{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D22Y6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D22Y6","canonicalUrl":"https://aoctrl.com/schneider/ATV930D22Y6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D22Y6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930D22Y6 variable speed drive, 500-690 V 3-phase, 29 A nominal output, 18.5 kW normal duty / 15.0 kW heavy duty, IP21, UL type 1, with integrated braking chopper.","salesMarkdown":"## 500-690 V drive for 18.5 kW motor loads The ATV930D22Y6 is a 3-phase input variable speed drive from the Altivar Process ATV900 series, rated for supply voltages from 500 to 690 V. It delivers 29 A continuous output current at 4 kHz carrier frequency in normal duty, enough for an 18.5 kW asynchronous or synchronous motor. For applications requiring sustained overload capacity, the heavy-duty rating drops to 24 A at 4 kHz, supporting a 15.0 kW motor. The drive ships with an integrated braking chopper, so dynamic braking resistors can be added without an external chopper module. ## Duty ratings and thermal budget The normal-duty output current of 29 A at 4 kHz is the continuous rating for variable-torque loads like centrifugal pumps and fans. For constant-torque or high-starting-torque applications (conveyors, extruders), the heavy-duty rating of 24 A at 4 kHz applies, with a 150% overload capability for 60 seconds typical of the ATV900 family. The drive is rated for installation up to 1000 m altitude without derating. Above that, derate output current by 1% per 100 m up to 4800 m. The IP21 enclosure and UL type 1 rating mean it is suitable for indoor, non-washdown environments — plan for clean, dry panel or wall-mount installation with the vertical orientation within ±10°. ## Communication and I/O flexibility The ATV930D22Y6 comes with embedded Modbus serial, Modbus TCP, and EtherNet/IP ports. The Ethernet port supports half/full duplex and auto-negotiation at 10 or 100 Mbits. For fieldbus-specific networks, slot A accepts optional communication modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (RJ45 or SUB-D 9), and Ethernet Powerlink. Three expansion slots (A, B, C) accept digital/analog I/O extension modules and output relay modules. Slot B also supports encoder interface modules (digital 5/12 V, analog, or resolver) for closed-loop speed or position control. The built-in adjustable PID regulator handles process loops without an external controller. The drive carries CE marking and complies with UL 508C, IEC 61800-3 (EMC environment), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic limits), IEC 60721-3 (environmental classification), IEC 61508, and IEC 13849-1 (functional safety). The integrated EMC filter meets conducted emission limits for most industrial installations, with an optional EMC plate for higher performance. Environmental resistance is rated class 3C3 for chemical pollution and 3S3 for dust pollution per IEC 60721-3-3.","metaTitle":"Schneider Electric ATV930D22Y6 AC Drive, 500-690 V, 29 A","metaDescription":"Schneider Electric ATV930D22Y6 Altivar Process drive, 500-690 V 3-phase input, 29 A output, 18.5 kW normal duty. UL 508C, IEC 61800-5-1.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"Phase":"3 phase","title":"ATV930D22Y6","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22276","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"58 dB","description":"variable speed drive, Altivar Process ATV900, ATV930, 22kW, 30hp, 500 to 690V, IP00","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"18.5 kW normal duty 15.0 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Motor screw terminal 10 mm² AWG 8 Line side screw terminal 10 mm² AWG 8 DC bus screw terminal 10 mm² AWG 8","Nbr. of units in pkg.":"1","Volume of cooling air":"87178.3 Gal/hr(US) (330 m3/h)","Nominal Output Current":"29.0 A","IP degree of protection":"IP21","Continuous output current":"29 A 4 kHz normal duty 24 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"500...690 V","Communication Port Protocol":"Modbus serial Modbus TCP EtherNet/IP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5,370.00 – $6,810.64","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/ATV930D22Y6/variable-speed-drive-altivar-process-atv900-atv930-22kw-30hp-500-to-690v-ip00/"},"ai":{"faq":[{"question":"What motor power does the ATV930D22Y6 support?","answer":"The drive supports 18.5 kW in normal duty and 15.0 kW in heavy duty, with corresponding output currents of 29 A and 24 A respectively at 4 kHz carrier frequency."},{"question":"What communication protocols are available on the ATV930D22Y6?","answer":"Embedded protocols include Modbus serial, Modbus TCP, and EtherNet/IP. Optional slot-A modules add Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, or Ethernet Powerlink."},{"question":"How can I order the ATV930D22Y6 or get a quote?","answer":"The ATV930D22Y6 is quoted to order against the BOM quantity through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D22Y6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D22Y6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}