{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D11N4US","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D11N4US","canonicalUrl":"https://aoctrl.com/schneider/ATV930D11N4US","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D11N4US","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930, variable speed drive, 380-480 V 3-phase, 11 kW normal duty / 7.5 kW heavy duty, 23.5 A output, IP21, UL type 1, standard version with braking chopper.","salesMarkdown":"The ATV930D11N4US is a 380-480 V 3-phase variable speed drive from the Altivar Process ATV900 series, rated for 11.0 kW normal duty and 7.5 kW heavy duty, with a nominal output current of 23.5 A at 4 kHz for normal duty and 16.5 A at 4 kHz for heavy duty. It comes as a standard version with an integrated braking chopper, making it ready for dynamic braking without an external chopper module on vertical loads or high-inertia stops. The drive is enclosed in an IP21 / UL type 1 wall-mount enclosure, suited for clean indoor environments where drips and falling dirt are the main concern. The 23.5 A continuous output current at 4 kHz is the headline number for normal-duty motor sizing — match it to a 11 kW 4-pole induction motor on a pump or fan. For constant-torque loads like conveyors or extruders, use the 16.5 A heavy-duty rating, which corresponds to 7.5 kW. The supply voltage range of 380-480 V covers common global industrial mains, and the 3-phase input means it will not run on single-phase — plan for a three-phase feed. The integrated EMC filter meets IEC 61800-3, and total harmonic current distortion (THDI) stays below 48 % from 80-100 % load per IEC 61000-3-12, which simplifies compliance for most installations. The drive includes an adjustable PID regulator for closed-loop process control (pressure, flow, temperature) without an external controller. ## Integration notes Mount vertically within ±10 degrees to maintain airflow; the drive requires 103 m³/h of cooling air and produces 56 dB of noise at full load. Power wiring: line and DC bus terminals accept up to 6 mm² (AWG 10), motor terminals accept 6-10 mm² (AWG 10-8). Control wiring uses screw terminals for 0.5-1.5 mm² (AWG 20-16). Three option slots (A, B, C) accept communication modules (Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, Ethernet Powerlink), I/O extension, encoder interfaces, or relay outputs — configure before installation. The drive supports Ethernet IP/Modbus TCP with half/full duplex and auto-negotiation at 10/100 Mbits, plus serial at 4.8-19200 bps. Built-in safe torque off (STO) with internal 24 V DC supply (21-27 V) and a 1 MOhm isolation test to earth at 500 V DC for 1 minute. ## Environmental limits Rated for pollution degree 2 and overvoltage category III, with operating altitude up to 4800 m (derate 1 % per 100 m above 1000 m). Withstands 15 gn shock for 11 ms and vibration of 1.5 mm peak-to-peak at 2-13 Hz / 1 gn at 13-200 Hz per IEC 60068-2-6 and 60068-2-27. Operates in 5-95 % relative humidity without condensation per IEC 60068-2-3.","metaTitle":"Schneider Electric ATV930D11N4US Altivar Process Drive, 11 k","metaDescription":"ATV930D11N4US variable speed drive, 380-480 V 3-phase, 11 kW normal duty / 7.5 kW heavy duty, 23.5 A output, IP21, UL type 1, with braking chopper. Current lifecycle stage. Sourced","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","title":"ATV930D11N4US","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"56 dB","description":"Variable Speed Drive, Altivar Process ATV900, ATV930, 11kW, 400 to 480V, with braking unit, IP21 [TAA, BAA, BABA]","Maximum THDI":"<48 % from 80...100 % of load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"11.0 kW normal duty 7.5 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Compliance/Compliance":"TAA BAA BABA BAA via COTS","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Motor screw terminal 6...10 mm² AWG 10...AWG 8 Line side screw terminal 6 mm² AWG 10 DC bus screw terminal 6 mm² AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"27210.2 Gal/hr(US) (103 m3/h)","Nominal Output Current":"23.5 A","IP degree of protection":"IP21","Continuous output current":"23.5 A 4 kHz normal duty 16.5 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"EtherNet/IP Modbus serial Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,592.18","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/ATV930D11N4US/variable-speed-drive-altivar-process-atv900-atv930-11kw-400-to-480v-with-braking-unit-ip21-taa-baa-baba/"},"ai":{"faq":[{"question":"What are the key ratings for this drive?","answer":"The drive is rated for 380-480 V 3-phase input, 11.0 kW normal duty / 7.5 kW heavy duty, with a nominal output current of 23.5 A at 4 kHz (normal duty) and 16.5 A at 4 kHz (heavy duty). It includes a braking chopper and an integrated EMC filter."},{"question":"What compliance standards does the ATV930D11N4US meet?","answer":"It carries CE marking and complies with UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. It is also TAA/BAA compliant."},{"question":"What communication options are available?","answer":"The drive has three option slots (A, B, C) for fieldbus modules including Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, and Ethernet Powerlink. It also has built-in Ethernet IP/Modbus TCP and serial ports."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D11N4US","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D11N4US when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}