{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV980C35T4X1","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV980C35T4X1","canonicalUrl":"https://aoctrl.com/schneider/ATV980C35T4X1","factsUrl":"https://aoctrl.com/api/mcp/products/ATV980C35T4X1","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900, ATV980 Regenerative System, variable speed drive, 400/315 kW, 480 V, CE, IP23.","salesMarkdown":"The ATV980C35T4X1 is a variable speed drive from the Altivar Process ATV900 range, specifically the ATV980 regenerative system. It is designed for asynchronous and synchronous motors, delivering regenerative braking capability that recovers energy back to the line rather than dissipating it as heat. This makes it a fit for applications where deceleration cycles are frequent or where energy savings matter — conveyors, cranes, centrifuges, or any overhauling load. Rated for a 480 V three-phase supply, the drive comes in a floor-standing compact enclosure with IP23 protection. It includes a line choke, dv/dt filter choke, main switch, and a graphical operating panel mounted in the enclosure door — so the package arrives as a near-complete drive cabinet, not a bare chassis that needs panel-building around it. Cooling is forced convection, and the unit is rated for operation up to 40 °C without derating, with a derating factor applied between 40 and 50 °C. Above 1000 m altitude, current derating applies at 1 % per 100 m, and the drive supports installations up to 4800 m with appropriate earthing system considerations. The drive is rated for 480 V +/- 10 % supply and 50/60 Hz +/- 5 % line frequency. That covers the standard global industrial mains — 400 V, 460 V, and 480 V grids — without needing a transformer tap change. The 3-phase input is fixed; single-phase supply is not supported. Pollution degree 2 (non-conductive pollution, occasional condensation) is typical for a clean, dry industrial enclosure — no special conformal coating required for normal environments. Communication is native: EtherNet/IP, Modbus TCP, and Modbus serial are all on board. No option card needed for the most common industrial Ethernet and serial protocols. That folds into any modern PLC or BMS without a gateway hack. ## Installation and environmental notes Mount the enclosure vertically within +/- 10 degrees. Clearance for forced convection airflow is required — the drive relies on a fan, not passive convection, so side and top gaps per the installation manual must be respected. Not suitable for washdown areas or outdoor exposure without additional shelter. Environmental resistance is rated 3C3 (chemical), 3S3 (dust), and 3K3 (humidity) per IEC 60721-3-3. That covers most industrial indoor environments with moderate pollution and condensation cycles. The drive carries CE marking and complies with IEC 61800-3 (EMC for adjustable-speed drives), IEC 60204-1 (safety of machinery), IEC 61800-2 (rating and performance), and IEC 61800-5-1 (electrical safety). EMC immunity is tested to level 3 for electrostatic discharge, radiated RF, conducted RF, and surge, and level 4 for fast transients. Vibration resistance is rated 3M3 per IEC 60721-3-3, with 1.5 mm peak-to-peak at 3-20 Hz and 0.6 gn at 10-200 Hz. Shock resistance is 4 gn for 11 ms. These ratings are typical for floor-mounted industrial drives in most factory environments.","metaTitle":"ATV980C35T4X1 Altivar Process ATV980 Regenerative Drive, 480","metaDescription":"ATV980C35T4X1 variable speed drive, Altivar Process ATV900, ATV980 Regenerative System, 400/315 kW, 480 V, CE, IP23. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"title":"ATV980C35T4X1","Marking":"CE","Standards":"IEC 61800-3 IEC 60204-1 IEC 61800-2 IEC 61800-5-1","description":"Variable speed drive, Altivar Process ATV900, ATV980 Regenerative System, 400/315 kW, 480 V, CE, IP23","Assembly style":"In floor-standing enclosure compact version","Output voltage":"1 MOhm 500 V DC for 1 minute to earth","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to IEC 61800-5-1","Range of product":"Altivar Process ATV900","Shock resistance":"4 gn for 11 ms conforming to IEC 60068-2-27 3M2 conforming to IEC 60721-3-3","Supply frequency":"50...60 Hz +/- 5 %","Device short name":"ATV980","Relative humidity":"5...95 % without condensation conforming to IEC 60068-2-3","Operating altitude":"1000...2000 m with current derating 1 % per 100 m 2000...3800 m with current derating 1 % per 100 m for TT earthing system 2000...3800 m with current derating 1 % per 100 m for TN earthing system 2000...3800 m with current derating 1 % per 100 m for IT earthing system 3800...4800 m with current derating 1 % per 100 m for TT earthing system 3800...4800 m with current derating 1 % per 100 m for TN earthing system","Operating position":"Vertical +/- 10 degree","Provided equipment":"Enclosure Spacial SF Graphical operating panel in the enclosure door Frequency inverter Main switch Line choke Terminal block main supply Terminal block motor Dv/dt filter choke","Colour of enclosure":"Light grey (RAL 7035)","Product destination":"asynchronous motors synchronous motors","Overvoltage category":"III","Vibration resistance":"1.5 mm peak to peak (f= 3...20 Hz) conforming to IEC 60068-2-6 0.6 gn (f= 10...200 Hz) conforming to IEC 60068-2-6 3M3 conforming to IEC 60721-3-3","IP degree of protection":"IP23 conforming to IEC 61800-5-1","Network number of phases":"3 phases","Product or component type":"Variable speed drive","[Us] rated supply voltage":"480 V +/- 10 %","Communication port protocol":"EtherNet/IP Modbus TCP Modbus serial","Environmental characteristic":"Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 Humidity resistant class 3K3 conforming to IEC 60721-3-3","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Ambient air temperature for storage":"-25...70 °C","Ambient air temperature for operation":"-10...0 °C without derating (with option enclosure heating) 0...40 °C without derating 40...50 °C with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/13b851aff1398b9d8aa7083103ebec6e.pdf","sourceUrl":"https://www.se.com/ae/en/product/ATV980C35T4X1/variable-speed-drive-altivar-process-atv900-atv980-regenerative-system-400-315-kw-480-v-ce-ip23/"},"ai":{"faq":[{"question":"What communication protocols does this drive support?","answer":"It supports EtherNet/IP, Modbus TCP, and Modbus serial natively — no option card required for these protocols."},{"question":"What is the IP rating and enclosure type?","answer":"The drive is IP23 and comes in a floor-standing compact enclosure (light grey RAL 7035) with the operator panel, main switch, line choke, and dv/dt filter included."},{"question":"What standards does the ATV980C35T4X1 comply with?","answer":"It complies with IEC 61800-3, IEC 60204-1, IEC 61800-2, and IEC 61800-5-1, and carries CE marking."},{"question":"What is the operating temperature range?","answer":"It operates from 0 to 40 °C without derating, and 40 to 50 °C with derating. With optional enclosure heating, it can operate down to -10 °C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV980C35T4X1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV980C35T4X1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}