{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV930U55S6X","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV930U55S6X","canonicalUrl":"https://aoctrl.com/schneider/ATV930U55S6X","factsUrl":"https://aoctrl.com/api/mcp/products/ATV930U55S6X","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900, ATV930U55S6X, variable speed drive, 3-phase 600 V, 9.5 A normal duty, with braking chopper, IP21","salesMarkdown":"## Drive at a glance The ATV930U55S6X is a 3-phase 600 V variable speed drive from the Altivar Process ATV900 series, built for synchronous and asynchronous motors in process industrial applications. Continuous output current is 9.5 A at 4 kHz for normal duty, dropping to 7.2 A under heavy duty. The braking chopper is integrated, so no external resistor board is needed for dynamic braking on vertical loads or short decels. ## Power supply and control wiring Digital inputs and STO are powered internally at 24 V DC (21...27 V); the reference potentiometer gets 10.5 V DC from the drive. External 24 V DC is required for any additional digital I/O modules. Control terminals accept 0.5...1.5 mm² (AWG 20...16), line and motor terminals 6...10 mm² (AWG 10...8). Spring-clamp or screw type? The listing says screw terminals. Mount it vertically within ±10°, wall-mount only. Keep ambient below the rating — 5...95% relative humidity, non-condensing. ## EMC and compliance EMC filter is integrated; an optional EMC plate is available for higher performance. Compliance includes UL 508C (US), IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonics), IEC 60721-3 (environment), and functional safety standards IEC 61508 / IEC 13849-1. EtherNet/IP and Modbus TCP on board; Modbus serial as well. Auto-negotiation, 10/100 Mbit/s, half or full duplex. Slot A accepts Profibus, PROFINET, DeviceNet, EtherCAT, CANopen, or Ethernet Powerlink modules. Auxiliary slots B and C accept digital/analog I/O extension, relay output, or encoder interface modules (digital 5/12 V, analog, or resolver). Good flexibility for retrofit. Built-in PID regulator handles closed-loop process control without an external controller — setpoint via analog or serial link.","metaTitle":"Schneider ATV930U55S6X VSD, 600V 3-Phase, 9.5A","metaDescription":"ATV930U55S6X Altivar Process drive, 600V 3-phase, 9.5A normal duty, 7.2A heavy. Active production. UL, IEC compliant. Sourced to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"3 phase","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth","Variant":"Standard version With braking chopper","Category":"US1CP4E22276","Standards":"UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1","EMC filter":"Integrated With EMC plate option","Data format":"8 bits, configurable odd, even or no parity","Noise level":"56 dB","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting Mode":"Wall mount","Option Module":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module communication module Ethernet Powerlink","Assembly style":"Enclosed","Regulation loop":"Adjustable PID regulator","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Altivar Process ATV900","Shock resistance":"15 gn 11 ms IEC 60068-2-27","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission Rate":"10, 100 Mbits 4.8 kbps 9600 bit/s 19200 bit/s","Device Application":"Industrial Application","Operating altitude":"1000...4800 m with current derating 1 % per 100 m","Operating position":"Vertical +/- 10 degree","Number of addresses":"1...247","Product destination":"Synchronous motors Asynchronous motors","Degree of protection":"UL type 1","Overvoltage category":"III","Type of polarization":"No impedance","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Motor screw terminal 6...10 mm² AWG 10...AWG 8 Line side screw terminal 6 mm² AWG 10 DC bus screw terminal 6 mm² AWG 10","Nbr. of units in pkg.":"1","Volume of cooling air":"27210.2 Gal/hr(US) (103 m3/h)","Nominal Output Current":"9.5 A","IP degree of protection":"IP21","Continuous output current":"7.2 A 4 kHz heavy duty 9.5 A 4 kHz normal duty","Product or Component Type":"Variable speed drive","[Us] rated supply voltage":"600 V","Communication Port Protocol":"Modbus TCP EtherNet/IP Modbus serial","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Product Specific Application":"Process for industrial","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air transport temperature":"-40...158 °F (-40...70 °C)","Ambient Air Temperature for Storage":"-40...158 °F (-40...70 °C)","Ambient air temperature for operation":"5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)","Environmental class (during operation)":"Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3","Relative symmetric mains voltage tolerance":"10 %","Permitted relative humidity (during operation)":"Class 3K5 according to EN 60721-3","Relative symmetric network frequency tolerance":"5 %","Maximum acceleration under shock impact (during operation)":"150 m/s² at 11 ms","Maximum deflection under vibratory load (during operation)":"1.5 mm at 2...13 Hz","Maximum acceleration under vibrational stress (during operation)":"10 m/s² at 13...200 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,330.00 – $3,179.49","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c48cf12f3c9521480f983584fe8cd32a.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ATV930U55S6X/alternatives.json"},"ai":{"faq":[{"question":"What are the continuous output current ratings?","answer":"At 4 kHz switching frequency: 9.5 A for normal duty and 7.2 A for heavy duty."},{"question":"What supply voltage and phase does this drive require?","answer":"It operates on 600 V three-phase input. The drive is 3-phase rated."},{"question":"What compliance documents are available for this drive?","answer":"It meets UL 508C, IEC 61800-3/5-1, IEC 61000-3-12, IEC 60721-3, and functional safety standards IEC 61508 / IEC 13849-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV930U55S6X","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV930U55S6X when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}