{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D22N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D22N4","canonicalUrl":"https://aoctrl.com/schneider/ATV930D22N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D22N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, ATV930D22N4 variable speed drive, 22.0 kW normal duty / 18.5 kW heavy duty, 46.3 A continuous output, 380...480 V 3-phase, IP21, wall-mount, with integrated braking chopper and EMC filter.","salesMarkdown":"## Duty ratings and output current The ATV930D22N4 is rated 22.0 kW normal duty and 18.5 kW heavy duty, with continuous output current of 46.3 A at 4 kHz for normal duty and 39.2 A at 4 kHz for heavy duty — the heavy-duty figure governs applications with constant-torque loads like conveyors or extruders where the drive must sustain full torque at low speed without derating. Wall-mount assembly, operating position vertical ±10 degrees, with 215 m³/h cooling air volume — plan for clearance above and below the drive for airflow, and check that the ambient stays within the 5...95 % non-condensing humidity envelope. ## Fieldbus and I/O expansion Three option slots (A, B, C) accept communication modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (daisy-chain RJ45, SUB-D 9, or screw terminals), and Ethernet Powerlink — plus digital/analog I/O extension and output relay modules. Native communication ports carry Modbus serial, EtherNet/IP, and Modbus TCP at 10/100 Mbits, with auto-negotiation half/full duplex — the drive integrates directly into a Rockwell or Schneider control architecture without a gateway. ## Compliance and safety standards Integrated EMC filter with optional EMC plate meets IEC 61000-3-12 harmonic limits; total harmonic current distortion (THDI) is below 48 % from 80 to 100 % load — sufficient for most industrial installations without external line reactors. ## Production status and sourcing Listed as current production — the ATV930D22N4 is an active Altivar Process model, not a legacy or end-of-life SKU.","metaTitle":"Schneider ATV930D22N4 Altivar Process Drive, 22 kW, 46.3 A","metaDescription":"Schneider Electric ATV930D22N4 Altivar Process variable speed drive, 22 kW normal duty / 18.5 kW heavy duty, 46.3 A output, 380-480 V 3-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","title":"ATV930D22N4","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"59.5 dB","description":"variable speed drive - ATV930 - 22kW - 400/480V - with braking unit - IP21","Maximum THDI":"<48 % from 80...100 % of load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"22.0 kW normal duty 18.5 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Synchronous motors Asynchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 10...16 mm² AWG 8...AWG 6 DC bus screw terminal 10...16 mm² AWG 8...AWG 6 Motor screw terminal 16 mm² AWG 6","Nbr. of units in pkg.":"1","Volume of cooling air":"56798.008 Gal/hr(US) (215 m3/h)","Nominal Output Current":"46.3 A","IP degree of protection":"IP21","Continuous output current":"46.3 A 4 kHz normal duty 39.2 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"Modbus serial EtherNet/IP Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,449.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ae/en/product/ATV930D22N4/variable-speed-drive-atv930-22kw-400-480v-with-braking-unit-ip21/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for ATV930D22N4?","answer":"The drive carries CE marking and is certified to UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. The integrated EMC filter meets IEC 61000-3-12 harmonic limits."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D22N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D22N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}