{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV980C31Q4X1","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV980C31Q4X1","canonicalUrl":"https://aoctrl.com/schneider/ATV980C31Q4X1","factsUrl":"https://aoctrl.com/api/mcp/products/ATV980C31Q4X1","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, regenerative system ATV980, variable speed drive ATV980C31Q4X1, 380-415 V 3-phase, 315 to 250 kW, IP23, CE marked.","salesMarkdown":"The ATV980C31Q4X1 is a regenerative variable speed drive from the Altivar Process ATV900 family, built for asynchronous and synchronous motor control. It ships as a floor-standing compact enclosure with IP23 protection, rated for 380...415 V three-phase supply at 50/60 Hz. The unit includes the Spacial SF enclosure, graphical operating panel, main switch, line choke, dv/dt filter choke, and terminal blocks for mains and motor — essentially a pre-integrated drive cabinet ready for power wiring. The headline power range is 315 to 250 kW — that spread reflects the regenerative topology: the drive can handle a 315 kW motor in motoring mode, but the regenerative rating caps at 250 kW continuous. For a buyer sizing this into a BOM, the number that governs the real-world fit is the supply voltage band: 380...415 V -10...6 %. That is a 342 V minimum to 440 V maximum window. If your plant runs a 400 V nominal distribution with typical 5 % sag, you are inside the window. If you are on a 480 V system, this is not the variant. Total harmonic current distortion (THDI) is listed at <5 % at full load, conforming to IEEE 519. That is a genuine line-side spec — no external harmonic filter needed for most utility compliance checks. The drive already carries a line choke in the enclosure. Cooling is forced convection, so the enclosure intake and exhaust paths need clearance. The operating position is vertical ±10°, and derating starts above 40 °C ambient — 40...50 °C with a derating factor applied. No derating below 0 °C only if the optional enclosure heater is fitted. ## Integration notes Communication is handled via the embedded Modbus serial port plus EtherNet/IP and Modbus TCP on the same physical connector. No separate option card required for those protocols. Overvoltage category III on the supply side means it is rated for fixed-installation distribution-level transients — consistent with a floor-standing drive fed from a panel MCCB. Environmental resistance is specified to 3C3 (chemical), 3S3 (dust), and 3K3 (humidity) per IEC 60721-3-3. That puts it in the same class as drives intended for industrial halls with moderate airborne contaminants — not clean-room, not outdoor. The IP23 enclosure keeps out solid objects >12 mm and water spray up to 60° from vertical, but it is not hose-down rated. Altitude derating starts at 1000 m: 1 % current derating per 100 m up to 2000 m, then continues at the same rate through 4800 m for TT, TN, and IT earthing systems. For a installation at 1500 m, expect roughly 5 % current reduction from the nameplate rating.","metaTitle":"Schneider ATV980C31Q4X1 Altivar Process ATV980, 315-250kW, 4","metaDescription":"Active ATV980C31Q4X1 variable speed drive, 380-415V 3-phase, THDI <5% IEEE 519, IP23 floor-standing enclosure. Modbus/EtherNet/IP. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"title":"ATV980C31Q4X1","Marking":"CE","Standards":"IEC 60204-1 IEC 61800-3 IEC 61800-2 IEC 61800-5-1","description":"Variable speed drive, Altivar Process ATV900, Regenerative System ATV980, 315 to 250kW, 400V, with CE, IP23","Maximum THDI":"<5 % full load conforming to IEEE 519","Assembly style":"In floor-standing enclosure compact version","Output voltage":"1 MOhm 500 V DC for 1 minute to earth","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to IEC 61800-5-1","Range of product":"Altivar Process ATV900","Shock resistance":"4 gn for 11 ms conforming to IEC 60068-2-27 3M2 conforming to IEC 60721-3-3","Supply frequency":"50...60 Hz +/- 5 %","Device short name":"ATV980","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3","Operating altitude":"1000...2000 m with current derating 1 % per 100 m 2000...3800 m with current derating 1 % per 100 m for TT earthing system 2000...3800 m with current derating 1 % per 100 m for TN earthing system 2000...3800 m with current derating 1 % per 100 m for IT earthing system 3800...4800 m with current derating 1 % per 100 m for TT earthing system 3800...4800 m with current derating 1 % per 100 m for TN earthing system","Operating position":"Vertical +/- 10 degree","Provided equipment":"Enclosure Spacial SF Graphical operating panel in the enclosure door Frequency inverter Main switch Line choke Terminal block main supply Terminal block motor Dv/dt filter choke","Colour of enclosure":"Light grey (RAL 7035)","Product destination":"asynchronous motors synchronous motors","Overvoltage category":"III","Vibration resistance":"1.5 mm peak to peak (f= 3...20 Hz) conforming to IEC 60068-2-6 0.6 gn (f= 10...200 Hz) conforming to IEC 60068-2-6 3M3 conforming to IEC 60721-3-3 1.5 mm peak to peak (f= 3...10 Hz) conforming to IEC 60068-2-6","IP degree of protection":"IP23 conforming to IEC 61800-5-1","Network number of phases":"3 phases","Product or component type":"Variable speed drive","[Us] rated supply voltage":"380...415 V - 10...6 %","Communication port protocol":"Modbus serial EtherNet/IP Modbus TCP","Environmental characteristic":"Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 Humidity resistant class 3K3 conforming to IEC 60721-3-3","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air temperature for storage":"-25...70 °C","Ambient air temperature for operation":"-10...0 °C without derating (with option enclosure heating) 0...40 °C without derating 40...50 °C with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/203924b3af06eaf0b997c9b214cbf429.pdf","sourceUrl":"https://www.se.com/ae/en/product/ATV980C31Q4X1/variable-speed-drive-altivar-process-atv900-regenerative-system-atv980-315-to-250kw-400v-with-ce-ip23/"},"ai":{"faq":[{"question":"What compliance documentation does this drive carry?","answer":"The drive is CE marked and complies with IEC 60204-1, IEC 61800-3, IEC 61800-2, and IEC 61800-5-1. EMC immunity is tested to IEC 61000-4-2/3/4/5/6 at levels 3 and 4. Pollution degree 2 per IEC 61800-5-1."},{"question":"What are the key electrical ratings for this drive?","answer":"Supply voltage 380...415 V -10...6 %, three-phase, 50/60 Hz ±5 %. THDI <5 % at full load per IEEE 519. Overvoltage category III. Output insulation tested at 1 MOhm, 500 V DC for 1 minute to earth."},{"question":"What is included in the enclosure?","answer":"The Spacial SF enclosure comes with the graphical operating panel mounted in the door, the frequency inverter, main switch, line choke, dv/dt filter choke, and terminal blocks for mains and motor connections."},{"question":"What motor types does this drive support?","answer":"It is designed for both asynchronous (induction) and synchronous motors."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV980C31Q4X1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV980C31Q4X1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}