{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH1533MF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH1533MF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH1533MF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH1533MF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LH1533MF6C, Lexium 18 servo motor with brake, 1.5 kW, 3000 rpm, 4.77 Nm nominal torque, 17-bit magnetic multi-turn encoder, IP67, Asian standard flange 100 mm.","salesMarkdown":"The BEH18LH1533MF6C is a 1.5 kW servo motor from the Lexium 18 range, spinning at 3000 rpm nominal speed on single-phase 220 V supply. The 4.77 N.m nominal torque and 14.31 N.m peak stall torque define the acceleration headroom for a direct-drive or belt-coupled axis — the peak figure is what gets the load moving against inertia, not the continuous rating. The 17-bit magnetic multi-turn encoder gives 131,072 counts per revolution absolute position feedback, so the drive knows the rotor angle at power-up without a homing move. That matters on a vertical axis or a tool-changer where the machine must resume position after a power cycle without crashing. The holding brake is rated 8 N.m static torque — enough to hold a vertical load that the motor's 4.77 N.m continuous torque would otherwise back-drive when power is off. The brake releases electrically when the drive enables, so the axis is free to move under power. ## IP67, Asian flange, air-cooled — integration into a washdown or food-grade line IP67 protection means the motor body and the connector interface are sealed against dust ingress and temporary immersion — the motor can be hosed down on a food-processing or packaging line without water getting into the windings or encoder. The air-cooled surface design relies on free convection; no external fan or coolant lines to route. The Asian standard flange (100 mm square, 9 mm mounting holes) matches the common frame size used across the Lexium 18 family. The 24 mm shaft with parallel key and 45 mm shaft length takes a standard timing-belt pulley or coupling — no custom machining needed for most motion modules.","metaTitle":"Schneider Electric BEH18LH1533MF6C Servo Motor, 1.5 kW","metaDescription":"Schneider Electric BEH18LH1533MF6C Lexium 18 servo motor, 1.5 kW, 4.77 Nm nominal torque, 17-bit magnetic multi-turn encoder, holding brake, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"176 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH1533MF6C","Height":"144.5 mm","Length":"176 mm","Inertia":"3.5 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 220V,1.5kW,L100,17bit MAG MT,brake","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"With","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"3.5 kg.cm²","Holding torque":"8 N.m","Nominal torque":"4.77 N.m, 220 V, single phase","Product weight":"5.1 kg","Shaft diameter":"24 mm","Torque constant":"0.535 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"1500 W","Mounting support":"Asian standard flange","Back emf constant":"36.5 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"14.31 N.m, 220 V, single phase","Maximum current Irms":"26.7 A at 1.5 kW, 220 V","Nominal output power":"1500 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"4.77 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"8.9 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Single phase","Number of mounting holes":"4","Maximum permanent current":"26.7 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2e09b6b57a56b25fcb36f657b54c8fba.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH1533MF6C/beh18-servo-motor-lexium-18-220v1-5kwl10017bit-mag-mtbrake/"},"ai":{"faq":[{"question":"What is the BEH18LH1533MF6C's encoder resolution?","answer":"The motor uses a 17-bit magnetic multi-turn encoder, giving 131,072 counts per revolution absolute position feedback. This provides the drive with rotor position at power-up without a homing sequence."},{"question":"Does the BEH18LH1533MF6C include a holding brake?","answer":"Yes, the motor includes a holding brake rated at 8 N.m static torque. It holds vertical loads when power is off and releases electrically when the drive enables."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH1533MF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH1533MF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}