{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930U40M3","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930U40M3","canonicalUrl":"https://aoctrl.com/schneider/ATV930U40M3","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930U40M3","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Altivar Process ATV930U40M3, 200-240 V 3-phase, normal duty 4.0 kW / heavy duty 3.0 kW, 18.7 A, with braking chopper, IP21.","salesMarkdown":"## Drive at a glance The ATV930U40M3 is a current-production Altivar Process drive sized for a 4.0 kW motor in normal duty or 3.0 kW in heavy duty, running on 200-240 V three-phase supply. Standard fit includes a braking chopper and an integrated EMC filter. IP21 enclosure with UL Type 1 rating covers most indoor panel applications. ## Ratings and capacity Continuous output current is 18.7 A at 4 kHz for normal duty, dropping to 13.7 A for heavy-duty cycles. Motor power is 4.0 kW normal / 3.0 kW heavy, which means a standard 4 kW induction motor on a pump or fan runs comfortably; the heavy-duty rating covers constant-torque loads like conveyors. Supply voltage tolerance is 200-240 V ±10%, and overvoltage category III holds up on distribution panels. Built-in PID regulator allows direct process-loop control without an external controller. The braking chopper is rated for the drive's continuous output, so vertical loads or quick stops need only an external resistor – no chopper module to add later. Communication comes standard with Modbus serial, Modbus TCP, and EtherNet/IP at 10/100 Mbits, plus a slot for optional Profibus DP, PROFINET, DeviceNet, EtherCAT, or CANopen modules. Serial link runs at 9600, 19200 bps; factory default is 19200 8N1. ## Compliance and environment Designed to UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic), IEC 60721-3 (environmental), and functional safety per IEC 61508 and IEC 13849-1. Pollution degree 2, vibration 1.5 mm at 2-13 Hz / 1 gn at 13-200 Hz, shock 15 gn / 11 ms. Altitude derating: 1% per 100 m above 1000 m up to 4800 m.","metaTitle":"Schneider ATV930U40M3 Altivar Process Drive, 4.0 kW, 200-240","metaDescription":"Schneider ATV930U40M3 variable speed drive, 200-240V 3-phase, 4.0 kW normal duty, 18.7 A, IP21, with braking chopper and integrated EMC filter. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"3 phase","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Marking":"CE","Variant":"Standard version With braking chopper","Category":"US1CP4E22276","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"54.5 dB","Maximum THDI":"<48 % full load IEC 61000-3-12","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Motor power kW":"4.0 kW normal duty 3.0 kW heavy duty","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Asynchronous motors Synchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 4...6 mm² AWG 12...AWG 10 DC bus screw terminal 4...6 mm² AWG 12...AWG 10 Motor screw terminal 6 mm² AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"10038.7 Gal/hr(US) (38 m3/h)","Nominal Output Current":"18.7 A","IP degree of protection":"IP21","Continuous output current":"18.7 A 4 kHz normal duty 13.7 A 4 kHz heavy duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"200...240 V","Communication Port Protocol":"Modbus serial Modbus TCP EtherNet/IP","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,040.00 – $2,304.49","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c48cf12f3c9521480f983584fe8cd32a.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV930U40M3/alternatives.json"},"ai":{"faq":[{"question":"What motor power does this drive handle?","answer":"It handles 4.0 kW in normal duty (variable torque) and 3.0 kW in heavy duty (constant torque) on 200-240 V three-phase supply."},{"question":"What compliance certifications does it carry?","answer":"It carries CE marking and is designed to UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930U40M3","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930U40M3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}