{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH1533MA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH1533MA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH1533MA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH1533MA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 18 BEH18LH1533MA6C servo motor with brake, 1.5 kW, 4.77 N.m, 3000 rpm, IP67, 17-bit magnetic multiturn encoder, Asian standard flange.","salesMarkdown":"## Motor specs that set the motion loop The BEH18LH1533MA6C is a 1.5 kW servo motor from the Lexium 18 range, delivering 4.77 N.m nominal torque at 3000 rpm on a single-phase 220 V supply. The 17-bit magnetic multiturn encoder gives position feedback with 131,072 counts per revolution — enough resolution to hold a micron on a ball-screw axis if the drive tuning is tight. ## Brake, flange, and sealing — what fits where This variant includes a holding brake — the brake holds the load at standstill when the drive is disabled, critical for vertical axes or any application where the load must not drift after power-off. The brake is spring-applied, electrically released; the datasheet gives the holding torque and release voltage. The motor uses an Asian standard flange with a 100 mm flange size and four 9 mm mounting holes. The shaft is 24 mm diameter with a parallel key, 45 mm shaft length. IP67 rating means the motor body and the connector interface withstand washdown — suitable for food-and-bev lines or wet machining areas. ## Current, torque, and thermal limits Continuous stall torque is 4.77 N.m at 8.9 A. Peak stall torque hits 14.31 N.m — useful for acceleration bursts during rapid moves. The maximum current Irms is 26.7 A at 1.5 kW, which sets the drive's peak current requirement. Air-cooled — no fan, so the motor relies on natural convection; derate if mounted in a confined enclosure without airflow. Back EMF constant is 36.5 V/krpm at 40 °C. This limits the maximum speed at a given DC bus voltage — at 220 V bus, the motor reaches its 3000 rpm rated speed without field weakening. The 10-pole design keeps cogging torque low, which matters for smooth low-speed rotation.","metaTitle":"Schneider Electric BEH18LH1533MA6C Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18LH1533MA6C Lexium 18 servo motor with brake, 1.5 kW, 4.77 N.m nominal torque, 3000 rpm, IP67, 17-bit magnetic multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"147.4 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH1533MA6C","Height":"144.5 mm","Length":"147.4 mm","Inertia":"2.75 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 220V,1.5kW,L100,17bit MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without With","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"2.75 kg.cm²","Nominal torque":"4.77 N.m, 220 V, single phase","Product weight":"4.3 kg","Shaft diameter":"24 mm","Torque constant":"0.535 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1500 W","Mounting support":"Asian standard flange","Back emf constant":"36.5 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"14.31 N.m, 220 V, single phase","Maximum current Irms":"26.7 A at 1.5 kW, 220 V","Nominal output power":"1500 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"4.77 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"8.9 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Single phase","Number of mounting holes":"4","Maximum permanent current":"26.7 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/68489958f5a9265e440f124890fbd965.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH1533MA6C/beh18-servo-motor-lexium-18-220v1-5kwl10017bit-mag-mt/"},"ai":{"faq":[{"question":"What does the 17-bit magnetic multiturn encoder mean for positioning?","answer":"The 17-bit magnetic multiturn encoder provides 131,072 counts per revolution and tracks absolute position over multiple turns. This gives enough resolution for sub-micron positioning on a precision axis, and the magnetic sensing is immune to oil mist and vibration that would fog an optical encoder."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH1533MA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH1533MA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}