{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930U07N4US","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930U07N4US","canonicalUrl":"https://aoctrl.com/schneider/ATV930U07N4US","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930U07N4US","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV930U07N4US, 0.75 kW normal duty, 380-480 V 3-phase, 2.2 A output, with braking chopper and integrated EMC filter.","salesMarkdown":"The Schneider Electric ATV930U07N4US Altivar Process ATV900 variable speed drive is rated 0.75 kW normal duty / 0.37 kW heavy duty on a 380-480 V 3-phase supply, with a continuous output current of 2.2 A at 4 kHz normal duty (1.5 A at 4 kHz heavy duty). Braking chopper is built in; integrated EMC filter covers the common-mode range. IP21 / UL Type 1 enclosure suits clean, dry environments – no extra gland plate needed for basic install. Control supply requires an external 24 V DC (19-30 V) for digital inputs; internal rails provide 10.5 V ±5 % for a reference potentiometer and 24 V (21-27 V) for digital inputs and STO. Isolation test at 500 V DC to earth. Communication slots accept Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (daisy chain or screw terminals), or Ethernet Powerlink modules – no fieldbus is fixed at the factory. Wall-mounted, vertical ±10 °. Pollution degree 2, relative humidity 5-95 % non-condensing. Altitude derating: full rated current up to 1000 m, then 1 % derating per 100 m above that. Vibration resistance: 1.5 mm pp at 2-13 Hz, 1 gn at 13-200 Hz per IEC 60068-2-6. Shock: 15 gn for 11 ms. Cooling air volume ~38 m³/h. Power and motor terminals: screw clamp, 2.5-6 mm² (AWG 14-10). Control terminals: 0.5-1.5 mm² (AWG 20-16). DC bus terminals same as motor side – handy for shared DC bus or external braking resistor if the internal chopper isn't enough for high-inertia stops.","metaTitle":"Schneider ATV930U07N4US Altivar Process 0.75 kW Drive","metaDescription":"0.75 kW normal duty / 0.37 kW HD, 380-480 V 3-phase, 2.2 A output, integrated EMC filter and braking chopper, IP21. Current production, UL & IEC listed.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","title":"ATV930U07N4US","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"54.5 dB","description":"Variable Speed Drive, Altivar Process ATV900, ATV930, 0.75kW, 400 to 480V, with braking unit, IP21 [TAA, BAA, BABA]","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"0.75 kW normal duty 0.37 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Compliance/Compliance":"TAA BAA BABA BAA via COTS","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 2.5...6 mm² AWG 14...AWG 10 Motor screw terminal 2.5...6 mm² AWG 14...AWG 10 DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"10038.7 Gal/hr(US) (38 m3/h)","Nominal Output Current":"2.2 A","IP degree of protection":"IP21","Continuous output current":"2.2 A 4 kHz normal duty 1.5 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"Modbus TCP EtherNet/IP Modbus serial","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,619.96","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4b8d355e65b3fcc1f03ae31b6670201e.pdf","sourceUrl":"https://www.se.com/us/en/product/ATV930U07N4US/variable-speed-drive-altivar-process-atv900-atv930-0-75kw-400-to-480v-with-braking-unit-ip21-taa-baa-baba/"},"ai":{"faq":[{"question":"What is the supply voltage and phase?","answer":"380-480 V AC, three-phase."},{"question":"What control supply does it need?","answer":"External 24 V DC (19-30 V) for digital inputs; internal 10.5 V for potentiometer; internal 24 V for digital inputs and STO. Insulation test 500 V DC to earth."},{"question":"What compliance standards does it meet?","answer":"UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, CE, and TAA/BAA."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930U07N4US","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930U07N4US when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}