{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930U30N4US","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930U30N4US","canonicalUrl":"https://aoctrl.com/schneider/ATV930U30N4US","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930U30N4US","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, ATV930U30N4US variable speed drive, 3-phase 380-480 V, 3.0 kW normal duty / 2.2 kW heavy duty, 7.2 A output, IP21, UL type 1, with braking chopper, integrated EMC filter.","salesMarkdown":"## Drive class and supply fit The ATV930U30N4US is a variable speed drive from the Altivar Process ATV900 series, designed for asynchronous and synchronous motors. It accepts a 3-phase 380-480 V supply and delivers 7.2 A continuous output at 4 kHz carrier in normal duty, or 5.6 A in heavy duty. Motor power rating is 3.0 kW normal duty and 2.2 kW heavy duty — the heavy-duty figure governs applications with constant-torque loads like conveyors or extruders, while normal duty suits variable-torque pumps and fans. ## Network topology and option slots The drive ships with integrated Ethernet IP and Modbus TCP supporting half-duplex, full-duplex, and autonegotiation at 10/100 Mbits. For deterministic motion or existing fieldbus backbones, Slot A accepts Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (daisy chain RJ45, SUB-D 9, or screw terminals), or Ethernet Powerlink modules. Additional I/O and encoder feedback modules populate Slot A, B, or C — including digital/analog I/O extension, output relay extension, and encoder interfaces for 5/12 V digital, analog, or resolver types. This lets the drive serve as a motion controller without a separate PLC for simple positioning axes. ## Enclosure, cooling, and environment IP21 protection and UL type 1 enclosure suit indoor panel mounting in clean environments — not washdown. The wall-mount design requires vertical orientation within ±10 degrees and draws 38 m³/h (10038.7 Gal/hr US) of cooling air. Ambient humidity range is 5-95% non-condensing per IEC 60068-2-3. Vibration resistance is 1.5 mm peak-to-peak at 2-13 Hz and 1 gn at 13-200 Hz per IEC 60068-2-6; shock resistance is 15 gn for 11 ms per IEC 60068-2-27. Altitude derating applies above 1000 m — 1% current reduction per 100 m up to 4800 m. ## Regulatory and compliance scope The drive carries CE marking and complies with UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic), IEC 60721-3 (environmental), IEC 61508 (functional safety), and IEC 13849-1. It is TAA/BAA/BABA compliant via COTS — relevant for US federal procurement. Integrated EMC filter meets conducted emission limits for most industrial installations; an optional EMC plate is available for higher-performance filtering. The braking chopper is included as standard — external resistor sized for the deceleration duty cycle prevents DC-bus overvoltage on fast stops. ## Sourcing and lifecycle position No official successor or pin-compatible alternative exists within the Altivar Process family at this power rating. The drive uses screw terminals for line (2.5-6 mm² / AWG 14-10), motor (2.5-6 mm²), DC bus (2.5-6 mm²), and control (0.5-1.5 mm² / AWG 20-16) connections.","metaTitle":"Schneider Electric ATV930U30N4US Altivar Process 900 VFD","metaDescription":"ATV930U30N4US variable speed drive, 3-phase 380-480 V, 3.0 kW normal duty, 7.2 A output, IP21, with braking chopper, integrated EMC filter.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Phase":"3 phase","title":"ATV930U30N4US","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"With braking chopper Standard version","Category":"US1CP4E22277","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"54.5 dB","description":"Variable Speed Drive, Altivar Process ATV900, ATV930, 3kW, 400 to 480V, with braking unit, IP21 [TAA, BAA, BABA]","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"3.0 kW normal duty 2.2 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Compliance/Compliance":"TAA BAA BABA BAA via COTS","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 2.5...6 mm² AWG 14...AWG 10 Motor screw terminal 2.5...6 mm² AWG 14...AWG 10 DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"10038.7 Gal/hr(US) (38 m3/h)","Nominal Output Current":"7.2 A","IP degree of protection":"IP21","Continuous output current":"7.2 A 4 kHz normal duty 5.6 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"380...480 V","Communication Port Protocol":"Modbus serial EtherNet/IP Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,085.68","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/938911539a6d750091aa2fccf7d7d3b9.pdf","sourceUrl":"https://www.se.com/us/en/product/ATV930U30N4US/variable-speed-drive-altivar-process-atv900-atv930-3kw-400-to-480v-with-braking-unit-ip21-taa-baa-baba/"},"ai":{"faq":[{"question":"What fieldbus protocols does ATV930U30N4US support natively and via options?","answer":"The drive has integrated Ethernet IP and Modbus TCP. Slot A accepts optional modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (three connector variants), and Ethernet Powerlink."},{"question":"What is the difference between normal duty and heavy duty ratings on this drive?","answer":"Normal duty delivers 3.0 kW at 7.2 A for variable-torque loads like pumps and fans. Heavy duty delivers 2.2 kW at 5.6 A for constant-torque loads like conveyors or extruders, with higher overload margin."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930U30N4US","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930U30N4US when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}