{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930U07N4","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930U07N4","canonicalUrl":"https://aoctrl.com/schneider/ATV930U07N4","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930U07N4","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930U07N4, variable speed drive, 0.75 kW normal duty, 380...480 V 3-phase, 2.2 A output, IP21, with braking chopper.","salesMarkdown":"## Drive fit and lifecycle The Schneider Electric ATV930U07N4 is an Altivar Process ATV900 variable speed drive rated for 0.75 kW normal duty / 0.37 kW heavy duty asynchronous or synchronous motors on a 380...480 V three-phase supply. Continuous output current is 2.2 A at 4 kHz for normal duty, 1.5 A at 4 kHz for heavy duty. The variant includes an integrated braking chopper, so deceleration energy can be dumped into an external resistor rather than relying on DC injection alone. ## Compliance and power interface CE marked, with UL 508C and IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. Power input: 380-480 V three-phase. Control supply is dual: an external 24 V DC (19-30 V) for digital inputs, plus an internal 24 V DC (21-27 V) for STO and digital inputs. An internal 10.5 V DC reference supply is available for a 1-10 kOhm potentiometer. Insulation test at 500 V DC, 1 MOhm for 1 minute to earth. ## Mechanical and mounting Wall mount, vertical +/-10 degrees. IP21, UL type 1 enclosure — cabinet-mount only, not for washdown. Control screw terminals accept 0.5-1.5 mm² (AWG 20-16); power terminals (line, motor, DC bus) accept 2.5-6 mm² (AWG 14-10). Cooling air volume 38 m³/h, noise level 54.5 dB. Vibration resistance 1.5 mm peak at 2-13 Hz, 1 gn at 13-200 Hz per IEC 60068-2-6. Shock 15 gn, 11 ms per IEC 60068-2-27. Operating altitude 1000-4800 m with 1% derating per 100 m above 1000 m. ## Communications and expansion Built-in Modbus TCP, EtherNet/IP, and Modbus serial. Slot A accepts optional Profibus DP V1, PROFINET, DeviceNet, EtherCAT, or CANopen modules. Slot B and slot C allow I/O and relay expansion. Data rates up to 100 Mbits, also 9600/19200 bit/s for serial. Support for half/full duplex, auto-negotiation on Ethernet lines.","metaTitle":"Schneider ATV930U07N4 Altivar Process Drive, 0.75kW, 380-480","metaDescription":"Active production drive for 0.75kW motors, 380-480V 3-phase, 2.2A output. Integrated EMC filter, braking chopper, IP21. RFQ for lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"3 phase","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22276","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"54.5 dB","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"0.75 kW normal duty 0.37 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 2.5...6 mm² AWG 14...AWG 10 Motor screw terminal 2.5...6 mm² AWG 14...AWG 10 DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"10038.7 Gal/hr(US) (38 m3/h)","Nominal Output Current":"2.2 A","IP degree of protection":"IP21","Continuous output current":"2.2 A 4 kHz normal duty 1.5 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"Modbus TCP EtherNet/IP Modbus serial","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$506.73","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c48cf12f3c9521480f983584fe8cd32a.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV930U07N4/alternatives.json"},"ai":{"faq":[{"question":"What are the supply voltage and phase requirements?","answer":"The drive requires a 380-480 V three-phase supply. Control logic can be powered externally or internally as noted in the supply spec: external 24 V DC (19-30 V) for digital inputs, internal 24 V DC (21-27 V) for STO, plus a 10.5 V DC reference for a potentiometer."},{"question":"What compliance documentation does this drive have?","answer":"The drive is CE marked and complies with UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1."},{"question":"What is the output current and motor power rating?","answer":"Normal duty: 2.2 A at 4 kHz for 0.75 kW motors. Heavy duty: 1.5 A at 4 kHz for 0.37 kW motors."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930U07N4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930U07N4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}