there's also a 10.5 V DC internal supply for a reference potentiometer (1-10 kΩ) and a separate 24 V DC (21-27 V) internal supply for digital inputs and STO. Communication ports support EtherNet/IP, Modbus serial, and Modbus TCP with transmission rates of 10/100 Mbits and 4.8-19200 bit/s for serial. The data format is 8 bits with configurable odd, even, or no parity. Up to 247 addresses on the serial bus. The drive handles both asynchronous and synchronous motors — useful if you're retrofitting a permanent-magnet motor onto an existing induction motor line.","metaTitle":"Schneider Electric ATV930C31N4C Altivar Process Drive","metaDescription":"ATV930C31N4C variable speed drive, 380-480 V 3-phase, 315 kW normal duty / 250 kW heavy duty, 616 A output, IP21, UL Type 1. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","title":"ATV930C31N4C","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Without braking chopper Standard version","Category":"US1CP4E22278","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"76 dB","description":"Variable speed drive, Altivar Process ATV900, ATV930, 315 kW, 400/480 V, w/o braking unit, IP00","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"315.0 kW normal duty 250.0 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 4 x 185 mm² 3 x 350 kcmil Motor screw terminal 4 x 185 mm² 3 x 350 kcmil DC bus screw terminal 4 x 185 mm² 3 x 350 kcmil","Nbr. of units in pkg.":"1","Volume of cooling air":"332862.7 Gal/hr(US) (1260 m3/h)","Nominal Output Current":"616.0 A","IP degree of protection":"IP21","Continuous output current":"616 A 2.5 kHz normal duty 481 A 2.5 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"EtherNet/IP Modbus serial Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C2 IEC 60721-3-3 Dust pollution resistance class 3S2 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-13...158 °F (-25...70 °C)","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"14...104 °F (-10...40 °C) (without derating) 104...140 °F (40...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$15,219.68","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ae/en/product/ATV930C31N4C/variable-speed-drive-altivar-process-atv900-atv930-315-kw-400-480-v-w-o-braking-unit-ip00/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for the ATV930C31N4C?","answer":"Submit an RFQ through this listing; the drive is sourced through authorized distribution channels for the active ATV900 series."},{"question":"What compliance documentation does the ATV930C31N4C carry?","answer":"The drive is CE marked and complies with UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. Standards documentation is available from Schneider Electric's product support page."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930C31N4C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930C31N4C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}