{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV9A0M12N6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV9A0M12N6","canonicalUrl":"https://aoctrl.com/schneider/ATV9A0M12N6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV9A0M12N6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Altivar Process ATV900 modular drive, ATV9A0M12N6, 800 kW at 600 V normal duty, heavy duty 710 kW, integrated EMC Category C3 filter, STO SIL3.","salesMarkdown":"The ATV9A0M12N6 is an active-production Altivar Process ATV900 drive rated for 800 kW at 600 V normal duty (710 kW heavy duty). It drives synchronous or asynchronous motors and ships as a modular version: control unit, power module, mounting kit, fuses, and front cover. The integrated EMC filter meets Category C3 for cable runs up to 984.3 ft (300 m) — no external filter needed for most industrial installations. That eliminates the external safety relay and simplifies wiring for emergency-stop circuits that need to hold takt time without added latency. This is a current-production unit (lifecycle stage: current). It carries CE marking and complies with IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonics), IEC 60721-3 (environmental conditions), IEC 61508 / IEC 13849-1 (functional safety), and UL 61800-5-1. No last-time-buy or obsolescence watch needed for new designs or spares. Prospective line short-circuit current is rated 50 kA, so the drive handles high-fault-capacity panels without external current-limiting fuses in most distributions. ## Integration notes Cabinet-mount design, IP00 enclosure intended for integration into IP21 or IP54 cabinets. Cooling is forced convection — plan for airflow clearance around the power module. Line-side connection uses M10 screw terminals; motor connections via M10 bars. Control wiring uses removable screw terminals accepting 0.5–1.5 mm² (AWG 20–16). Communication flexibility: on-board Modbus serial RS-485 (2-wire, RTU frame) and Ethernet IP/Modbus TCP at 10/100 Mbit/s. Slot A accepts plug-in modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, or CANopen (RJ45, SUB-D 9, or screw terminals). Slots A, B, and C also support digital/analog I/O and relay extension modules. Switching frequency is adjustable from 2 to 4.9 kHz with derating factor; fine for pump, fan, conveyor and general motor control. THDI stays below 48 % from 80 to 100 % load.","metaTitle":"Schneider ATV9A0M12N6 Altivar Process ATV900, 800 kW","metaDescription":"Active-production ATV9A0M12N6 supplies 800 kW at 600 V normal duty with integrated EMC Category C3 filter and STO SIL3 safety. Source to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV9A0M12N6","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm at 500 V DC, 1 min","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"75 dB 86/188/EEC","Option card":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module","description":"Variable speed drive, Altivar Process ATV900, APM, single 500 V, 800 kW","Line current":"1070.0 A 600 V normal duty) 954.0 A 600 V heavy duty)","Maximum THDI":"<48 % from 80...100 % of load","Exchange mode":"Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP","Mounting mode":"Cabinet mount","Apparent power":"927.0 kVA at 600 V normal duty 826.0 kVA at 600 V heavy duty","Motor power kW":"800.0 kW at 600 V normal duty 710.0 kW at 600 V heavy duty","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 6.0 power module 200 kW 5 front cover","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV900","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz +/- 5 %","Device short name":"ATV9A0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"0...2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Adjustable Automatic whatever the load Not available in permanent magnet motor law Can be suppressed","Network number of phases":"3 phases","Continuous output current":"1230.0 A at 2.5 kHz normal duty 1030.0 A at 2.5 kHz heavy duty","Maximum transient current":"1476.0 A 60 s normal duty) 1545.0 A 60 s heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"500 V - 10...15 %","Communication port protocol":"EtherNet/IP Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Speed drive output frequency":"0.1...599 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Optimized torque mode Variable torque standard Constant torque standard","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.2 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/th/en/product/ATV9A0M12N6/variable-speed-drive-altivar-process-atv900-apm-single-500-v-800-kw/"},"ai":{"faq":[{"question":"What are the key electrical ratings of this drive?","answer":"Motor power: 800 kW normal duty, 710 kW heavy duty at 600 V. Line current: 1070 A normal duty, 954 A heavy duty. Apparent power: 927 kVA normal duty, 826 kVA heavy duty. Switching frequency adjustable 2–4.9 kHz."},{"question":"What approvals does this drive carry?","answer":"CE marked. Complies with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and UL 61800-5-1."},{"question":"What are the supply voltage requirements for the control?","answer":"External 24 V DC (19–30 V) for digital inputs; internal 10.5 V DC ±5 % for a 1–10 kΩ reference potentiometer; internal 24 V DC (21–27 V) for digital inputs and STO circuit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV9A0M12N6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV9A0M12N6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}