{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D37M3","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D37M3","canonicalUrl":"https://aoctrl.com/schneider/ATV930D37M3","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D37M3","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930D37M3 variable speed drive, 37.0 kW normal duty / 30.0 kW heavy duty, 200-240 V AC 3-phase input, 149 A nominal output current, IP21, UL Type 1 enclosure, integrated braking chopper.","salesMarkdown":"## 37 kW on 240 V — the power stage The ATV930D37M3 is a 37.0 kW normal-duty drive fed from a 200–240 V three-phase supply, with a 30.0 kW heavy-duty rating for the same input. At 149 A continuous output (normal duty, 2.5 kHz switching), it handles the full-load current of a 37 kW motor without derating the carrier frequency down to the minimum. The integrated braking chopper means you don't need an external braking module for deceleration loads — the DC bus is already tapped for a resistor. Standard variant with the chopper, not an option card. ## Fieldbus, I/O, and control wiring Communication comes standard with Modbus serial, Modbus TCP, and EtherNet/IP on board. Slot A accepts a Profibus DP V1, PROFINET, DeviceNet, EtherCAT, or CANopen module — the drive ships with the base ports populated and the slot ready for the network your line runs. Control wiring lands on screw terminals accepting 0.5–1.5 mm² (AWG 20–16). The digital inputs need an external 24 V DC supply (19–30 V range), while the internal 10.5 V DC reference powers a 1–10 kΩ speed pot. The STO (Safe Torque Off) circuit also takes 24 V DC from the internal supply, so the safety loop is self-contained within the drive's own power rail. Motor and line power terminals are sized for 70–120 mm² (AWG 2/0–250 kcmil) on the line side and 95–120 mm² (AWG 3/0–250 kcmil) on the motor side — lug selection matters for the 149 A continuous current. ## Enclosure, environment, and compliance IP21 with UL Type 1 rating — suitable for indoor, non-washdown environments where the drive is wall-mounted vertically (within ±10°). The integrated EMC filter meets IEC 61800-3 conducted emissions limits with an optional EMC plate for radiated compliance. Rated for pollution degree 2, overvoltage category III, and vibration per IEC 60068-2-6 (1.5 mm peak-to-peak at 2–13 Hz, 1 gn at 13–200 Hz). Shock tested to 15 gn for 11 ms. Operating altitude up to 1000 m without derating; above that, derate 1 % per 100 m to 4800 m. Compliance covers UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonics), IEC 61508 (functional safety), and IEC 13849-1 (PL). The THDI is below 48 % from 80–100 % load per IEC 61000-3-12, which helps when sizing upstream transformers and generators.","metaTitle":"Schneider ATV930D37M3 Altivar Process Drive, 37 kW","metaDescription":"Schneider Electric ATV930D37M3 variable speed drive, 37 kW normal duty, 200-240 V 3-phase input, 149 A output. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 240V"],"specifications":{"Phase":"3 phase","title":"ATV930D37M3","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"68.3 dB","description":"variable speed drive, Altivar Process ATV900, ATV930, 37kW, 200 to 240V, with braking unit, IP21","Maximum THDI":"<48 % from 80...100 % of load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"37.0 kW normal duty 30.0 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Motor screw terminal 95...120 mm² AWG 3/0...250 kcmil Line side screw terminal 70...120 mm² AWG 2/0...250 kcmil DC bus screw terminal 70...120 mm² AWG 2/0...250 kcmil","Nbr. of units in pkg.":"1","Volume of cooling air":"77932.2 Gal/hr(US) (295 m3/h)","Nominal Output Current":"149.0 A","IP degree of protection":"IP21","Continuous output current":"149 A 2.5 kHz normal duty 123 A 2.5 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"200...240 V","Communication Port Protocol":"Modbus serial Modbus TCP EtherNet/IP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/ATV930D37M3/variable-speed-drive-altivar-process-atv900-atv930-37kw-200-to-240v-with-braking-unit-ip21/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D37M3","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D37M3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}