{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV9B0C40T6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV9B0C40T6","canonicalUrl":"https://aoctrl.com/schneider/ATV9B0C40T6","factsUrl":"https://aoctrl.com/api/mcp/products/ATV9B0C40T6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process ATV900 series, ATV9B0C40T6 modular AC drive, 450 hp at 600 V normal duty, 350 hp heavy duty, forced convection cooling, cabinet mount, IP00 for IP21/IP54 integration.","salesMarkdown":"## 450 hp at 600 V — normal and heavy duty profiles The ATV9B0C40T6 is a modular Altivar Process ATV900 drive rated 450 hp at 600 V normal duty and 350 hp at 600 V heavy duty. The heavy-duty line current is 277 A versus 355 A for normal duty — the same drive handles a pump or fan at full nameplate or a crusher/conveyor at the lower derated figure. Apparent power tracks the duty: 369 kVA normal, 288 kVA heavy. The regenerative-mode ratings drop further to 237 kVA normal and 169 kVA heavy, which matters if the application decelerates a high-inertia load and needs to sink regenerated power back to the line. ## STO SIL 3 and integrated EMC filter The drive also integrates an EMC filter rated for 300 m cable runs to IEC 61800-3 category C3, which covers most industrial environments without an external filter. Total harmonic current distortion (THDI) stays below 5 % at full load per IEEE 519 — the active front-end or integrated line reactor handles the harmonics without an add-on filter in most utility grids. ## Fieldbus and I/O expansion slots The control unit carries two RJ45 ports for Ethernet IP/Modbus TCP and one RJ45 for Modbus serial, plus a 2-wire RS-485 physical interface. Slot A accepts Profibus DP V1, PROFINET, DeviceNet, CANopen, or EtherCAT communication modules; slots A/B/C also accept digital/analog I/O extension and relay output modules. Slot B supports a 5/12 V digital encoder interface, analog encoder interface, or resolver interface. Modbus serial runs at 4.8, 9.6, 19.2, or 38.4 kbit/s with RTU frame and configurable parity; Ethernet ports run at 10/100 Mbit/s. The drive supports 1–247 Modbus addresses.","metaTitle":"Schneider Electric ATV9B0C40T6 Altivar Process 900 AC Drive","metaDescription":"Schneider Electric ATV9B0C40T6 Altivar Process ATV900 AC Drive (VFD) rated 450 hp at 600 V normal duty. Active production, sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 600V"],"specifications":{"title":"ATV9B0C40T6","Supply":"External supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm at 500 V DC, 1 min","Marking":"CE","Variant":"Modular version","Standards":"IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1","EMC filter":"Integrated 984.3 ft (300 m) IEC 61800-3 category C3","Data format":"8 bits, configurable odd, even or no parity Modbus serial","Noise level":"73 dB 86/188/EEC","Option card":"Slot A communication module Profibus DP V1 Slot A communication module PROFINET Slot A communication module DeviceNet Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communication module CANopen screw terminals Slot A communication module EtherCAT Slot A/slot B/slot C digital and analog I/O extension module Slot A/slot B/slot C output relay extension module Slot B 5/12 V digital encoder interface module Slot B analog encoder interface module Slot B resolver encoder interface module","description":"Variable speed drive, Altivar Process ATV900, APM, Low Harmonic/Regen 600 V, 450 hp","Line current":"355.0 A 600 V normal duty) 277.0 A 600 V heavy duty) 228.0 A 600 V regenerative mode normal duty) 162.0 A 600 V regenerative mode heavy duty)","Maximum THDI":"<5 % full load IEEE 519","Mounting mode":"Cabinet mount","Apparent power":"369.0 kVA at 600 V normal duty 288.0 kVA at 600 V heavy duty 237.0 kVA at 600 V normal duty regenerative mode 169.0 kVA at 600 V heavy duty regenerative mode","Connector type":"2 RJ45 Ethernet IP/Modbus TCP on terminal 1 RJ45 Modbus serial on terminal","Motor power hp":"450.0 hp at 600 V normal duty 350.0 hp at 600 V heavy duty 350.0 hp at 600 V normal duty regenerative mode 250.0 hp at 600 V heavy duty regenerative mode","Kit composition":"1 control unit mechanical mounting kits power connection set of fuses 2.0 power module 200 kW 1 front cover","Protection type":"Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive","Safety function":"STO (safe torque off) SIL 3","Type of cooling":"Forced convection","lifecycle_stage":"current","Method of access":"Slave Modbus TCP","Pollution degree":"2 IEC 61800-5-1","Range of product":"Altivar Process ATV900","Shock resistance":"4 gn 11 ms IEC 60068-2-27","Supply frequency":"50...60 Hz +/- 5 %","Device short name":"ATV9B0","Relative humidity":"5...95 % without condensation IEC 60068-2-3","Transmission rate":"10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial","Operating altitude":"0...2000 m with current derating above 1000m","Physical interface":"2-wire RS 485 Modbus serial","Transmission frame":"RTU Modbus serial","Number of addresses":"1...247 Modbus serial","Product destination":"Synchronous motors Asynchronous motors","Switching frequency":"2...4.9 kHz adjustable with derating factor","Degree of protection":"UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)","Frequency resolution":"Display unit 0.1 Hz Analog input 0.012/50 Hz","Prospective line Isc":"50 kA","Type of polarization":"No impedance Modbus serial","Vibration resistance":"1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6","Electrical connection":"Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars","IP degree of protection":"IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529","Motor slip compensation":"Adjustable Automatic whatever the load Not available in permanent magnet motor law Can be suppressed","Network number of phases":"3 phases","Continuous output current":"425.0 A at 2.5 kHz normal duty 340.0 A at 2.5 kHz heavy duty 340.0 A at 2.5 kHz normal duty regenerative mode 275.0 A at 2.5 kHz heavy duty regenerative mode","Maximum transient current":"510.0 A 60 s normal duty) 510.0 A 60 s heavy duty) 408.0 A 60 s regenerative mode normal duty) 412.5 A 60 s regenerative mode heavy duty)","Product or component type":"Variable speed drive","[Us] rated supply voltage":"600 V - 10...15 %","Communication port protocol":"EtherNet/IP Modbus serial Modbus TCP","Nominal switching frequency":"2.5 kHz","Environmental characteristic":"Chemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3","Speed drive output frequency":"0.1...599 Hz","Electromagnetic compatibility":"Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6","Synchronous motor control profile":"Permanent magnet motor Synchronous reluctance motor","Asynchronous motor control profile":"Optimized torque mode Variable torque standard Constant torque standard","Acceleration and deceleration ramps":"Linear adjustable separately from 0.01...9999 s","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Permissible temporary current boost":"1.2 x In 60 s normal duty) 1.5 x In 60 s heavy duty)","Ambient air temperature for operation":"23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/ATV9B0C40T6/variable-speed-drive-altivar-process-atv900-apm-low-harmonic-regen-600-v-450-hp/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for ATV9B0C40T6?","answer":"The drive carries CE marking and complies with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and UL 61800-5-1. Documentation includes the standards declaration and the UL file — request the specific RoHS/REACH declarations at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV9B0C40T6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV9B0C40T6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}