{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH1533CF6D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH1533CF6D","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH1533CF6D","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH1533CF6D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LH1533CF6D, Lexium 18 servo motor with holding brake, 1.5 kW continuous power, 4.77 N.m nominal torque at 3000 rpm, IP67, 23-bit optical multi-turn absolute encoder, Asian standard flange 100 mm.","salesMarkdown":"## 1.5 kW at 3000 rpm — load-sizing anchor The BEH18LH1533CF6D delivers 1500 W continuous output power at 3000 rpm nominal speed on a three-phase 380 V supply, with a nominal torque of 4.77 N.m. The continuous stall torque matches the nominal torque at 4.77 N.m, meaning the motor holds rated torque at zero speed without overheating — useful for positioning applications that dwell under load. Peak stall torque reaches 14.31 N.m under the same 380 V three-phase supply, giving a 3:1 overload margin for acceleration and emergency stops. ## Holding brake — 8 N.m for vertical loads The integrated holding brake delivers 8 N.m of holding torque, which locks the rotor when power is removed. This is sized for vertical-axis or gravity-loaded applications where the load must not drift during a power loss or E-stop — typical for pick-and-place gantries, elevators, and Z-axis stages. ## 23-bit absolute encoder — position retention over multiple turns The optical multi-turn absolute encoder provides 23 bits of resolution, retaining shaft position across power cycles without requiring a home sequence on startup. This eliminates the homing routine on each power-up in applications where the machine must resume from the last commanded position — common in CNC tool changers and rotary indexing tables. The encoder is optical, not magnetic; optical types offer higher resolution and lower jitter at the cost of sensitivity to contamination. The IP67 rating on the motor body protects the encoder housing from washdown ingress. ## IP67 — washdown-ready enclosure Rated IP67, the motor body and connector interface are sealed against dust and temporary immersion. This suits food-and-beverage lines, car washes, or any area where the motor sees scheduled washdown with hoses or steam. The electrical connection uses two male/female connectors — the IP67 seal depends on the mating connector being properly torqued. The shaft end is a parallel key with 24 mm diameter and 45 mm shaft length, standard for coupling to gearboxes or pulleys. ## Active production — no obsolescence signal No official successor or cross-reference is recorded — this is the current variant in the Lexium 18 range. The Asian standard flange (100 mm mounting holes at 9 mm diameter) matches the common frame size for integration into existing machine designs.","metaTitle":"Schneider Electric BEH18LH1533CF6D Servo Motor with Brake","metaDescription":"Schneider Electric BEH18LH1533CF6D Lexium 18 servo motor with brake, 1.5 kW, 4.77 N.m, 3000 rpm, IP67, 23-bit absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"176 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH1533CF6D","Height":"144.5 mm","Length":"176 mm","Inertia":"3.5 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 380V,1.5kW,L100,23bit, OPT MT,brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"3000 rpm, 380 V, three phase","Rotor inertia":"3.5 kg.cm²","Holding torque":"8 N.m","Nominal torque":"4.77 N.m, 380 V, three phase","Product weight":"5.1 kg","Shaft diameter":"24 mm","Torque constant":"0.984 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1500 W","Mounting support":"Asian standard flange","Back emf constant":"65.28 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"14.31 N.m, 380 V, three phase","Maximum current Irms":"14.58 A at 1.5 kW, 380 V","Nominal output power":"1500 W, 380 V, three phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"4.77 N.m, 380 V, three phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"4.86 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Three phase","Number of mounting holes":"4","Maximum permanent current":"14.58 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"380 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c0c0d537c8bb96ae41c4da4841143edd.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH1533CF6D/beh18-servo-motor-lexium-18-380v1-5kwl10023bit-opt-mtbrake/"},"ai":{"faq":[{"question":"What is the holding brake torque on this motor?","answer":"The holding brake delivers 8 N.m of torque, sufficient to lock the rotor on power loss for vertical-axis or gravity-loaded applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH1533CF6D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH1533CF6D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}