{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV9A0C63T6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV9A0C63T6","canonicalUrl":"https://aoctrl.com/schneider/ATV9A0C63T6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV9A0C63T6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900, modular variable speed drive, ATV9A0C63T6, 650 hp at 600 V normal duty, with integrated EMC filter C3 and STO SIL 3.","salesMarkdown":"## Drive selection memo for the ATV9A0C63T6 The Schneider ATV9A0C63T6 is a modular Altivar Process ATV900 drive rated 650 hp at 600 V normal duty or 550 hp heavy duty, with apparent power of 565 kVA normal duty. The duty distinction matters: normal duty suits variable-torque loads like pumps and fans; heavy duty applies to constant-torque or high-start-torque applications such as conveyors or extruders. Line current at 600 V normal duty is 544 A, heavy duty 464 A — size upstream fuses and contactors accordingly. An integrated EMC filter rated for 300 m cable according to IEC 61800-3 category C3 is included, eliminating the need for an external filter in most industrial installations. The switching frequency is adjustable from 2 to 4.9 kHz; expect derating above 4 kHz if continuous full load is required. STO (Safe Torque Off) to SIL 3 is built in, per IEC 61508 and IEC 13849-1. The drive also provides motor thermal protection, phase loss detection, and protection against overvoltage/undervoltage on the DC bus and line supply. ## Cabinet integration notes The drive is IP00 rated for integration into a cabinet achieving IP21 or IP54 per IEC 61800-5-1 and IEC 60529. Cabinet mount only — forced convection cooling requires unimpeded airflow and clearance above and below. Pollution degree 2 environment per IEC 61800-5-1. Line side connections use M10 studs; motor connections also M10 bars. Control wiring via removable screw terminals accepting 0.5 to 1.5 mm² (AWG 20 to 16). Prospective line short-circuit current is 50 kA. ## Communication and option board flexibility Communication is built around a modular option slot A accepting Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (daisy chain RJ45, SUB-D 9, or screw terminals). Slots A, B, and C also accept digital/analog I/O extension modules or output relay extensions. Slot B can also host a 5/12 V digital encoder interface, analog encoder interface, or resolver interface. Native Modbus serial (2-wire RS 485, RTU, up to 38.4 kbit/s) and Modbus TCP (10/100 Mbit/s half/full duplex) are standard — no bridge required.","metaTitle":"Schneider ATV9A0C63T6 Altivar Process ATV900, 650 hp","metaDescription":"ATV9A0C63T6 Altivar Process ATV900, 650 hp at 600 V normal duty, with integrated EMC filter C3 and STO SIL 3. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV9A0C63T6","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm at 500 V DC, 1 min","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"71 dB 86/188/EEC","Option card":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module","description":"Variable speed drive, Altivar Process ATV900, APM, single 600 V, 650 hp","Line current":"544.0 A 600 V normal duty) 464.0 A 600 V heavy duty)","Maximum THDI":"<48 % from 80...100 % of load","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"565.0 kVA at 600 V normal duty 482.0 kVA at 600 V heavy duty","Motor power hp":"650.0 hp at 600 V normal duty 550.0 hp at 600 V heavy duty","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 3.0 power module 200 kW 2 front cover","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV900","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz +/- 5 %","Device short name":"ATV9A0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"0...2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Adjustable Automatic whatever the load Not available in permanent magnet motor law Can be suppressed","Network number of phases":"3 phases","Continuous output current":"650.0 A at 2.5 kHz normal duty 520.0 A at 2.5 kHz heavy duty","Maximum transient current":"780.0 A 60 s normal duty) 780.0 A 60 s heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"600 V - 10...15 %","Communication port protocol":"EtherNet/IP Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Speed drive output frequency":"0.1...599 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Optimized torque mode Variable torque standard Constant torque standard","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.2 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV9A0C63T6/variable-speed-drive-altivar-process-atv900-apm-single-600-v-650-hp/"},"ai":{"faq":[{"question":"What communication option cards are available for Slot A?","answer":"Slot A accepts modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, and CANopen (with RJ45, SUB-D 9, or screw terminal variants)."},{"question":"What compliance standards does the drive meet?","answer":"IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and UL 61800-5-1. Marked CE."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV9A0C63T6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV9A0C63T6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}