{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D11N4ZU","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D11N4ZU","canonicalUrl":"https://aoctrl.com/schneider/ATV930D11N4ZU","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D11N4ZU","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930, variable speed drive, ATV930D11N4ZU, 3-phase 380-480 V, 23.5 A normal duty, 11 kW, with braking chopper.","salesMarkdown":"The ATV930D11N4ZU is a current-production variable speed drive from the Altivar Process ATV900 series, sized for 11 kW normal duty and 7.5 kW heavy duty on a 3-phase 380-480 V supply. Continuous output current is 23.5 A at 4 kHz for normal duty, 16.5 A at 4 kHz for heavy duty. An integrated braking chopper saves an external resistor module for standard deceleration profiles. The drive handles asynchronous and synchronous motors, making it a straightforward fit for pump, fan, or conveyor applications. ## Controls integration and fieldbus Built-in Ethernet/IP and Modbus TCP allow direct connection to a PLC without an option card. For legacy or multi-vendor networks, optional communication modules fit Slot A for Profibus DP, PROFINET, DeviceNet, EtherCAT, or CANopen daisy chain. Serial Modbus RTU is also present, configurable for 4.8 kbps to 100 Mbps depending on the protocol used. The control terminal block accepts 0.5-1.5 mm² wire. External 24 V DC supply (19-30 V) is required for digital inputs; an internal 24 V supply (21-27 V) powers STO and digital I/O. A 10.5 V DC reference supply is available for an external potentiometer (1-10 kOhm). Cabinet mount with IP21 / UL Type 12 protection. The drive must be vertical (within +/-10 degrees). Installation at altitude above 1000 m requires derating current by 1% per 100 m up to 4800 m. Vibration resistance to IEC 60068-2-6: 1.5 mm pk-pk at 2-13 Hz, 1 gn at 13-200 Hz. Shock rated at 15 gn, 11 ms. Cooling air volume is 103 m³/h. Pollution degree 2, overvoltage category III, and compliance with UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonics), IEC 60721-3 (environmental), IEC 61508 and 13849-1 (functional safety). Total harmonic current distortion (THDI) below 48% from 80 to 100% load per IEC 61000-3-12.","metaTitle":"Schneider ATV930D11N4ZU Altivar Process, 11 kW normal duty","metaDescription":"ATV930D11N4ZU 3-phase 380-480 V VSD, 23.5 A / 16.5 A ND/HD, braking chopper, Ethernet/IP & Modbus TCP. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"3 phase","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22276","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"56 dB","Maximum THDI":"<48 % from 80...100 % of load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Cabinet mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"With heat sink","Motor power kW":"11.0 kW normal duty 7.5 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 12","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Motor screw terminal 6...10 mm² AWG 10...AWG 8 Line side screw terminal 6 mm² AWG 10 DC bus screw terminal 6 mm² AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"27210.2 Gal/hr(US) (103 m3/h)","Nominal Output Current":"23.5 A","IP degree of protection":"IP21","Continuous output current":"23.5 A 4 kHz normal duty 16.5 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"EtherNet/IP Modbus serial Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,375.00 – $3,071.87","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c48cf12f3c9521480f983584fe8cd32a.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV930D11N4ZU/alternatives.json"},"ai":{"faq":[{"question":"What is the rated phase and voltage?","answer":"It is a 3-phase drive with rated supply voltage 380...480 V."},{"question":"What compliance standards does it meet?","answer":"It complies with UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1."},{"question":"What communication protocols are built in?","answer":"Built-in Ethernet/IP, Modbus TCP, and Modbus serial. Optional slot-based modules add Profibus DP, PROFINET, DeviceNet, EtherCAT, CANopen, or Ethernet Powerlink."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D11N4ZU","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D11N4ZU when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}