{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930D90N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930D90N4","canonicalUrl":"https://aoctrl.com/schneider/ATV930D90N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930D90N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930D90N4 variable speed drive, 380-480 V 3-phase, 90 kW normal duty / 75 kW heavy duty, 173 A continuous output, IP21, with integrated braking chopper.","salesMarkdown":"## Drive ratings and duty selection The ATV930D90N4 is a 380-480 V 3-phase input variable speed drive from the Altivar Process ATV900 series, rated for 90.0 kW normal duty and 75.0 kW heavy duty. Continuous output current is 173 A at 2.5 kHz switching for normal duty, and 145 A at 2.5 kHz for heavy duty — the heavy-duty figure governs applications with sustained overload, such as crushers or extruders. The drive includes a built-in braking chopper as standard, which simplifies deceleration control for high-inertia loads without an external braking module. ## Control supply and fieldbus architecture Digital inputs require an external 24 V DC supply (19-30 V range), while the drive provides an internal 10.5 V DC reference for a 1-10 kOhm potentiometer and a separate 24 V DC supply for digital inputs and Safe Torque Off (STO) function. Communication ports support EtherNet/IP, Modbus serial, and Modbus TCP natively; option modules for PROFIBUS DP V1, PROFINET, DeviceNet, EtherCAT, and CANopen fit into Slot A. The Ethernet port runs at 10/100 Mbits with half/full duplex and autonegotiation, while the serial line supports 4.8 kbps, 9600 bit/s, and 19200 bit/s. ## Environmental and installation constraints Wall-mount enclosure rated IP21 / UL type 1, with an operating position vertical ±10 degrees — plan for adequate clearance above and below for the 295 m³/h cooling airflow. Vibration resistance is 1.5 mm peak-to-peak at 2-13 Hz and 1 gn at 13-200 Hz; shock resistance is 15 gn for 11 ms — both per IEC 60068-2-6 and IEC 60068-2-27 respectively. ## Compliance and lifecycle position The drive carries CE marking and complies with UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic), IEC 60721-3 (environmental), IEC 61508, and IEC 13849-1 (functional safety). Total harmonic current distortion (THDI) is below 48 % from 80-100 % load per IEC 61000-3-12, aided by the integrated EMC filter.","metaTitle":"Schneider Electric ATV930D90N4 Altivar Process VFD, 90 kW ND","metaDescription":"Schneider Electric ATV930D90N4 AC drive, 380-480 V 3-phase, 90 kW normal duty / 75 kW heavy duty, 173 A output, IP21, with braking chopper.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"68.3 dB","Maximum THDI":"<48 % from 80...100 % of load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"90.0 kW normal duty 75.0 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Synchronous motors Asynchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 120 mm² AWG 4/0...250 kcmil Motor screw terminal 120 mm² 250 kcmil DC bus screw terminal 95...120 mm² AWG 3/0...250 kcmil","Nbr. of units in pkg.":"1","Volume of cooling air":"77932.2 Gal/hr(US) (295 m3/h)","Nominal Output Current":"173.0 A","IP degree of protection":"IP21","Continuous output current":"173 A 2.5 kHz normal duty 145 A 2.5 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"EtherNet/IP Modbus serial Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,286.00","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV930D90N4/variable-speed-drive-altivar-process-atv900-atv930-90kw-400-to-480v-with-braking-unit-ip21/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV930D90N4/alternatives.json"},"ai":{"faq":[{"question":"What motor types does the ATV930D90N4 support?","answer":"It is designed for both synchronous and asynchronous motors, covering the majority of industrial AC motor applications from induction machines to permanent-magnet synchronous motors."},{"question":"How is the ATV930D90N4 quoted for volume purchases?","answer":"This drive is sourced to order through independent distribution channels. Availability and volume pricing are confirmed at the time of RFQ against the specific BOM quantity."},{"question":"What compliance documentation does Schneider Electric provide for the ATV930D90N4?","answer":"The drive carries CE marking and is certified to UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. Documentation includes the declaration of conformity and the relevant test reports."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930D90N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930D90N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}