{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH2033CF6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH2033CF6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH2033CF6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH2033CF6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LH2033CF6C Lexium 18 servo motor with holding brake, 2 kW continuous power, 3000 rpm, 6.37 Nm continuous torque, 23-bit multi-turn optic encoder, IP67, Asian standard flange 100 mm.","salesMarkdown":"## Motion profile and torque margins The BEH18LH2033CF6C: Rated 2 kW continuous output at 220 V single-phase, with a nominal speed of 3000 rpm — this is the operating point for most direct-drive or low-ratio applications. Continuous stall torque is 6.37 Nm at the same voltage, and the peak stall torque reaches 19.11 Nm, giving a 3× overload margin for acceleration and deceleration cycles. ## Encoder feedback and holding brake A 23-bit multi-turn optic encoder provides absolute position feedback over 8192 revolutions — no homing cycle needed after a power loss on multi-turn applications. The optic encoder gives better accuracy and lower jitter than a magnetic resolver, but it is sensitive to contamination, so the IP67 sealing on the motor body and connector is essential in washdown or dusty environments. The integrated holding brake delivers 8 Nm holding torque — enough to hold a vertical axis load without power to the motor windings. This is a spring-set, electrically released brake; it engages when the drive enable drops or power is removed, preventing the load from drifting during standstill or emergency stop. ## Mechanical integration and environmental sealing Asian standard flange with 100 mm square mounting face and 9 mm mounting holes — common on machines built to Japanese or Chinese frame standards. The shaft is 24 mm diameter with a parallel keyway, 45 mm shaft length, and the 8 mm key width matches standard coupling bores.","metaTitle":"Schneider Electric BEH18LH2033CF6C Servo Motor with Brake","metaDescription":"Schneider Electric BEH18LH2033CF6C Lexium 18 servo motor with brake, 2 kW nominal power, 3000 rpm, 6.37 Nm continuous torque, 23-bit multi-turn encoder, IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"196 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH2033CF6C","Height":"144.5 mm","Length":"196 mm","Inertia":"4.4 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 220V,2.0kW,L100,23bit, OPT MT,brake","Encoder type":"Optic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"23 bits optic multi turn encoder","Holding brake":"With","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"4.4 kg.cm²","Holding torque":"8 N.m","Nominal torque":"6.37 N.m, 220 V, single phase","Product weight":"6.1 kg","Shaft diameter":"24 mm","Torque constant":"0.53 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2000 W","Mounting support":"Asian standard flange","Back emf constant":"36.4 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"19.11 N.m, 220 V, single phase","Maximum current Irms":"36 A at 2 kW, 220 V","Nominal output power":"2000 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"6.37 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"12 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Single phase","Number of mounting holes":"4","Maximum permanent current":"36 A","Product or component type":"Servo motor","Speed feedback resolution":"8388608 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d6f507246ee8324f188069377eb93e49.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH2033CF6C/beh18-servo-motor-lexium-18-220v2-0kwl10023bit-opt-mtbrake/"},"ai":{"faq":[{"question":"What is the continuous and peak torque of BEH18LH2033CF6C?","answer":"Continuous stall torque is 6.37 Nm at 220 V single-phase; peak stall torque is 19.11 Nm at the same voltage. The holding brake provides 8 Nm holding torque."},{"question":"What encoder type does BEH18LH2033CF6C use?","answer":"It uses a 23-bit multi-turn optic encoder — absolute position over 8192 revolutions, no homing required after power loss on multi-turn applications."},{"question":"What is the IP rating of BEH18LH2033CF6C?","answer":"IP67 — sealed against dust and temporary immersion, suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH2033CF6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH2033CF6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}