{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D22M3","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D22M3","canonicalUrl":"https://aoctrl.com/schneider/ATV930D22M3","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D22M3","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930, ATV930D22M3 variable speed drive, 22.0 kW normal duty / 18.5 kW heavy duty, 200...240 V 3-phase, 92.6 A nominal output current, IP21, UL Type 1, with integrated braking chopper.","salesMarkdown":"## Drive rating and motor match The ATV930D22M3 is a 22.0 kW normal-duty variable speed drive from the Altivar Process 930 series, delivering 92.6 A continuous output at 4 kHz carrier for normal duty, or 78.4 A at 4 kHz for heavy-duty 18.5 kW applications. Rated supply is 200...240 V 3-phase, making it a low-voltage drive for North American 208/240 VAC line-fed motors — common on conveyor, pump, and fan loads in panel builds. ## What the output current means for your load The 92.6 A nominal output current at 4 kHz sets the thermal limit for continuous motor current. For heavy-duty cycles (crane, extruder, high-start-torque loads), the drive is rated 78.4 A at the same carrier — the 18 % derating reflects the higher sustained current demand under shock load. Raising the carrier frequency above 4 kHz quiets motor whine but derates the continuous current further — budget the thermal budget per the drive's derating curve, not the nameplate. The integrated braking chopper (standard variant) dumps regenerative energy to an external resistor, so the drive handles fast deceleration on high-inertia loads without tripping on DC-bus overvoltage. ## Panel fit and environmental tolerance Wall-mount enclosed design with IP21 and UL Type 1 protection — suitable for indoor, non-washdown environments. The IP21 rating means it resists solid objects >12.5 mm and dripping water, but not hose-down or condensation-prone locations. For a panel at 1500 m elevation, expect a 5 % current reduction from the 92.6 A figure. Vibration tolerance is 1.5 mm peak-to-peak at 2...13 Hz and 1 gn at 13...200 Hz per IEC 60068-2-6 — adequate for floor-mounted panels near rotating machinery but not for direct machine-mount on a vibrating conveyor. Shock resistance rated 15 gn for 11 ms per IEC 60068-2-27 — the drive can survive shipping drops and occasional impacts but not repeated hammering from a press brake. ## Communication and I/O expansion Native protocols include Modbus serial, Modbus TCP, and EtherNet/IP on the base unit. For fieldbus integration into Profibus DP, PROFINET, DeviceNet, EtherCAT, or CANopen networks, the drive accepts plug-in option modules in Slot A. Slot A/B/C accept digital/analog I/O extension modules, output relay modules, and encoder interface modules (digital 5/12 V, analog, or resolver). This lets you add local I/O without a separate remote rack — useful for stand-alone pump or conveyor stations. Transmission rates span 4.8 kbps to 100 Mbits, covering both legacy serial (Modbus serial at 9600/19200 bps) and high-speed Ethernet/IP at 100 Mbits. The autonegotiation on the Ethernet port simplifies commissioning — plug into a managed switch and it sets speed/duplex automatically. ## Compliance and standards coverage Listed to UL 508C (power conversion equipment) and carries CE marking. Standards include IEC 61800-3 (EMC environment), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic limits), IEC 61508 (functional safety), and IEC 13849-1 (safety-related parts). Integrated EMC filter meets conducted emission limits for industrial environments; an optional EMC plate is available for higher-performance installations. Pollution degree 2 rating means the drive is designed for normal, non-conductive pollution environments — typical for a clean, climate-controlled panel. Not rated for dusty or conductive atmospheres without additional enclosure. For MRO spares planning, the drive is part of the Altivar Process 930 family, which shares option modules and accessories across the range. Stocking a common communication module or I/O extension reduces line-down risk for multiple drive sizes.","metaTitle":"Schneider Electric ATV930D22M3 Altivar Process 930, 22 kW","metaDescription":"Schneider Electric ATV930D22M3 variable speed drive, 22 kW normal duty, 92.6 A output, 200-240 V 3-phase. IP21, UL Type 1. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 240V"],"specifications":{"Phase":"3 phase","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"71.5 dB","Maximum THDI":"<48 % from 80...100 % of load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"22.0 kW normal duty 18.5 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 35...50 mm² AWG 2...AWG 1 Motor screw terminal 50 mm² AWG 1 DC bus screw terminal 35...50 mm² AWG 3...AWG 1","Nbr. of units in pkg.":"1","Volume of cooling air":"63402.4 Gal/hr(US) (240 m3/h)","Nominal Output Current":"92.6 A","IP degree of protection":"IP21","Continuous output current":"92.6 A 4 kHz normal duty 78.4 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"200...240 V","Communication Port Protocol":"Modbus serial Modbus TCP EtherNet/IP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,991.36","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/ATV930D22M3/variable-speed-drive-atv930-22kw-200-240v-with-braking-unit-ip21/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV930D22M3/alternatives.json"},"ai":{"faq":[{"question":"What is the ATV930D22M3's phase and supply voltage?","answer":"It is a 3-phase drive rated for 200...240 V supply. The control section accepts an external 24 V DC supply for digital inputs (19...30 V), and provides internal 10.5 V DC for a reference potentiometer and 24 V DC for digital inputs and STO."},{"question":"What compliance documentation does the ATV930D22M3 carry?","answer":"It is CE marked and listed to UL 508C. Standards include IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. The drive includes an integrated EMC filter."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D22M3","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D22M3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}