{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV9A0C80T6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV9A0C80T6","canonicalUrl":"https://aoctrl.com/schneider/ATV9A0C80T6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV9A0C80T6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, modular drive, 800 hp at 600 V normal duty, 670 A line current, STO SIL3, integrated EMC filter C3.","salesMarkdown":"## 800 hp modular drive with STO SIL3 The ATV9A0C80T6: Normal duty line current is 670 A at 600 V; heavy duty drops to 547 A at 600 V – match the duty class to your load profile. Apparent power is 696 kVA normal duty, 568 kVA heavy duty. Prospective short-circuit current rating is 50 kA. Switching frequency is adjustable 2 to 4.9 kHz with a derating factor – plan for reduced current output at higher carrier frequencies. The drive handles both synchronous and asynchronous motors. Integrated EMC filter is category C3 per IEC 61800-3, good for 300 m shielded cable runs without an external filter. Total harmonic current distortion (THDI) stays below 48 % from 80 to 100 % load. ## Protection and safety coverage Additional protections cover the motor and drive: thermal, overcurrent, short-circuit, phase loss, overvoltage, undervoltage, overshoot, overspeed, and control circuit break. The drive complies with IEC 61800-3 (EMC), IEC 61800-5-1 (safety), UL 61800-5-1, and pollution degree 2. Vibration resistance: 1.5 mm peak-peak at 2-13 Hz, 0.5 gn at 13-200 Hz. Shock resistance: 4 gn for 11 ms. ## Communication and control interfaces Built-in Modbus serial (RS-485 2-wire, RTU, 1 to 247 addresses) at 4.8 to 38.4 kbit/s. Slot A accepts optional Profibus DP V1, PROFINET, DeviceNet, EtherCAT, or CANopen (RJ45, SUB-D 9, or screw terminals) communication modules. Ethernet IP/Modbus TCP at 10/100 Mbit/s supports half/full duplex and auto-negotiation. Slot B accepts encoder interface modules (digital 5/12 V, analog, or resolver). ## Mounting and cooling Cabinet mount with IP00 degree of protection; intended for integration into IP21 or IP54 cabinets per both IEC and UL standards. Cooling is forced convection. Ambient relative humidity 5 to 95 % non-condensing. Actively produced with current lifecycle stage. No end-of-life notification. Quote-to-ship lead time depends on quantity and configuration (control unit, power module, and front cover are included in the kit).","metaTitle":"ATV9A0C80T6 Altivar Process ATV900 Drive, 800 hp","metaDescription":"Active-production ATV900 drive rated 800 hp at 600 V normal duty, 670 A line current, STO SIL3, integrated EMC filter C3. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV9A0C80T6","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm at 500 V DC, 1 min","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"73 dB 86/188/EEC","Option card":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module","description":"Variable speed drive, Altivar Process ATV900, APM, single 600 V, 800 hp","Line current":"670.0 A 600 V normal duty) 547.0 A 600 V heavy duty)","Maximum THDI":"<48 % from 80...100 % of load","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"696.0 kVA at 600 V normal duty 568.0 kVA at 600 V heavy duty","Motor power hp":"800.0 hp at 600 V normal duty 650.0 hp at 600 V heavy duty","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 4.0 power module 200 kW 3 front cover","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV900","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz +/- 5 %","Device short name":"ATV9A0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"0...2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Adjustable Automatic whatever the load Not available in permanent magnet motor law Can be suppressed","Network number of phases":"3 phases","Continuous output current":"830.0 A at 2.5 kHz normal duty 650.0 A at 2.5 kHz heavy duty","Maximum transient current":"996.0 A 60 s normal duty) 975.0 A 60 s heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"600 V - 10...15 %","Communication port protocol":"EtherNet/IP Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Speed drive output frequency":"0.1...599 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Optimized torque mode Variable torque standard Constant torque standard","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.2 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV9A0C80T6/variable-speed-drive-altivar-process-atv900-apm-single-600-v-800-hp/"},"ai":{"faq":[{"question":"What communication options does this drive support?","answer":"Built-in Modbus serial plus slot A modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, or CANopen, and native Ethernet IP/Modbus TCP."},{"question":"What safety function is integrated?","answer":"Safe Torque Off (STO) rated SIL 3."},{"question":"What is the cable length rating of the integrated EMC filter?","answer":"Category C3 filter supports 300 m shielded cable runs per IEC 61800-3."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV9A0C80T6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV9A0C80T6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}