{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BEH18LH2033MA6C","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BEH18LH2033MA6C","canonicalUrl":"https://aoctrl.com/schneider/BEH18LH2033MA6C","factsUrl":"https://aoctrl.com/api/mcp/products/BEH18LH2033MA6C","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BEH18LH2033MA6C, Lexium 18 series servo motor, 2000 W continuous power, 6.37 N.m nominal torque, 3000 rpm, IP67, 17-bit magnetic multi-turn encoder, 100 mm flange, Asian standard, without brake.","salesMarkdown":"## 2 kW servo with 17-bit absolute feedback — the torque density fit The BEH18LH2033MA6C delivers 2000 W continuous power with 6.37 N.m nominal torque at 3000 rpm, single-phase 220 V input. That torque constant of 0.53 N.m/A at 40 °C means the drive needs to supply 12 A continuous stall current to hold position under full torque — size the drive's continuous current rating above this, not just the peak. Peak stall torque hits 19.11 N.m at 36 A — a 3× overload for acceleration transients. The drive's peak current capability must match this for the duty cycle; a drive rated for 150% overload for 3 seconds typically covers it, but confirm the drive's peak current ceiling against the 36 A maximum Irms. ## IP67 sealed body — washdown-ready without a secondary cover IP67 rating on both the housing and the connector interface means this motor survives hose-down cleaning in food or beverage lines without an add-on shroud. The 2-connector male/female electrical connection is sealed at the mating face — verify the cable gland torque spec on the mating cordset to maintain the IP67 boundary. Air-cooled with a 100 mm Asian-standard flange. The 167.4 mm depth and 144.5 mm height fit the B14 footprint common on Asian-sourced machinery — measure the existing bolt pattern against the 9 mm mounting holes on a 100 mm PCD before ordering. ## 17-bit multi-turn absolute encoder — no homing on power-up The 17-bit magnetic multi-turn encoder tracks absolute position over 131,072 counts per revolution and multiple shaft turns without battery backup. On a power cycle the drive knows the exact rotor position — no homing routine needed for axis re-initialisation. This eliminates the re-reference step after a line stoppage or emergency stop. The 10-pole motor design with a 24 mm parallel key shaft and 45 mm shaft length couples directly to most standard servo couplings. Maximum radial force is 686 N at the shaft centre — stay under this for belt-drive or overhung load applications to avoid bearing overload.","metaTitle":"Schneider Electric BEH18LH2033MA6C Lexium 18 Servo Motor","metaDescription":"Schneider Electric BEH18LH2033MA6C servo motor, 2 kW continuous power, 6.37 Nm nominal torque at 3000 rpm, IP67, 17-bit multi-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Depth":"167.4 mm","Range":"Lexium 18","Width":"100 mm","title":"BEH18LH2033MA6C","Height":"144.5 mm","Length":"167.4 mm","Inertia":"3.65 kg.cm²","Key width":"8 mm","Shaft end":"Parallel key","description":"BEH18 servo motor, Lexium 18, 220V,2.0kW,L100,17bit MAG MT","Encoder type":"Magnetic encoder","Second shaft":"Without second shaft end","Shaft length":"45 mm","Feedback type":"17 bits magnetic multi turn encoder","Holding brake":"Without","Nominal speed":"3000 rpm, 220 V, single phase","Rotor inertia":"3.65 kg.cm²","Nominal torque":"6.37 N.m, 220 V, single phase","Product weight":"5.3 kg","Shaft diameter":"24 mm","Torque constant":"0.53 N.m/A at 40 °C","Type of cooling":"Air-cooled","lifecycle_stage":"current","Continuous power":"2000 W","Mounting support":"Asian standard flange","Back emf constant":"36.4 V/krpm at 40 °C","Device short name":"BEH18","Motor flange size":"100 mm","Peak stall torque":"19.11 N.m, 220 V, single phase","Maximum current Irms":"36 A at 2 kW, 220 V","Nominal output power":"2000 W, 220 V, single phase","Electrical connection":"2 connectors male/female","Number of motor poles":"10","Maximum axial force Fa":"196 N","Continuous stall torque":"6.37 N.m, 220 V, single phase","IP degree of protection":"IP67","Maximum radial force Fr":"686 N","Mounting holes diameter":"9 mm","Continuous stall current":"12 A","Maximum mechanical speed":"3000 rpm","Network number of phases":"Single phase","Number of mounting holes":"4","Maximum permanent current":"36 A","Product or component type":"Servo motor","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"220 V","Ambient air temperature for operation":"0...40 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2f7ff90bbd240156deb147e21610fd76.pdf","sourceUrl":"https://www.se.com/th/en/product/BEH18LH2033MA6C/beh18-servo-motor-lexium-18-220v2-0kwl10017bit-mag-mt/"},"ai":{"faq":[{"question":"What is the BEH18LH2033MA6C's continuous power and torque rating?","answer":"Continuous power is 2000 W at 220 V single-phase. Nominal torque is 6.37 N.m at 3000 rpm, with a continuous stall torque of 6.37 N.m at 12 A."},{"question":"Does the BEH18LH2033MA6C have a holding brake?","answer":"No, this variant is supplied without a holding brake. The order code suffix indicates 'without brake' — for vertical-axis applications a separate brake resistor or external holding brake is required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BEH18LH2033MA6C","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BEH18LH2033MA6C when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}